No video
New Waterjet Unboxing, Install and Shenanigans | 5-axis Flow Mach 200
Рет қаралды 579,130
Күн бұрын
@havokvladimirovichstalinov 5 жыл бұрын
That's the cleanest that tank will ever be
@Joshua79C 5 жыл бұрын
That is the cleanest any such tank first looks when newly minted and set up.
@bigchungus1391 2 жыл бұрын
@@Joshua79C duhh
@saunit8984 5 жыл бұрын
Big and awkward? Did you order a waterjet or another Mitchell?
@suckyerfilthymother 5 жыл бұрын
Austin Glickman yes
@maybesomeothertime5054 5 жыл бұрын
Water jet unboxing I’ve seen it all
@telenisis 5 жыл бұрын
More like uncrating
@SentinalSlice 5 жыл бұрын
Telenisis but what is a crate if not an arrogant box?
@telenisis 5 жыл бұрын
@@SentinalSlice more like a thicc box
@albertbatfinder5240 5 жыл бұрын
KZfaq is filled with water jet unboxing videos. This is arguably one of the best.
@pirateking3918 5 жыл бұрын
A body unboxing?
@DONK8008 5 жыл бұрын
So Mitchell, did you lick test the installer to confirm he was an actual water jet installer? You may have got scammed if not.
@zerodamonsta942 5 жыл бұрын
911 I would like to report a crime
@asvarien 5 жыл бұрын
He was the Zen master of water jet installers, didn't you see the beard?
@meeeeee423 5 жыл бұрын
He seemed like a pretty good guy
@DONK8008 5 жыл бұрын
@@asvarien But the beard would need a lick test to confirm it was not a fake beard.
@PugGod26 5 жыл бұрын
12:15
@DanielRichards644 5 жыл бұрын
You know what sounds like a good Idea? Lets put the LARGEST PIECE OF EQUIPMENT AS FAR AWAY FROM THE DOOR AS POSSIBLE!
@pws3rd170 5 жыл бұрын
Its getting through the door thats the real problem. honestly, so what it takes them an extra hour to set up, they need to optimize their shop because they will probably be using that same machine in 10 years
@DanielRichards644 5 жыл бұрын
@@pws3rd170 you do understand what a joke is right? Who are you Ted Mosby?
@princeofdeath7696 5 жыл бұрын
@@pws3rd170 If you have the clearance around the door then getting it in is actually pretty easy. I used to bring 16Ft lumber through 12ft doors all the time.
@KronicDaydreamZ 4 жыл бұрын
@@princeofdeath7696 I bring 24ft stock sheets of grating in with a hi lo
@Redbird45 2 ай бұрын
@@DanielRichards644well a joke is usually funny
@mrfluffytailthethird 5 жыл бұрын
So that’s how they make watermelon infused water
@dimitar4y 5 жыл бұрын
except they watermelon jet whole watermelons into the water. That's right! They cut through water.
@MurcuryEntertainment 3 жыл бұрын
New 5 gum watermelon.
@hoggerstv6249 3 жыл бұрын
Water infused watermelon
@kylejohnson6327 5 жыл бұрын
Woman: I bet he's thinking about another girl Man: I wish I had a *5-axis Flow Mach 200*
@homiespaghetti1522 5 жыл бұрын
Pretty much the only thing a man would want
@SomeNot 5 жыл бұрын
@hotaru25189 a comparable model to the one in the video from 2008 is $100,000 used. I have seen some smaller ones as cheap as $10,000
@RealNickTheCoolest 5 жыл бұрын
Something Nothing this model retails in the neighborhood of $250,000 I’m pretty sure
@SomeNot 5 жыл бұрын
@Sonac No, a 3 axis one from a different company.
@kylescott2350 5 жыл бұрын
Hehehee
@x31omega 5 жыл бұрын
My only question is did you find the skateboard wheel when you cleaned up the area...???
@DONK8008 5 жыл бұрын
They found it a while ago embedded in the ceiling insulation.
@brianartillery 5 жыл бұрын
@@DONK8008 - Yes, that was in there a good way. So, if you ever need to punch a hole in your ceiling in a potentially lethal way, you just need a waterjet, and a skateboard.
@ThebigNut 5 жыл бұрын
I’m curious can you make a video on some of the differences between the two of them
@antoniskazou 5 жыл бұрын
Probably more PSI and a larger area to cut stuff
@xenonram 5 жыл бұрын
The new one is 5 axis, with an updated controller. The old one is only 3 axis. Other than that, not much is different.
