#newtype

Рет қаралды 54,572

Күн бұрын

Speed Build of the "PG RX-78-2 GUNDAM UNLEASHED PART: 1" (with custom L.E.D Lights) from Bandai . As always thank you all so much for your patient :3
Looking to forward seeing more videos?!
Stay tuned and be sure to subscribe:3
To help me out, make sure you enable your subscription notifications on KZfaq! You can do that by going to one of our videos and clicking on the grey bell, located near the button that says your "subscribed". That will ensure that you'll see all new videos.
EVAN DESIGN L.E.D. : www.modeltrainsoftware.com/
Background Music: ⏱️TIMESTAMPS⏱️
0:00 INTRO THEME: ES_Interplanetary Material - Duke Herrington
10:13 ES_vanity - dreem
12:54 ES_vanity - dreem
16:21 ES_The Sinner - Sum Wave
20:54 ES_Beach Memories - Sum Wave
24:48 ES_Afrodeziac - Far Orange
epidemicsound : www.epidemicsound.com/
Artlist: artlist.io/
MODEL KIT:
NewTypeHQ: newtypehq.com/
AS ALWAYS THANK YOU FOR SWING BY

Пікірлер: 57

@OtakuBuilder 3 жыл бұрын

Yo what's going on my dudes and dudettes! Just a friendly reminder that this going to be part 1 for the perfect grade Unleashed Gundam and part 2 will be premiering at the same time tomorrow. Once again thank you guys so much for your patience and thank you guys so much for your continuing support🦊💙💙👍🏽

@Technicallyaddicted 3 жыл бұрын

As always I'm going to use your videos as tutorials. You are hands down the best gunpla builder on YT

@jordandadleh3656 3 жыл бұрын

is there a reason you did two different colored LED's for the knee section?

@Technicallyaddicted 3 жыл бұрын

@@jordandadleh3656 the entire right side has green stickers and the left has red. These are like airplane indicator lights. That's why they're different. It's intentional by bandai.

@jordandadleh3656 3 жыл бұрын

@@Technicallyaddicted thanks for the explanation appreciate it

@OtakuBuilder 3 жыл бұрын

@@jordandadleh3656 yes because 3d stickers actually have one green and one red on top of that the one to 1 scale Gundam that's in Japan has the exact same LED setup

@Technicallyaddicted 3 жыл бұрын

You should do a video series of airbrush tutorials. Your painting skills are legendary, and I wish I was half as good as you.

@jhermaineharris2142 2 жыл бұрын

I’m buying this kit in two days. Might be broke afterwards but I don’t care. I just wish they revised the ole G of Gundams. Domon’s shining Gundam and then also another God Gundam. My favorite Gundam series and I don’t care who doesn’t like it. I do. Lol.

@pepandeita9366 3 жыл бұрын

Man, you’re nailing it, I really dig watching your build bro! ✊🏼😎

@AchillesTheZero1 3 жыл бұрын

Awesome work as always dude, been waiting for this one!

@Reddog08 3 жыл бұрын

Your builds are on point. Love it. Great job

@davidtan2206 3 жыл бұрын

Love your reviews and builds! Keep up the good work

@onielsotakuforge5064 3 жыл бұрын

This PG kit is incredible! 🤖 I would love to custom build this grand daddy Gundam. The metal engraving parts that came included with this kit surprised me dude!

@solvix1432 2 жыл бұрын

This makes me happy :)

@wizard211111 3 жыл бұрын

Amazing, wow! Your job is awesome!

@Konuvis 3 жыл бұрын

Totally jamming to this build!

@joelpetersen2480 2 жыл бұрын

One day i will gonna own this kit.

@Dracobyte Жыл бұрын

Nice build!

@inkedgunpla2768 3 жыл бұрын

Masterpiece as always bro

@jasonck9635 2 жыл бұрын

The work you do is awesome , I really want this kit also , just a bit expensive , but of all kits I’ve seen , this is the one I want the most !

@Gunpla_Uruguay 3 жыл бұрын

great work with the color separation :D

@muhammadmustafaahmad6794 3 жыл бұрын

i love how most youtuber would just rush build this model once they got it but this guy took 2 whole weeks to make this awesome video for us.

@Rene17642 3 жыл бұрын

i love your work man :D i love how you dont change the original color scheme of every kit you build

@chefspawn617 3 жыл бұрын

Can't wait to see your vision of this kit!

