NEW Tilt Relative to Surface in Unified Multiaxis - What's New Mastercam 2023
Рет қаралды 4,176
Жыл бұрынThe unification is complete! Unified Multiaxis now replaces four separate toolpaths. It also adds a new feature to tilt the tool along a drive surface for more efficient machine movement with a consistent stepover amount.
Try it out on your files or download our example 2023 Multiaxis Tutorial files
www.mlc-cad.com/mastercam-eve...
@mastercam 2023 #Multiaxis
@policebox1092 Жыл бұрын
Thanks for sharing
@MLCCADSystems Жыл бұрын
Thanks for watching!
@TECHIE_VLOGGER Жыл бұрын
Hello sir u have explained beautifully for solid works API vedio can u make similar vedio for solid edge API
@MLCCADSystems Жыл бұрын
I'm sorry, but we only support SOLIDWORKS products for CAD. Good luck in your search.
@joaopffg Жыл бұрын
Nice video. I have one question though. I have imported a STL model from a 3d scan and i can't use the mesh as the machining geometry. Mastercam wont let me select the model. What am i doing wrong? Am i supposed to convert the mesh into a solid or surface?
@MLCCADSystems Жыл бұрын
You will be able to select the STL as a drive surface when using Guide or Automatic as a cut pattern. If wanting to use another cut pattern create a simplified surface in the area you would like to machine and use the STL/Mesh as an avoidance as in a Clean Core technique. I hope that helps!!
@7hillscreations584 Жыл бұрын
Sir how to make that solid idol
@MLCCADSystems Жыл бұрын
Creating the geometry would require a different tool. Depending on the type of geometry it may need to be CAD software, free-form modeling, or a scan import from a scanner.
@7hillscreations584 Жыл бұрын
@@MLCCADSystems can you please tell me how in mastercam
@MLCCADSystems Жыл бұрын
The model was imported from another program, it was not generated inside Mastercam. If this is the result of a scan from an existing sculpture, you can get an idea of how that is done here: kzfaq.info/get/bejne/etZxgcx1vcfPpGw.html
@hikmatjan54 Жыл бұрын
How to install another controller in Mastercam please
@MLCCADSystems Жыл бұрын
Can you elaborate on what you need? If you already have the controller you should be able to copy it to your directories like this article: www.mlc-cad.com/easy-guide-install-mastercam-post-processor/
MLC CAD Systems
Рет қаралды 893
MLC CAD Systems
Рет қаралды 2 М.
Mastercam
Рет қаралды 3,2 М.