@rhinothedino2654 5 жыл бұрын
@@antoniskazou same psi
@swordscar6278 5 жыл бұрын
Around 100k psi
@yaboycyn 5 жыл бұрын
Yo is that the real big nut
@maxwhite4732 5 жыл бұрын
This has to be one of the biggest unboxing videos on youtube. *unbox therapy wants to know your location*
@AriaPosting 5 жыл бұрын
old waterjet giveaway?
@alexp9962 5 жыл бұрын
Or for sale?
@armyboy0579 5 жыл бұрын
WaterJet a WaterJet?
@user-hw1jf8rm1k 5 жыл бұрын
Moiby
@jacobkaltz1958 5 жыл бұрын
Yes please
@noahlail4018 4 жыл бұрын
Hey mom I won a water jet where can we put it?
@imthesquareroot6125 5 жыл бұрын
Installer just shrugged his shoulders like "Eh I'm not really in a big hurry to get this done"
@wojciechbieniek4029 5 жыл бұрын
If I'd be paid as much as he is for the hour, I wouldn't be in a rush myself.
@knightwolf3511 5 жыл бұрын
@@wojciechbieniek4029 if i was the installer i would have a hard time rushing because i would be more laughing
@zalmaflash 5 жыл бұрын
The factory tech doing the installation was TOTALLY IMPRESSED. Good job. He will probably want both of you to do all future installation tests across the country. ATTA BOY(S)
@2MeterLP 5 жыл бұрын
11:28
@cade8986 5 жыл бұрын
Video idea: Toyota vs Nissan forklift tug-of-war
@cade8986 5 жыл бұрын
Mosquitobrain my Xterra out-pulls FJs everything so idk🤷♂️
@BitchyBoxxy 5 жыл бұрын
Mosquitobrain wins what the how to let everyone else know I’m Mexican.
@blackoak4978 5 жыл бұрын
They both suck. Give me a Crown
@bathbomber 5 жыл бұрын
can you see what happens to a prince rupert's drop when hit by a water jet?
@jddmbth1 5 жыл бұрын
They should collab with smarter every day for that
@Matt-dy7uq 5 жыл бұрын
It explodes
@natalieisagirlnow 5 жыл бұрын
@@Matt-dy7uq the waterjet?
@Matt-dy7uq 5 жыл бұрын
Nate Walkner yeah why not
@kitty-catmint 5 жыл бұрын
Matt XD
@electronicsNmore 5 жыл бұрын
That shop must be doing very well to spend 125K - 150K on a new system. So it's not all play after all! :-)
@flouro4782 5 жыл бұрын
yea huh
@WaterjetChannel 5 жыл бұрын
Now we can make twice as many circles
@shorty808100 3 жыл бұрын
They make circles lol
@somethingillregret 5 жыл бұрын
"Uhhh... why is there a grapefruit, watermelon and cantaloupe with a hole cut in them in the bin?" *panicked stuttering* "WE WERE TESTING THE NEW WATER JET!"
@brianartillery 5 жыл бұрын
Nice clean wall for Mitchell to throw clay at. You can hear it crying out for some hard clay action.🤔
@robertwarne7702 5 жыл бұрын
I also work with water jets but in an industrial scale. All my equipment is portable and its 40,000 psi. I go into refinerys and such and cut out reactor's and big piping and such. Love your channel guys.
@guusvanwezel2429 5 жыл бұрын
That will be some very nice cut circles now!
@nonothebot 5 жыл бұрын
This new waterjet is worth at least 250 000 new subscribers !
@Mr._Sandman 5 жыл бұрын
I bet they made that installer's day. He probably went back to the office, talking about these guys to his co-workers. 😂
@sssquidy3437 5 жыл бұрын
Next video: *cutting a water jet in half with another water jet*
@17industries42 5 жыл бұрын
SS Squidy *how did you edit your comment and not fix the spelling error*
@armandogonzalez6822 5 жыл бұрын
You guys should do what some other guy said Toyota vs Nissan forklift tug of war I’d love to see it
@WaterjetChannel 5 жыл бұрын
Haha, that would be pretty funny
@masonrains5010 3 жыл бұрын
@@WaterjetChannel yes please
@SilverFox0784 5 жыл бұрын
So is it a 60,004 psi waterjet?
@Sharpless2 5 жыл бұрын
yes. Its to cut those materials that 60000 just isnt enough for.
@mralabbad7 5 жыл бұрын
Plus It can punch you in the stomach
@F1u0r 5 жыл бұрын
It actually has 4250 bar, so 61,641 psi^^ The Mach 500 could be bought with an 6500 bar pump, so almost 95,000 psi :O
@Sharpless2 5 жыл бұрын
@@F1u0r But is there really a need to go over 60000 psi? because the only hard time waterjets have is when cutting aluminium nitride ceramic plates. 60000 psi waterjets will cut everything.
