New to Painting? Learn to Paint Cars in Minutes!

Рет қаралды 26,186

Ай бұрын

In this video we show you how to how to apply paint, blend sealer and clearcoat all in tight spots. When you are a painter in a bodyshop you will need to know how to make small repairs to keep from going into the next panel. Learn professional tips that you can start applying right away on your project!
🟢CHECK OUT OUR ONLINE STORE🟢
www.amazon.com/shop/paintsociety
🔺Get the OFFICIAL Paint Society Paint Suite Here🔺
amzn.to/3Eq3pSf
🔺Get the OFFICIAL Paint Society Pump Sprayer Here🔺
amzn.to/49kZbsY
To Receive 10% off #Eastwoodco Products use coupon code BRIAN10 at eastwood.com
Products in this Video
DV1-S: amzn.to/44issD7
To Purchase Special Edition DV1 Spray Guns: www.autorefinishdevilbiss.com/contact
Naked Gun Cleaner: amzn.to/3SmFI4b
Melt Away Edge Blender: amzn.to/3WgGfbn
PPS 14 Oz Cups: amzn.to/4247uGJ
PPS 28 OZ Cups: amzn.to/3NV5I58
Plastic Masking for Vehicle: amzn.to/3HH7S4Z
3M Yellow Automotive Tape: amzn.to/3vBtbCa
Other products used in other videos:
CLEANERS
Degreaser: amzn.to/3Pvghgu
Prep Cleaner: amzn.to/39EvWrd
Tack Rag: amzn.to/3sMvyk5
Spray Way Glass Cleaner: amzn.to/49GUPxd
Microfiber Tear Away Towels: amzn.to/3sGjVuO
MASKING
36'' Masking Paper: amzn.to/3RiPFAv
18'' Masking Paper: amzn.to/3r6hoK8
6'' Masking Paper: amzn.to/3RbmEH3
1/2 Fine Line (Used in the video): amzn.to/3P7ULNr
3M Masking Tape: amzn.to/3raZF4b
Foam Tape: amzn.to/461jKZx
1/4 Fine Line: amzn.to/3ER7U8Z
Masking Machine: amzn.to/45IieeV
other products
Astro Sunlight: amzn.to/3NrI3HZ
Paint Gun Cleaning Kit: amzn.to/3qZ4dXM
Gloves: amzn.to/3R9C9eW
Gun Cleaner: amzn.to/3LDv2tW
Water Cleaner: amzn.to/3Budv2V
Prepping Sandpaper Starter Kit: amzn.to/3UplwPS
Prep Cleaner: amzn.to/3fZ2KPn
Tolecut Sanding Dirt Nibs: amzn.to/3PFDcEm
Griots Garage Polisher: amzn.to/3jeim2p
Milwaukee Mini Buffer: amzn.to/3G28ORm

Пікірлер: 83

@HomieHektor Ай бұрын

Brian, the type of guy to use a blend additive on his tan lines. Don’t overthink it, it’s just skin! 😄

@wyattoneable Ай бұрын

There is always something more to learn at each episode. Thank you.

@JiNX-U- Ай бұрын

Best automotive paint channel ive found. Brian you're an artist brotha

@danielheald411 Ай бұрын

Thanks to you I have just tackled my first paint project. I painted the left headlight door on my 99 Firebird. I had a lot of sanding because it had so many little spots of surface rust from all the rock chips. getting ready to do the right one before the 2K clear goes off. Thank you for helping me tackle this, while it is not 100% perfect, it looks soooooo much better now and I am happy.

@dennish9519 Ай бұрын

Another great how-to. I will be using this info soon. I had a burn thru while removing a little orange peel on a door edge. good timing!

@karlavillajulca9683 Ай бұрын

what a great video , thank you brian for the knowledge and advices

@PaintSociety Ай бұрын

Glad you enjoyed it

@ecko4ever72 Ай бұрын

So informative. Love watching your videos. N lesrning different techniques.

@RGD-Repairs Ай бұрын

The timing of thie video :D I just bought a new bumper and wings for my car, and have painted and blended up the wings.... First time blending metallic paint... and im extremely happy with the results.... All been thanks to your videos in the past :) Bonus too.. I just bought a DevilBiss Dv1 special edition too.... .and used that to paint my car parts :)

@MidnightOilsRestoration Ай бұрын

Great video Brian, you’re getting better and better brother!

@roccoelleto9900 Ай бұрын

Nice instructional video. Thanks

@Dave-gf3kd Ай бұрын

I like this channel..it’s all education, and no BS. Thank you!

@PaintSociety Ай бұрын

Thats what i pride my channel in. Ty !

