NEW! Veto Pro TP-LD Blackout - A Mix of the TP-LC and SB-LD
Рет қаралды 4,602
Ай бұрынJust got in my TP-LD from Veto Pro Pac.
I will have loadouts eventually, but I wanted to go ahead and share the features of the bag and compare it to an older bag you all might have, the TP-LC and the SB-LD which was also released. That way if you are on the fence you will get an idea if you need to pull the trigger on any of these bags before the Spring promotion ends.
Let me know what you think, or if you have any questions in the comments below. Thanks for watching!
The following are links to products shown in the video. Links marked (Affiliate Link) are Amazon Affiliate Links for Items in the video. I participate in the Amazon Associates Program and make a small commission if you purchase using this link at no cost to you. Thank you for your Support!
I am also working on an Amazon Store with list of tools like my favorites, etc. You can check out what I have so far here - www.amazon.com/shop/morgansma...
Also, if you would like a link for something else you see in the video, let me know and I will post it here as well.
Veto Spring Promotion (Non-Affiliate Link) - vetopropac.com/springpromo2024/
Amazon Links for Info or if Promotion is Over - Recommend Using Veto for Promotion
TPLD (Amazon Affiliate Link) - amzn.to/3USrysz
TPLC (Amazon Affiliate Link) - amzn.to/3yvYQpW
SBLD (Amazon Affiliate Link) - amzn.to/3Vacms2
#maintenance #carpentry #hvac #electrician #construction #vetopro #deals #springpromotion #electrical #hvac #plumbing #lowvoltage #fluke #knipex #wera #milwaukee #topdon #mb5b #techmct #sbld #tplc #tpld
@89dhvac Ай бұрын
This is great, they finally made one of these with a wider base so it doesn’t fall over all the time! Now we need a wider base on the tp4b!
@MORGANSMaintenance Ай бұрын
Yeah I see this as an upgrade to the TPLC. I didn’t have an issue with it being as tippy as the TPXL… but I could see that being a thing.
@89dhvac Ай бұрын
@@MORGANSMaintenance I’m using the tp4b as my main bag for commercial hvac service and it’s awesome, but it tips over ALL THE TIME! lol veto, I hope you read this!
@MORGANSMaintenance Ай бұрын
@@89dhvac I used to use the TP4B as my main service bag. It is a great option, holds a lot for its size. I’ve got so many bags now it’s moved into my house. I often sell my extras, but it was so good when I used it I always thought I’d go back to it. I’ve not tried a 5 or 6B
@gasparmora5070 Ай бұрын
I been waiting for this bag to be available, good thing i watch your videos because i didn’t get an email from veto telling me it’s now available. Thanks for the heads up, i just ordered mine 😬.
@MORGANSMaintenance Ай бұрын
Yeah good to go ahead and get a DP3 if you were wanting one 👍
@georgedavall9449 Ай бұрын
VETO City !!!!!!!!!!!!!!!!!
@MORGANSMaintenance Ай бұрын
It’s going to be a Veto Video Week…. I have two more coming (videos not bags 😂)
@jpy74 Ай бұрын
You’re such a bad influence. I’m just a home DIY’er, but your excitement and review over this bag made me go out and order one. Thanks for the heads-up on the promo. Got that, too.
@MORGANSMaintenance Ай бұрын
It’s going to be a good bag… I’m still on the fence of it I like the SBLD or the TPLD better, only time will tell. Put a cover on the SBLD and it would be hard to beat, but I definitely like the TPLD better than the TPLC. They both have their advantages depending on what you want to do with them. I got my DP3 yesterday… I may end up liking it more than all of them 😂 The promo time is always a good time… splitting the cost between two bags makes it doable 👍
@MORGANSMaintenance Ай бұрын
I filmed a video tonight moving my tools from the SBLD to the TPLD to see how they fit for people to get an idea. I may be able to put it out tomorrow
@MattHmm-rq6dn Ай бұрын
Thank you 👍 the only thing we can't veto is the strain on our wallet we make it happen when it comes to new tool bags.
