NEW VIDEO! D.I.Y. REPAIR! How to replace a window regulator on 2006-2010 model year Hyundai Sonata.

No video

NEW VIDEO! D.I.Y. REPAIR! How to replace a window regulator on 2006-2010 model year Hyundai Sonata.

Рет қаралды 15,010

Күн бұрын

In this video I discuss on how to remove and replace a window regulator on a 2006-2010 model year Hyundai Sonata.
Tools needed for this repair....
Time and patience
A favorite beverage of your choice
3/8 rachet wrench
10mm socket
T20 torx socket or T20 allen wrench
Phillips screwdriver 🪛
Flathead screwdriver 🪛
Hook tool

Пікірлер: 45

@allenc.christy8201 2 ай бұрын

Great instruction video on this replacement. Thanks a million for taking the time to make this. I have a 2007 Sonata and this rear window regulator just failed for no reason. Could not replace it without this video. Thanks again

@itsahsah 6 ай бұрын

About to try this out on my friends car and this video was super helpful thank you!

@lawjo1978 6 ай бұрын

Thank you for the feedback. Let me know how the install goes.

@figulous 7 ай бұрын

Very cool calm collected way of explaining what you’re doing . Thank you 🎉💙

@lawjo1978 7 ай бұрын

Thank for the feedback. I appreciate it greatly 🙏🏽

@tage202 4 ай бұрын

Great video. I have the same car and issue. Very helpful on getting started. The biggest challenge for me was removing the glass from the regulator. I ended up having to break the plastic holder. No way around it. I had to purchase a rivet gun to install some pieces that came with the panel. I also couldn’t save the speaker because it was also held in place with a rivet screw. The newer regulator doesn’t come with a screw to hold the glass. You basically snap it in and no screw and glue needed to hold it in place.

@stevhandingwall2028 4 ай бұрын

Mine is messed up too I can’t get it off because I can’t force the glass down to find the two 10 mm bolts to loosen

@LoveTravel-fv1jn 4 ай бұрын

I am having same problem. Can't open beacause of window glass

@MrMetacomGaming 4 ай бұрын

I just broke the plastic piece that held the window into it. I went to the hardware store and got some screws with wing nuts and locktite to put the speaker back in

@tage202 4 ай бұрын

@@MrMetacomGaming good job. I tried drilling out the rivet screw but drill bit kept slipping.

@riderordonez5748 10 ай бұрын

Thanks for your video it helps a lot

@lawjo1978 10 ай бұрын

Thank you for the feedback. I'm glad the video helped you out

@LorneMaxwell 6 күн бұрын

Mr Jones great video. My question when you install the new regulator, does the plastic peace with the three fingers need to be used? I thought I saw a video where it was not needed.

@FlipBuck 7 ай бұрын

Thank you for the video!

@lawjo1978 7 ай бұрын

Thanks for the feedback FlipBuck! I appreciate it

@tomjudson258 6 ай бұрын

Thanks Mr. Jones

@lawjo1978 6 ай бұрын

Hey Tom, thanks for the feedback. I appreciate it greatly 🙏🏽

@TypicallyUNIque13 5 ай бұрын

Hello Great video! It was hell getting on off, i had to go up and over the plastic peice closest to me and it popped off. Wish i had it on video.. Im almost done with mine Problem im having: getting the glass to connect back onto the plastic piece?- 3/5 i added a box underneath and pushed the glass down until it connected. Thanks!!

@ashokmoghe8035 Жыл бұрын

Hi Thanks for the video. I am working on my 07 Sonata (same window as your video) so this is useful. One question since you had that window plastic piece holding the glass that broke off - will my new regulator come with its own plastic piece if I break mine as well while taking out? or do I need to buy separate part for that? Thanks in advance for your help and videos.

@lawjo1978 Жыл бұрын

Good Morning, the new regulator will come with the plastic piece as stated

@ashokmoghe8035 Жыл бұрын

@@lawjo1978 Thank you for such a prompt response.

@jrzyhockey1162 Жыл бұрын

Thank you

@vickir8739 Жыл бұрын

I'm having trouble getting the glass to release from the regulator. Your video showed that you had trouble but not the solution. Can you give a couple hints on how to make that release?

@lawjo1978 Жыл бұрын

Hello Vicki, You have to lower the window down a little bit. Maybe about halfway or so. And what you're see is a screw. You have take that screw out. And once the screw is out. You will need a flathead screwdriver 🪛 preferably a wide one if you have one. And you have punch out the area out where the screw was and it will release from the regulator

@bradnewton1680 3 ай бұрын

@@lawjo1978 Yeh it took me several attemtps of fing with it to finally get it to release....I'm still not 100% sure what I did that worked...

@lawjo1978 3 ай бұрын

@@bradnewton1680 Hey Brad, that tab that holds that window in is a real pain in the a-s indeed.

@macetherebel733 11 ай бұрын

Hello how do i get that part of the cord that i will have to fish throw the regulator apart i can’t figure it out . I am using a flat head .. but i feel like i am about to break it

@lawjo1978 11 ай бұрын

Hello Mace, did you take the screw out from the bottom of the regulator?

@macetherebel733 11 ай бұрын

@@lawjo1978 yes .. But ended up getting the cord a loose … it just took a little work. Thank you so much for replying tho.

@Slicpartna Жыл бұрын

Nice video, Have you started on the Cadillac?

@lawjo1978 Жыл бұрын

Good Morning my brother! Hope all is well with you. Thank you. And yes I'm finally getting to it. I'm gonna have an update video for it very soon.

@Slicpartna Жыл бұрын

@@lawjo1978 cool, I'm looking forward to seeing the Cadillac build

@lawjo1978 Жыл бұрын

@@Slicpartna Most definitely good brother. Can't wait to show you the progress

@aaronwilliams6562 Жыл бұрын

How you doing mr. Law Jones was curious to know what kind of fuel mileage are you getting on your 98 suburban since the about to do the same thing on my 99 suburban

@lawjo1978 Жыл бұрын

What's going on Aaron. Thanks for reaching out. Greatly appreciated. Since I did the swap on my suburban I get 14 mpg with the a/c on or off and I get 19.5 mpg on the highway. And those are real numbers on my suburban

@aaronwilliams6562 Жыл бұрын

Thank you for the reply I LS swap 2500 Crew cab I'm from Houston now going to start the ls swap on a suburban

@lawjo1978 Жыл бұрын

@aaronwilliams6562 We almost neighbors. I live in Dallas. I was just down there almost 2 weeks ago. I'm in a couple of Cadillac car clubs down that way.

@MrGilMoNayO Жыл бұрын

how did your detach the door lock actuator? I can't figure out how to do it. (solved)

@lawjo1978 Жыл бұрын

Hey MrG, When I did this repair I don't recall if I removed the door lock actuator. When I get a quick opportunity I can make a video showing how to remove that if that helps.

@MrGilMoNayO Жыл бұрын

@@lawjo1978 thank you I actually figured it out it was just how to unclip it that I was struggling with

@ilovehaters1977 2 ай бұрын

I’m struggling to get the harness unplugged from the actuator any advice? Thanks in advance.