@michaelogden2359 Ай бұрын

Great video as always thanks

@mushiriderchannel9087 Ай бұрын

Fantastic job

@fa2919 Ай бұрын

Perfect !

@robertedwards6438 Ай бұрын

Great video!

@wreckum56 Ай бұрын

Just got the shop coat and it is very nice and light .

@johngabucci Ай бұрын

Great content!

@richardhaviland6204 Ай бұрын

I have a kit car I will be painting and I LOVE your videos.

@geetea2220 Ай бұрын

Brian showing offf his 💪

@felipebarrera4442 Ай бұрын

Good job 💯

@mustafmaxamedxasanmustaf-su1nh Ай бұрын

My teacher thanks alot

@youtubasoarus Ай бұрын

Perfect. I'm not a painter but you can always see when a silver car has had a touch up, they never blend and there's always a mis-match between panels. This shows it is possible.

@michaelingwald6338 Ай бұрын

The DV1s is a work of art, i have 2 i use daily in my mobile paint business. I got got the DV1c for big jobs but that S is so damn good, only thing that came close for me is the ANI R160 (which i only use rarely but saves me a ton of paint with the TE cap).

@troyshepard592 Ай бұрын

That 4600 is ur go-to gun Brian

@JohnnyRamirez-zk6zj 9 күн бұрын

Hey Brian, thank you for sharing all your knowledge and experience. I do have a question....... How can I achieve a B+ paintjob outdoor on my 18yo vehicle? I do not currently have anywhere indoors to paint.

@user-bu8bc6kg4f Ай бұрын

I've painted fenders and motorcycle tanks small stuff. Ive done many job's. Paint and body work is the nastiest by far. I never got the bondo right ready to paint see a spot i missed. Don't care what anyone says. Prefect paint and body work is a frickin art.

@ollengarcia01 Ай бұрын

Do you have a video about all the different types of clear coats? Or a few you like to use?

@ghettohey2388 Ай бұрын

Hey Brain love the channel. Have a question. So going to be doing my restore on my 2001 Ford F250 this summer. The thing is I dont have a garage big enough for my truck so doing it outside is my only option. I wil say that Im going to be able to do the fenders and possibly the bed in the garage but wont be able to fit the cab so that part is going to have to be outside. With that said do you have any advice/recommendations on trying to complete this project outside

@kandyman5315 Ай бұрын

💪💪

@Blacksockmafia1 Ай бұрын

Brian, you always say use slow or extra slow reducer, but when I read on it, it says for 80+ degrees. What about for somewhere like Seattle? It’s in the 50’s here, should I still use the slow or extra slow reducer? I’m painting in my garage with no heat.

@PaintSociety Ай бұрын

50 degrees use medium

@dcautosparky Ай бұрын

Ask your paint supplier for the technical data sheet of the paint manufacturer. It will list the best level of reducer to use for their products. I know YATU doesn't allow fast reducer for 2k paint.

@jeremysmith2753 Ай бұрын

Just wondering what psi do you usually spray at with your DV1S when spraying basecoat? Ad do they use low pressure like its big brother the DV1? Thanks Brian.

@ryanmenke9554 Ай бұрын

Brian, Ryan here from california. I waited all winter, now things have warmed up. I did the respray on my honda ridgeline yesterday. With your advice to slow down while spraying, and the rest I have learned. Base came out perfect. I like spraying front fenders off the car flat. The clear I sprayed after fourty minutes. It was darn near perfect until the last spray, little run. But ive learned to watch the dry spots and hit them agian quickly keep it flowing. One bad thing, for me, YOu have to have alot of light to see. My vision up close has failed, but a bit back its 18/18 weird. Cateracks im told. Anyway , came out awesome just one little run. Thank you for all your help. Now I have four more little spots and one blend bhind rear door down then over the fender. !Have a great weekend. I did find you, but I wont bug you when your working.

@jimfeaster4837 Ай бұрын

Great video average guy is not buying this Gun I have budget of a camel!😊

@thebeddoctor4273 Ай бұрын

Can you use these guns for a big job? If i could only buy 1 gun.

@KingofStreet3 Ай бұрын

gonna save up for a 20 gal compressor, but first gotta know how much ima spend on painting a checy g20.

@PatrickHaddad-xu3ij Ай бұрын

Hi what psi you running on that dv1s set up thanks

@elchapo2485 Ай бұрын

So what’s the difference between solvent cleaner, pre paint prep, and wax and grease remover ?

@mecdj Ай бұрын

Hey Brian how come I can’t your paint suit over here in the uk ?

@jeffsimon3114 Ай бұрын

What pressure are you using on the DV1S?

@nickcrill7718 Ай бұрын

I saw a guy just use the same reducer he used for his sealer in another gun and used that as a blender.