@F1u0r 5 жыл бұрын
@@Sharpless2 No, not really, but it would be faster :D And maybe you don't need as much abrasive?
@MrTheKing1286 5 жыл бұрын
There better be a “Waterjet cut in half by Waterjet (in slomo)”
@RamadaArtist 2 жыл бұрын
Having recently binged many dozen of your videos, this might be my favorite so far. Those underwater shots had a unique kind of artistry and I'm glad you took the opportunity to get them.
@jameshunt4200 5 жыл бұрын
After seeing them cut that watermelon, they definitely need to do a Halloween special by carving a pumpkin!
@dcrispell7 5 жыл бұрын
Installer: Ok, so I've finished installing your new water jet. Let me discuss your warranty with you. Dan: Hold on, we need to cut a watermelon first! *uses water jet in a way that is clearly not in the user manual* So, you were saying? Installer: Nothing, never mind.
@armyboy0579 5 жыл бұрын
You got to wonder if the delivery guys knew these are the WaterJet Guys?
@WaterjetChannel 5 жыл бұрын
Haha, it actually went a lot like that.
@KnappstersaurusRex 5 жыл бұрын
I work with CMMs so it was really interesting to see another big precision machine get installed and calibrated! I'm looking forward to see what kinda weird shit y'all do with this thing!
@niallwexeire 5 жыл бұрын
I legit thought you guys rented a new place, it was that clean haha
@plasmaeskamite7507 5 жыл бұрын
That is one of the most beautiful piece of machinery I have EVER seen!
@robertasbell824 5 жыл бұрын
You have to lick test the waterjet to make sure it's authentic
@bigrone5153 5 жыл бұрын
He did that at the end
@robertasbell824 5 жыл бұрын
@@bigrone5153 I commented before I saw that part
@anthonygeary2626 5 жыл бұрын
The company I work for, dynatect gortrac made that hose and cable carrier (cat track) for your machine
@CamdenWallraff 5 жыл бұрын
Ah such a small world it is
@77Infidel 5 жыл бұрын
@1:40, "do what you can with what you've got." I said the same thing today to a family member who has come upon hard times. Thanks guys, can't wait to cut stuff up!
@Akkarsollum 5 жыл бұрын
My boys got that upgrade. We had 3-axis Flow Mach 2b (4020b). Don’t use flow nesting because it is ehh. Also the guy from Flow is named James, cool guy.
@tlangton 5 жыл бұрын
FlowNest is junk. I use Radan and export the nests as a dxf. Flowxpert cant handle top many parts, it gets bogged down. Your best off making a small nest and using FlowCut to create an array..
@Akkarsollum 5 жыл бұрын
Tony Langton I use multiple programs to nest for different situations. Majority of times I just end up using Inventor Nesting because it will automatically change the nesting(this only happens, if you made .ipt on inventor).
@williswhatchutalkinbout4367 4 жыл бұрын
8:30 what my toilet sees after a night of drinking beer.
@FireballTool 5 жыл бұрын
Sweet machine guys! Your going to love it. Great footage of the jet underwater. So cool! Jason
@crispyspa 5 жыл бұрын
5 axis... I can't wait to see the fun you guys have with this thing.
@brooksmatetich6830 5 жыл бұрын
This is the best waterjet unboxing video I've seen in a long time
@WaterjetChannel 5 жыл бұрын
How many have you seen?
@NickTrysAtLife 5 жыл бұрын
Nobody: Demons communicating under my bed: 9:04
@Lukelins1 5 жыл бұрын
Nick Murray wake me up my sleep paralysis demon is here.
@dylanwhitehead1057 5 жыл бұрын
hey, with that Hopper in place you can record 6 shows at once now!!
@Iris-uz9uf 5 жыл бұрын
i used to install for them. your comment gives me agita also, get the hopper 3, and you can record 18 at once pleb
@bclineman5250 5 жыл бұрын
Get out of here DIRECTV!!!!
@jerome6332 4 жыл бұрын
I don't know why but this was actually entertaining. God bless you all!
@christianmattew5304 5 жыл бұрын
That sound when the water hit the water was awesome
@TheSteveMeister 5 жыл бұрын
WaterJet unboxing video. Sponsored by IKEA. We supply the parts, and you put it together.
@maelgugi 5 жыл бұрын
Well, after looking the size of it, shipping it in pieces was the best idea they have.