@myHVAClife Ай бұрын
Co-worker Bought a new bag, got the SB-LD free and sold it to me for $60. My opinion, it is the best of the 3. Not concerned with the cover. If it is going to rain I grab my TP-XXL. SB-LD is a great quick grab option. I have a Tech-MCT, TP4B, TP6B, TP-XXL, and the SB-LD. Veto has enough of my money, hope Roger enjoys his bank statement. LOL. They are good bags.
@MORGANSMaintenance Ай бұрын
I’ve been liking the SBLD so far… I like closed bags for the weather and for appearance, but I do like that back section of the SBLD. My opinion is The TPLD is more of a TPLC upgrade now that I’ve seen it in person. It’s a little bigger, so the LC might fit someone who wants a small footprint bag better… but I use my MP Pouches as my small bags now. They do make good bags. The deal you made is an option I always recommend to people during the spring promotion. Find a friend who wants a bag and make a deal 👍
@OnusBones Ай бұрын
You're one of those who turned me on to Veto bags around the beginning of the year, with some of your videos and the giveaways. Still, I don't know anyone who can inspire the emptying of a wallet faster than Joey Morgan, PhD (today's purchase was a laser-level, although a lot cheaper than the one he showed). The TP-LD is a perfect computer tech bag. The extra room is enough space for a replacement board or two, and unlike the SB-LD (which has that area in the rear box), it has the interior side pockets for smaller screwdrivers, bits, and extenders.
@Jesus_Strong Ай бұрын
lol, man now I’m really thinking about it!
@MORGANSMaintenance Ай бұрын
@@Jesus_Strong 😂
@Nainoauyeno_ Ай бұрын
@@MORGANSMaintenance we are also forgetting the main reason for a cover for the bag. It’s too keep the residents little kids from digging through my bag while I’m working 😂
@wackyweyland8857 Ай бұрын
Excited for next year's promo 😂😂😂😂
@MORGANSMaintenance Ай бұрын
I’m not sure if I am or not, this years cost me 😂 It only cost me for a little while though, I will definitely have to offload some bags this year, but that’s hard to do while the spring promotion is going on
@OnusBones Ай бұрын
I am too, not that I need another bag! Funny thing is, chances are it will be the free bag that interests me most.
@wackyweyland8857 Ай бұрын
@MORGANSMaintenance You'll sell your spare bags so it won't be as bad. As a first year customer, Veto made some money off me, too. 🤣
@MORGANSMaintenance Ай бұрын
Yeah, I keep all my bags clean enough that I don’t lose much on them when I sell them. I basically end up just paying an” small “upgrade fee” most years when it’s all said and done.
@Nainoauyeno_ Ай бұрын
You done did it again..
@MORGANSMaintenance Ай бұрын
😂… 👍👍
@Nainoauyeno_ Ай бұрын
@@MORGANSMaintenance making me spend more money on stuff after watching your videos 😂
@MORGANSMaintenance Ай бұрын
@@Nainoauyeno_ I have to drag you all down with me 😂
@MattHmm-rq6dn Ай бұрын
Look shinny 🎣 almost gotcha
@kiwe3546 Ай бұрын
I bought the MP2X based on your comparison video of the MPX/MP1X/MP2X. And I just ordered the Tech Pac Blackout. Definitely do a load out of the TP-LD Blackout. I’m also more interested in that than the SB-LD because of the cover.
@MORGANSMaintenance Ай бұрын
I may have some time to move some tools around one day… I still haven’t got in my MB5B yet 😂 I love my MP pouches, I use them more than anything
@MattHmm-rq6dn Ай бұрын
Of course do loadout video! I really do like the black and this was catching my eye in the beginning if the promo but was out of stock so I got something else for the dp3. This is one of te few bags the v swap pannels really is appealing. I would like to see what our current setup would look like in that and you may have talked me into another bag. Plus it's black!
