This is the one about the helicopter. You went fast, and this is the interesting thing because it has happened to toys before and I think I had a few of them where it happened. It didn’t happen in high voltage, but this one did. Did you hear that the gear actually got destroyed? Well, this is the reaction. What it basically did is when the gear is actually getting destroyed it started stripping and then you can hear loud grinding. That grinding means that the gears about to split. So the faster you go the faster you go the gear will start melting and stripping and it’ll shatter that’s causing it, stop the grinding and it’ll get soft and softer until the motor starts going buzzing. So this is interesting. When you make other videos like this, I’ll be explaining in this one the whole thing about the high voltage. If you want any more questions then feel free. I’m just giving you an explanation about how it happened. Pretty much my ears are open and I’m not saying anything rude. But the high voltage videos you’re making are really interesting because the gear stripping and then the split gear,every time I explain to you everything. If you have any more ways that I can explain to you more about these gears the only ones I have left are part nine and part eight just to make sure what the video is in these. Awesome. Special explanation and then give me some credits. Please.

There’s also one chance that there could be other videos where the grease in these toys start drying up and after dries up then you can tell that the motor starts to stop spinning, and if you give me the highest voltage and it tries to spin with that completely dry grease, the motor will catch on fire. Like this never happened, but I already know that because I’ve heard those effects before. To people it has happened when they get toy robots that they don’t do high voltage with because you can tell that a motor is stuck, it cannot move, and then there’s some toys that when it tries to move the grease is not enough. That’s pretty much what most things do. The hotter the motor, the dryer the grease.

The dog video. It was the same thing with the unicorn, but it was a little bit less. The faster you go the same deal will happen like the unicorn did. So, not be careful, but if you go faster than make sure to listen to what’s happening because it’s nothing bad, the interesting things. Make sure, when you make another video of the destruction of the gear then I’ll tell you what it’s all about. And all about the whole. This is pretty cool because when the motor got louder than first of all, you had a grinding. In this one, in the dog, did you hear it grinding? If you did, then that means the gear is almost splitting. And then when it split completely, then it started doing the same thing like in this video with the unicorn. I mean, I am really convinced. Not convinced, I am really impressed about these videos. Though the motor gets really loud and really interesting, high voltage videos are pretty interesting, but I’m never ever gonna do this.though you’re learning new things so feel free to ask me about the reactions and I’ll be delighted to explain them to you. Whenever you make another video like this, feel free and then comment down before people comment back. Ask me a question, what was the reaction or what was the thing it did. I’m gonna go and listen to the one from the rabbit, but remember, I’m only fast forwarding to each part only when it gets towards the end so I can tell you the reaction. In the rabbit video, I’m gonna keep telling you, but when you get zero comments in these videos and I’ll be free to tell you all about the reactions.

Explanation. I listened to it on my desktop computer where I didn’t have my channel, but here’s the explanation of the gear destruction. At the end, it wasn’t even a strip gear, not the gear destruction, at the end, tried to move, but it was trying to move with that fast speed, not only destroyed itself, but it actually started stripping. So can you tell that the motor that it was going a little bit slower but it was still getting faster when I tried to move? That’s basically something that sometimes happens with some toys without the high-voltage. Here’s an example. Have you watched the video from a KZfaq channel where they had the turbo fighter first generation with the drill gun? When it said before repair, you can hear the toy truck to walk, but something inside gets stuck to it where the motor is still going, but pretty slow And it’s seen that there’s something inside that was making it stuck, so that’s why it was going slower, and then it tried to move again. That’s basically the explanation if you listen to the ending part. So if you were even faster and faster, it was still doing that. The fast thing and make it go, the more stripped it will get that it will not move anymore that the motor will still go, but even though the toilet will not move, and that piece is completely, almost about to get stuck because of the high voltage, the faster you go, that piece will get melted and melted and melted until it starts losing it. You can move, but it won’t move correctly because it got completely stripped, and the body was completely loose. Like you can hear the body at the end, trying to move, but the faster you go, and the faster you go that’s what happens. so, this is really interesting. Eat reaction which I’ll explain video. If you don’t mind, feel free. Feel free for me. If you have any questions on the reactions that I am able and delighted to answer them. So be aware after the answer once I watch it, and if you get the same reaction or different reactions, then you can ask me in this particular video when you make the next video and even higher, that means that I can actually explain to you what actually happened. More will happen. So in the other parts, I listen to the end part without listening to the whole thing rather than just the ending and I’ll come back to this video and explain to you each reaction. How does that sound?

The rabbit. This one at the end got way worse. It did the same thing as the unicorn but here’s the catch. You can hear the gear starting to split, then the motor started losing its grease and drying and drying it up, where at the end, when you heard it being moving, you can tell that the motor it was moving fine, almost at the end, but one second later when the gear stripped, and it started moving, where it got stuck, you can hear loud squeak. Loud squeak means that I got really really stuck in the gear started splitting in the piece that makes it move Started getting stuck. The faster you go, the more it gets unstuck and then stuck until it gets one part that actually get extremely broken and then you can tell like I said in this one, the helicopter, Gyro wheel can get really loose and shattered with the gear inside. This one, faster you go, Will shatter, body will be extremely loose and it doesn’t let it move. This one with the unicorn kinda did the same thing. The dog, same thing as you can tell, I’m pretty much in the right tracks because these three did that. The helicopter was doing the gear grinding. That’s pretty much what I actually did. If you make another video of it, you can actually comment down on it first to edit it and then you can tell you the answerwhenever it happens. Because I am interested in this. It was really interesting, but I’m not being mean, but even though it’s dangerous and the gear gets split, the faster you go, when it splits the gear, it’s my job to explain to you the whole reaction. Don’t get upset, but it’s my job for me to explain to you the whole reaction of how everything happens.

There’s also one chance that there could be other videos where the grease in these toys start drying up and after dries up then you can tell that the motor starts to stop spinning, and if you give me the highest voltage and it tries to spin with that completely dry grease, the motor will catch on fire. Like this never happened, but I already know that because I’ve heard those effects before. To people it has happened when they get toy robots that they don’t do high voltage with because you can tell that a motor is stuck, it cannot move, and then there’s some toys that when it tries to move the grease is not enough. That’s pretty much what most things do. The hotter the motor, the dryer the grease.