@colinstu 5 жыл бұрын
needs an AvE "not to be operated by fuckwits" sticker.
@blackoak4978 5 жыл бұрын
No more videos... 😔
@colinstu 5 жыл бұрын
Ken Oakleaf what you talking about? He still posts.
@geroldgerold7319 5 жыл бұрын
Colin Stuart you’re dumb
@syafiqaiman3548 5 жыл бұрын
@@colinstu r/whoooooshhhh
@colinstu 5 жыл бұрын
@@syafiqaiman3548 WHAT IS THE FUCKIN JOKE HERE????
@kurtsullivan966 5 жыл бұрын
Love the underwater shots! I run a waterjet at work and have been told that a guy who worked there before me accidentally cut a hole in the bottom of the tank from dwelling too long... I can neither confirm or deny
@swissington8472 5 жыл бұрын
The thud when the jet hits the water!!
@spencerwells4523 5 жыл бұрын
You should go swimming in there😁
@dannyboots 5 жыл бұрын
It's a little pool for babies
@garrettSlingerland 5 жыл бұрын
You should break it in with another skateboard wheel video
@dimitar4y 5 жыл бұрын
They do risk the rubber smacking the waterjet and breaking it. 5 Axis and all that.
@swatkats54 5 жыл бұрын
Honestly the only channel for water jet excellence
@magicmantot7420 5 жыл бұрын
I work water jet and the difference between this new machine and the older machines is crazy. They got the newest mach and it’s way less bulky than the older ones and has way smaller components and everything is more compact and nice
@magicmantot7420 5 жыл бұрын
Not even to mention the 5 axis’s which would allow for cutting at almost a 90 degree angle
@magicmantot7420 5 жыл бұрын
I know a good bit about water jets, ask me anything
@WaterjetChannel 5 жыл бұрын
Hmmm... what’s your favorite color?
@magicmantot7420 5 жыл бұрын
Gotta go with orange
@seandepoppe6716 5 жыл бұрын
Did you find the skateboard wheel?
@jtcaseIey 5 жыл бұрын
Those mid sized waterjets go from 100,000 USD to 200,000 USD
@zzzzzz...9902 5 жыл бұрын
Okay, that is pretty cheap...can you buy me one quick and send it to Wisconsin. Thanks.
@xcvsdxvsx 5 жыл бұрын
Probably half off for the branding of having their logo constantly show up on THE water jet channel.
@iloveramen 5 жыл бұрын
thats not bad dang
@ryleynoyes 5 жыл бұрын
@Konr Ness large ones are 90,000 psi and dual bed
@plink4861 5 жыл бұрын
What would you even need the 90k for?
@kilo_kilo 4 жыл бұрын
My company is looking at getting 2-4 huge waterjets from Flow. This was more informative than 6 months of meetings and emails.
@Fruitypuncho 5 жыл бұрын
11:30 has to be the most satisfying moment ive seen ever
@dannyboots 5 жыл бұрын
Dio!
@andrewdobosz3682 5 жыл бұрын
Those underwater shots really made me want a can of seltzer
@cn-ml 5 жыл бұрын
* Licks waterjet * "Hopefully you guys enjoyed that"
@clouds7023 5 жыл бұрын
The clear water in the tank looks refreshing
@rockonmyfriend 5 жыл бұрын
I’m super psyched that y’all got a 5 axis waterjet. This is gonna be awesome.
@peterduplantier2702 5 жыл бұрын
waterjet your old waterjet with your new one!!!!!!!!!!!!
@dimitar4y 5 жыл бұрын
HAA
@JackboMack 5 жыл бұрын
Jason from Fireball tool mentioned if you leave it on in one spot long enough it’ll cut through the floor of the tank. But I think his was like 94k PSI or something crazy. And he may have been talking about with abrasive. Either way, I’m stoked to see what y’all cut!
@johnhess3967 5 жыл бұрын
Are you from the south
@SHorTStuF0888 5 жыл бұрын
@@johnhess3967 why? Because he said y'all? Is yinz better then?
@JackboMack 5 жыл бұрын
T.V. Man I was born in Maryland. But I’ve been in the army for the last 11 years. Everyone from all around the country says y’all for the most part.
@noname-ve7wo 5 жыл бұрын
This is the best waterjet unboxing i have ever seen.
@TwitchFast 5 жыл бұрын
Pouring the quartz into the hopper was beyond satisfying holy shit 11:29
@joshmvines 5 жыл бұрын
Stomach punchies! I need that sticker for my girl.
@SilverFox0784 5 жыл бұрын
Now you guys can do water jet vs water jet
@Tulwean 5 жыл бұрын
that makes the coolest sound when you first turn on the jet.