@MORGANSMaintenance Ай бұрын
Yeah, the promo still going pulled me back in. I’m interested in that DP3 for a meter/tool pouch. Going to see how that works out
@MattHmm-rq6dn Ай бұрын
So is that a commitment to a loadout video?
@MORGANSMaintenance Ай бұрын
@@MattHmm-rq6dn I will try and do one before the promo ends if I can.
@MattHmm-rq6dn Ай бұрын
Check out rays apartment maintenence recent video he's using a car detail seat from hf and it may cause me to reccend my comments on mechanics seat for outlets. It may be a excuse for you to go to hf?
@MORGANSMaintenance Ай бұрын
@@MattHmm-rq6dn I will see if I can find it. I’m subscribed to him, but his stuff doesn’t hit my recommended often either
@OnusBones Ай бұрын
Love it! Mine should be here today. Another huge difference is the SB-LD is missing the interior side pockets on both sides that BOTH TP-bags have. Veto could add those to the SB-LD for a huge improvement for carrying smaller tools, bits, or extensions.
@MORGANSMaintenance Ай бұрын
Yeah, you can tuck stuff in there on the SBLD, but it’s hard to get out. You definitely can’t stick a pair on 10” cobras like you can on the TP’s
@jaydoherty8402 Ай бұрын
Nice bag. It’s a little more similar to the TP-LC than I expected, but definitely seems like a nice upgrade/refresh to that bag.
@MORGANSMaintenance Ай бұрын
I thought the same thing when I opened it.. I was like, I’ve seen this before 😂 It is a little more roomy and less tippy (not that I had a tippy problem with the LC). Big advantage is removing panels if you want for options. I do feel like it’s definitely more like the TPLC than the SBLD I’m sure they will likely do a LC Blackout at some point.
@rguevara83 27 күн бұрын
I just received my TP- LD. I absolutely love it. I was currently using an overstuffed MB2 blackout for HVAC. The replacement bag fits all the items I had in my previous bag, but with better organization. I was very close to purchasing the Veto TP-XD based off your video. The Spring promotion came around and saw pictures of the TP-LD. I could not decide between the two bags because they are very similar, but I decided on the. TP-LD. One of the bags is wider and one of the bags is deeper. Could you do a video comparing and contrasting the two bags. I was curious as to whether or not the items that fit into a TP-LD will fit an into a TP-XD?
@MORGANSMaintenance 27 күн бұрын
If I had a TP-XD I would, but I don’t have one of those. Maybe someone on here does though and they can give you an idea. I never liked the MB bags for tools for the reason you said… hard to organize since it’s mostly just open space
@coburn_karma Ай бұрын
Get two TP LDs and hook them up like saddle bags.
@MORGANSMaintenance Ай бұрын
Would look nice on a bike… or a horse I guess 😂 👍👍
@user-sp5eh7km7j Ай бұрын
Its only money, one can never have too many Veto bags, OT-LC for plumbing, SB-LD for light HVAC troubleshooting in my SUV, Tech MCT and TP-LC in Svc truck plus each vehicle gets an MP1X for little stuff and a bunch of back ups in my tool room. Plan on getting TP-LD with DP3 before end of promo.
@MORGANSMaintenance Ай бұрын
That’s what I always say.. it’s only money… I can make more. You have to enjoy things or what’s the point 😂
@adjutant 13 сағат бұрын
on the front of your SB-LD, what's that you've got on your measuring tape holder? some kind of attachment for morale patches? I would like to know more 🙂
@MORGANSMaintenance 12 сағат бұрын
I made it out of a scrap piece of Aluminum and a tape measure clip. Then I just put some of the hook/loop stuff on it.
@Stefan_Kawalec Ай бұрын
So if you found a perfect bag, do it mean you won't buy any more? Wink, wink... Very good review. If I wanted to buy any of those this video would tell me everything I need to know.
@MORGANSMaintenance Ай бұрын
There’s always the next new one 😂… we will see next spring what kind of arm twisting they do. I definitely won’t buy one till then.. I think.