@BigBlueMotors Ай бұрын

Farmer's tan - Ha!

@davv111d-8 Ай бұрын

Can you please make a video on how to DIY matte black with spray cans

@my357mags Ай бұрын

👍👍

@belos65 Ай бұрын

Hello! Thanks! Too many good videos. Could you please make a Video where you show how to paint a screen with Solid paint, after repairing a small damage to the screen. With metallic paint, you can put a base color over the damage and mist out a little around the damage. But not all the way to the end of the screen. Then put Clear Coat over the entire screen. And then there won't be any color difference compared to the next Door. But how do I do a job like this with Solid color? Thanks! From Tommy Bertilsson from Sweden

@chuckzamzow9 Ай бұрын

Been following you for a few year's and used a lot of your tips and tricks, always a great tutorial. My question to you how do you feel about suction paint guns? I bought one and tried it today and it actually did a good job.

@PaintSociety Ай бұрын

Old school. Much better options out now

@chuckzamzow9 Ай бұрын

@PaintSociety I agree. I just tried something different .

@danc2581 Ай бұрын

Your blend lines are looking a lot better than your tan lines at the moment. 😂 Just kidding. Love your channel bro!!!😂👍

@kkp4297 Ай бұрын

HEY BRIAN !! Do you use hardener in your metallic silver basecoat? What ratio do you use slow reducer with metallic basecoat? is it 1:1 ? I'm confused about this.

@PaintSociety Ай бұрын

2:1 no hardener

@dreamworksmarc Ай бұрын

why didnt you use the clear base coat this time? it prevents alot of halo problems

@evangelositskos8718 Ай бұрын

Can u do a masking video

@allenpearson9716 Ай бұрын

Brian, did you sand the OEM side prior to placing clear coat? It did t look stuffed up.

@deongibson3218 Ай бұрын

You have to sand that part if not the clear coat will peel 🫣

@timhudson8958 Ай бұрын

Brian do you know why the online paint stores don’t sell sealer? What do you think of spray bomb sealer like Duplicolor . My local Napa sells paint the guy ask me why do I need sealer just put another coat of base on. I would think with the base being 2-1 the reducer content would be more likely to cause edging on burn through areas.

@Finny869 Ай бұрын

@@timhudson8958 Sealer is just a super reduced primer. It isn't for covering up metal or anything less then 320 grit sanding scratches. The sealer will make for a very very flat surface for your base. Make sure you have a whole afternoon set aside to paint. You need to get your base on within a small window (a couple to a few hours). If not, you need to scuff up your sealer with 400 (red brillow pad) before you base.

@raminnajibi8343 Ай бұрын

👍 🏎

@javierlopez04277 Ай бұрын

Out of curiosity: what happens if you forget to add hardener to the sealer or just added too little? Would you need to wipe it out or just add a new layer with hardener?

@PaintSociety Ай бұрын

Yes

@rtcar6990 Ай бұрын

How long do you have to wait to clear coat ? I usually wait 1/2 hour to 45 mis from base flash.

@PaintSociety Ай бұрын

10 min

@onlyrog5 Ай бұрын

I'm slow. I need a step by step program! 😂

@kelleycoon2070 Ай бұрын

You should have a video on how to clean your guns. I don’t know if you had one I looked but right now I’m kinda of tired from work

@javierlopez04277 Ай бұрын

He's got one. I remember watching it some time ago.

@toycoma98 Ай бұрын

He spray painted a gun yellow and showed how to clean the entire spray gun. Search it.

@KeelanxHacks Ай бұрын

Brian can we get some t shirts with your logo and slogan on it? Thanks

@PaintSociety Ай бұрын

I use to sell but stopped

@thebeddoctor4273 Ай бұрын

Farmers tan. Looks like im always wearing socks lol

@kevinpacheco501 Ай бұрын

Help please. How many hours should I be flagging for a brand new bumper?

@kevinpacheco501 Ай бұрын

To prep and paint

@carlosmontiel1810 Ай бұрын

What happens if u burn it by accident

@carlosmontiel1810 Ай бұрын

Also on the blend I saw shiny spots does it matter

@toycoma98 Ай бұрын

etch primer from a spray can then sealer

@Ashpaint 23 күн бұрын

#hepoops

@eddiedagasdas-rt3mj Ай бұрын

Gdev sir Brian I'm from Philippines can I have your 1 spraygun

@PaintSociety Ай бұрын

@johnhanson1439 Ай бұрын

No hood blend? Couldn’t watch after that. Sorry

@PaintSociety Ай бұрын

Bye

@Ashpaint 23 күн бұрын

#hepoops