@sxintaadg8101 3 жыл бұрын

this kit is everything i thought it would be, one day i will own one lol

@xxnike0629xx 3 жыл бұрын

Wow! As expected... Super impressive work!

@rx-93nugundam20 3 жыл бұрын

@xxnike629xx It will also be impressive if you go back in building your kits again 👍 PS Double impressive if you also share your thoughts about HGUC Xi Gundam being *NOT* a P-Bandai huehuehue

@Evilducky200 3 жыл бұрын

Look at you painting the inner frame. I plan on just painting the armor pieces. Give it that - standard and custom touch. Im stoked to do it. Spring cannot come soon enough!

@kadesoutherland3648 3 жыл бұрын

waa ha ha ha ho! oooooooooooooooooooooooooooooooo shiney!!!!

@bryanthevery 3 жыл бұрын

Absolutely phenomenal. Keep up the amazing work. You've been a huge inspiration and a great learning tool! I didn't happen to see but what was the glue used for those Evan LED's?

@LotiMcfloti 2 жыл бұрын

2:48 my heart and soul just got yanked out after seeing that rip. Oof.

@Gunpla_Uruguay 3 жыл бұрын

can´t wait to get mine, but for that i´ll need to wait until we can travel to japan again :(

@phat_gunpla_etc 3 жыл бұрын

i'm still waiting for my dec preorder! so i know man!

@BlazenMikay 3 жыл бұрын

Yea..... pg unleashed unicorn would be interesting while thinking about it

@ascensionindustries9631 3 жыл бұрын

I've got two different sets of RG water slide decals saved on eBay for this kit as well as fiber optic cables to amp up the lighting effects on the backpack. Can't wait to get this kit, but Bandai could have done a little better for the price.

@filip8985 3 жыл бұрын

I dont think i ever had a chance of getting my hands on this kit, maybe if they do a 3rd or 4th run of it ill have a chance, though its still $500 aud, thats more than the exia with the lighting kit

@greatwhitekong 4 ай бұрын

maybe in another thirty years we'll get a Char Zaku II PGU kit 😥

@xuanqili184 3 жыл бұрын

The kit is amazing, the LED absolutely sucks... Bandai's LED is always meh, even with the unicorns... just one time, I wish they can add actual LED sets in their kit like what Mechanicore is doing.

@specialorder9379 2 жыл бұрын

I just preordered this kit. I’m SUPER excited!!! But oh man am I intimidated about it! Where did you get the water slide set for this kit? Thanks in advance!

@chriskruining 3 жыл бұрын

Hi @otaku builder, can you perhaps give me a link to where I can find the waterslide decals, I really wanna up my building game with this model, so I'm looking for a reliable source :D

@Tanner_Video 7 ай бұрын

I know this is an old video...but do you have any resources on setting up LEDs for this kit? I want to give it a go in 2024 lol.

@jhermaineharris2142 2 жыл бұрын

Also do they have a led mod that makes the led better for this PG???

@andreapallotti3237 3 жыл бұрын

Hi, first of all I congratulate you on how you managed to modify the RX-78-2 Unleashed. I really liked the colors you gave the Gundam. Could you tell me with these colors which internal parts you have colored? Dark Aluminum ??? Steel ??? Titanium Silver ??? Burnt Iron ???

@gesie0504 3 жыл бұрын

I hope Bandai still keeps the Prepose at Posable Hands in PG KITS.

@ilikegiantrobots1775 2 жыл бұрын

That’s cool and all, but how did you get your Master Grade 3.0 to look that way???

@drewpickard554 3 жыл бұрын

Great video! FYI your discount code isn't working on new type

@simondoyle7169 3 жыл бұрын

would be dope if they implemented the core fighter into the model. My wallet would have a heart attack 😭

@andrewgrinter 2 жыл бұрын

Pretty sure the core fighter model fits into the chest piece.

@leonardode-pinchy3234 3 жыл бұрын

Dude I preordered mine in November and am still waiting for it, don’t be complaining how long it took to get here just be happy that you got it

@inkf2846 3 жыл бұрын

Think the hands don’t move cause if they did the ball joint would frick up the chrome paint.

@luciobartlertt8273 3 жыл бұрын

Do you do costum build orders

@UpUpDnDnLtRtLtRtBAStart Жыл бұрын

*sighs* i don't need another hobby right now or at least my wallet doesnt want me to have another one. Can I ask - what type of spray painting tools are those and how can I learn more about painting models? I will be purchasing a perfect grade at some point and want to prep.