@jamesonhardy2126 5 жыл бұрын
The under water shot was so serene.
@jujujameson 5 жыл бұрын
I recently ordered a couple if knife blanks, so they were likely cut by this beast!
@thatguy9902 5 жыл бұрын
What does flow machines offer that other machines, such as OMAX, don't offer?
@dimitar4y 5 жыл бұрын
nothin', it's the same shit. duh. Science is only 1.
@thatguy9902 5 жыл бұрын
@@dimitar4y not sure you understood what I was asking... But thanks for responding....
@DustyEggSauce 5 жыл бұрын
Honestly. Congrats on the upgrade guys, your company must be doing good !
@ryanturner9778 5 жыл бұрын
that vortex around the watermelon was cool
@ronin_user 5 жыл бұрын
You should make a 4,000 bar espresso.
@homebodyhero4602 5 жыл бұрын
This wasn't out of jealousy from another waterjet channel was it?
@dnbadamwalker 5 жыл бұрын
The waters soooooo clean 🤯
@JohnSmith-ii3cu Жыл бұрын
Lol, James is like "Do what you want, I get paid by the hour." 🤣
@willhe86 5 жыл бұрын
what does something like that cost?
@yankee2093 5 жыл бұрын
Will Lawrence 100k-200k
@willhe86 5 жыл бұрын
@@yankee2093 really? I was thinking a little more but I guess that sounds about right.
@cinges 5 жыл бұрын
what was the price all of that?
@ElfRightsActivist 5 жыл бұрын
too fuckin much, bud
@adam-bc6tl 5 жыл бұрын
Probably at least 150k
@Joshua79C 5 жыл бұрын
Not hard to find Purchase prices online, but installation costs is another matter.
@justinbrennan8136 5 жыл бұрын
Use the same Toyota forklift at my work
@DevilMann454 5 жыл бұрын
Awesome! 5 axis! Happy for y'all
@WaterjetChannel 5 жыл бұрын
Can’t wait to test out the 4th and 5th dimensions.
@WhiteRescuer 5 жыл бұрын
16 watermelons disliked this video.
@DarkMaster3960 5 жыл бұрын
That's one hell of an unboxing
@mortenpettersen5233 5 жыл бұрын
It's amazing to see the water being so clean
@doodskie999 5 жыл бұрын
So can u waterjet your old waterjet with the new one?
@jerediah6589 Жыл бұрын
7:16 that synced laughing 🤣
@dojahmastah7156 5 жыл бұрын
Nice now time for a water jet competition with fireball tools!
@ryanmarshall8925 5 жыл бұрын
Best water jet unboxing I've seen yet
@blackoak4978 5 жыл бұрын
Recently had two trucks take a prefab building out of the shop's bay door. They couldn't even see each other, and it probably weighed twice what the whole waterjet weighs... amazing how quickly one can get jaded to difficult lifts, lol
@turbochevelle5641 5 жыл бұрын
I hope you guys have better luck with the new flow than many of the people I know have had. Personally I will never buy another Flow after helping friends maintain and repair theirs.
@siphontheprotogen5170 5 жыл бұрын
This is so cool on how they got a new water jet it looks amazing and I like seeing the tank with clean water for the first time
@anthonym9626 5 жыл бұрын
Can you do a really complex cut that shows the benefits of a 5 channel head?
@DeltaMusicTV1 4 жыл бұрын
I remember learning about these machines in Orange County Choppers, back in the day. I´m from germany so it was running on a different TV station here but I still remeber how they work, what they cost and what they can do. It was fun to see, that someone ordered one and youtube recommended that;D
@TEXASDEADMAN 5 жыл бұрын
This has to be the happiest day of my LIFE!
@onehitwarrior1708 5 жыл бұрын
This has to be one of yalls coolest videos
@tjommidagg3296 5 жыл бұрын
Can't wait and see what you will do next time you get a new waterjet.
@DurzoBlunts 5 жыл бұрын
Best effect from the jet all yet. Amazing.
@hotrodZack1948 5 жыл бұрын
That brake press is a beast😵
@johnpossum556 5 жыл бұрын
That watermelon had a great jacuzzi experience.
@w34356 5 жыл бұрын
Congrats on the new tool!!
@jackmurphy2109 5 жыл бұрын
Can you please add a purchase link or website. My school needs one of these!
Дима Масленников
Рет қаралды 5 МЛН
Waterjet Channel
Рет қаралды 867 М.
Robinson Foundry
Рет қаралды 1,1 МЛН