@Stefan_Kawalec Ай бұрын
@@MORGANSMaintenance I've made a terrible mistake with that "do it mean". Sorry. I like when a bag/backpack/shoes, especially the ones I use in work, don't change. I wish some models of shoes were made for 100 years. So I usually not only don't wait for the next model, but I'm rather anxious what they gonna spoil in the next instalment.
@MORGANSMaintenance Ай бұрын
@@Stefan_Kawalec my brain read right over it.. it read, does it mean.. wouldn’t have even know had you not said anything 😂 I have those thoughts with certain things as well, they more often ruin things instead of making them better. Pretty rare that the sequel is better than the original.
@lockhammer3481 Ай бұрын
I like that TP-LD I have been looking for a replacement for a toolbelt , I’m getting too old to rock a tool belt on my tired old hip, If I carry this with a shoulder strap. It can hold more tools also to keep me from walking back to truck that I can’t keep in a tool belt. I usually keep my tools in the trunk and have to gather them up after they spill out. I think I’m sold I’ll gift tool belt to the young guys.
@MORGANSMaintenance Ай бұрын
It does look like a nice medium sized bag… one you can’t make overly heavy 👍
@saucyg6371 Ай бұрын
Maaaan I want this now too. I want the MP2X, but its not as much of a need for me as the Tech Pac Blackout is because i need a durable backpack. Being a commercial electrician, I dont want to be treading my packout around in th dirt or mud for 3/4 of the duration of the job, especially when most of the time i just need my drills and hand tools. I’ll probably pick up the TP-LD or the MP2X for the spring promotion next year. Need to see how that LC fairs in comparison to my TP4b
@MORGANSMaintenance Ай бұрын
I think it will be a good bag. I got the LC after my TP4B… I think I even have a video putting my TP4B tools into my TPLC to see how they fit
@saucyg6371 Ай бұрын
@@MORGANSMaintenance ill go back and check it out
@gpraceman Ай бұрын
Think I'll stick with my SB-LD. I rather like the rear compartment for my lesser used tools and pouch of bits and bobs.
@MORGANSMaintenance Ай бұрын
I like that myself too. Hopefully they come out with a similar with a cover
@danyeurgt 4 күн бұрын
Omg just show us
@MORGANSMaintenance 4 күн бұрын
👍
@llanbull Ай бұрын
Boss man, can you review the harbor freight multitool version of wave made by gordon. I just saw it on their site under new tools. $39.99.
@MORGANSMaintenance Ай бұрын
It deleted my reply saying I’d check it out, but I ordered one today…. Appreciate the suggestion 👍
@ovidiuandrei8087 Ай бұрын
Will the v-swap front tool panel fit inside the TP-LC size wise ? It’s one of the features I like on the new bag and I’m thinking of retrofiting it to my TP-LC (perhaps cutting off the two inside small pockets and sewing some velcro to which the v-swap panel can stick). Thx
@MORGANSMaintenance Ай бұрын
It is the same size area, so it should work if you wanted to try it
@three-phase562 Ай бұрын
Think I would stick with the SB-LD, I like to have the meter and leads separated from the tools for my loadout. Or I have a separate meter bag, but it is slightly more awkward to carry two bags together than the on SB-LD, which I find nice.
@MORGANSMaintenance Ай бұрын
I have really liked the SBLD so far. I know I will sell my TPLC likely for now as this definitely replaces it for me. Just for the options of removing things. The TPLC is a smaller bag which is nice at times, but that is basically what I use all my MP pouches for.. I will use both LD’s over time and see if one stands out as more useful… or maybe I run them both, but for different stuff/weather
@Justin-C Ай бұрын
I'm in the same boat, and glad not to be tempted to buy more! SB-LD is great bag - especially having gotten it as a freebie. That said, I have two wishes to make it 'perfect': a protective flap for the main compartment, and side attachment points like the TP-XXL (my main bag), so I can hang an M12 drill or impact. I might make a flap myself using some magnets.
@MORGANSMaintenance Ай бұрын
@Justin-C agree with all you said. I like the flap for the rain, but I also like the clean look of a closed bag.
@three-phase562 Ай бұрын
@@Justin-C Looked at the TP-XXL a few times but not indulged myself yet. A cover for the SB-LD would be nice, maybe Veto could make one as an option if there is enough call for it. I also carry tools in the side pouches though, so they are still exposed to the elements unless I go poncho style cover.
@rjf2732 Ай бұрын
This reminds me more of the TP6B that was free in the promo last year but with a cover… They do look so much better in black though! Something you might be interested in checking out if you can get hold of it in the US… Hultafors have a bucket they sell an insert/liner for to create tool pockets. I find it really useful if I don’t want to take all my gear into a site. I leave it empty in my truck then I can just grab exactly what I need and it’s all nicely organised rather than dumping it all in a big open bucket
@MORGANSMaintenance Ай бұрын
I think it might be a lot like the 6B… I didn’t get that one, or seen it. I will look up the Hultafors 👍
@OnusBones Ай бұрын
Home Depot had (has?) a bucket-wrap with tool pockets in it; I think we got one, that Sonia uses for garden tools. I suspect the TP-LD will be just about perfect for me, likely with the front pockets removed for some bulk space.
@MORGANSMaintenance Ай бұрын
@OnusBones I may end up doing the same depending how stuff fits in the sides
@Milkym0o Ай бұрын
Not a fan of the Blackout line. I think the original look is more distinct and on site Blackout looks rubbish once it gets a bit of concrete dust sprinkled on it. I also have no desire to be using V-Swap! SB-LD with a cover would make it a perfect tester/2nd fix bag for me!
@MORGANSMaintenance Ай бұрын
I like the idea of VSwap just because it gives you options, but I don’t typically use it. I like both color options, but I’m like you.. I may actually prefer the OG.. but the blackout bags I have MCT, etc have extra features I prefer.
@Quietvibes07 Ай бұрын
Have you ever done a review of your fluke 324? How do you like it?
@MORGANSMaintenance Ай бұрын
No I haven’t. I’ve had it for quite some time and it would be my Meter of Choice for what I do. There isn’t much I need a meter to do that it doesn’t do.
@Quietvibes07 Ай бұрын
@@MORGANSMaintenance great thank you!
@brianmartinez7530 Ай бұрын
Did you get the free drill pouch for the tpld purchase?
@MORGANSMaintenance Ай бұрын
Yes I did. I haven’t got it yet, but it’s on its way
@gonzalez7805 Ай бұрын
How much to have a cover put on that bag?
@MORGANSMaintenance Ай бұрын
I have no idea. If I knew someone locally that could do it, I might would take my LC and see if someone could.
@VRCM_Skywarn_XUSA Ай бұрын
I have to use ... A plastic box, in a backpack is good enough. It's just gonna get stolen, by cigarette smoking cartoon characters with daddy/drug problems. ❌🚬 🤡🤞 🎒🪛🛠️❌
@MORGANSMaintenance Ай бұрын
That can happen depending on where you live… stinks
@MattHmm-rq6dn Ай бұрын
You haven't seen how I and my other workers keep an eye on there tool bags like there livelihood depends on it. Everything goes back into the bag when I leave in its place. Turns out I don't loose tools it's our version of rhe corvette in the driveway for a retired person.
@MORGANSMaintenance Ай бұрын
@@MattHmm-rq6dn I have to do that occasionally on job sites where I’m a sub. And working around others I don’t know yet. It’s always hard to tell if they are curious about tools they haven’t seen.. or if they are scoping me out 😂
MORGAN'S Maintenance
Рет қаралды 6 М.
Gufee.medalin
Рет қаралды 9 МЛН
American Electrician
Рет қаралды 18 М.
MORGAN'S Maintenance
Рет қаралды 105 М.