No video

Lexus IS250 car stereo budget build sub and amp install! Sundown LCS-12's

  Рет қаралды 69,555

NextLevelCarAudio

NextLevelCarAudio

Күн бұрын

In this video I install an aftermarket amplifier and 2 12” sundown audio LCS 12's subwoofer’s with a skar audio RP-800 amplifier in my wife’s Lexus IS250 In an extreme budget build. Was trying to get the most bang possible for under $500. Mission accomplished. Kept it @ $450 for the build! may also be applicable to the IS350 and other Lexus vehicles but not verified.
Thanks for watching! please like, subscribe and turn on those notifications!

Пікірлер: 435
@Aphraidknot
@Aphraidknot 3 жыл бұрын
Thank you for finally pointing out the actual connectors rather than all the forums stating "Hook up to green and brown wires"... There are fifteen green wires lol! Hooked up Kicker Hs10 with speaker sense and works fine... IS350, Navi, Non ML.
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Thanks for the feedback
@randyrawdingii5135
@randyrawdingii5135 7 ай бұрын
Yessss
@derrellwilliams2810
@derrellwilliams2810 4 жыл бұрын
Bless you for this video. Finding info on audio systems for this car is a pain in the ass.
@anthonyt2796
@anthonyt2796 4 жыл бұрын
Not wrong. Full wiring diagram for 2009/2010 ML system is here, but appears to be likely same for Non ML as well: www.clublexus.com/forums/is-f-2008-2014/942642-2010-mark-levinson-wiring-pin-outs-for-line-out-converter.html
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Thank you!
@chaseallsup10
@chaseallsup10 4 жыл бұрын
Dude, running a remote wire and the LOC from the factory amp is genius! Saves so much time! Thanks man!
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Glad it helped! Thanks
@salgarcia6480
@salgarcia6480 4 жыл бұрын
NextLevelHummer whats your cell
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
If you have any questions, start a new comment thread and I’ll be happy to help :)
@chprod4303
@chprod4303 2 жыл бұрын
You can buy an LOC that comes with a blue wire for remote power.
@chrisduncan501
@chrisduncan501 Ай бұрын
Def genius
@dougtond1380
@dougtond1380 2 жыл бұрын
absolutely beautiful, man. I really appreciate seeing "entry level" equipment getting proper love and people install. Seems like every kid nowadays needs the hugest, most inefficient drivers, etc This is really cool and looks like it sounds great
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
Thanks, much appreciated
@anthonykindle9377
@anthonykindle9377 11 ай бұрын
​@NextLevelCarAudio hey, so where did you run the wire from the battery?
@SoVividTV
@SoVividTV 3 жыл бұрын
Just installed my sub and couldn't have been any easier thanks to your video. Running a single 10 inch Skar DS2 with their 800 watt amp and custom box. It hits super hard!!! Probably spent around 300 or less! Super happy to be bumpin again. I come from the photobucket supported forum days and with most pictures removed from all the once helpful threads, your video was a huge help with my IS.
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Awesome man! Thanks for the feedback
@dnthateme559
@dnthateme559 3 жыл бұрын
Bro that young jeezy album was meant to be heard with a nice car system installed in the whip. Good choice for the demo track lol
@frenetikgamer44
@frenetikgamer44 4 жыл бұрын
you need to do a video but about the regular speakers... how to change oem amp to aftermarket with same cable harness
@CharlieeBoi
@CharlieeBoi 11 ай бұрын
Man that’s what I’m saying
@russellkenderdine435
@russellkenderdine435 10 ай бұрын
My amp OEM amp got flooded in the back. Trying to figure out how to just bypass the OEM amp
@druduns1
@druduns1 10 ай бұрын
Currently building my is250 build but I got a android Tesla head unit has rca putting in 5 channel recoil amp already have sky high 6.5 and super tweeters in the 2.75 spot running new speaker wire with 2 - 10’s seismic audio custom box will see how it turns out, 1/0 gauge ofc too
@antonioherrera2476
@antonioherrera2476 3 жыл бұрын
Thank you for this video. This method works for the Non-Navi system is250s as well.
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Thank you for the feedback! much appreciated!
@sydsnott5042
@sydsnott5042 3 жыл бұрын
Excellent video young man. You know what you're doing. You remind me of what I was doing in the 80's car hifi wise. Excellent of you to actually do a sub install on the 2nd gen is250 and especially letting us know which wires do what. Good onya m8 👍👍👍
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Thanks!
@gotshmoked1764
@gotshmoked1764 8 ай бұрын
hey @sydsnott5042 what is your opinion if i may ask about a sedan build with no folding seats that has the frame of the vehicle goin into the back seat and trunk? is it still worth having aftermarket subs back there. i do have a “ski hole” like the one in this video.
@tonydize3944
@tonydize3944 3 ай бұрын
We miss your videos man you but you continue to help a lot of us bass heads out here thanks
@droneon6419
@droneon6419 2 жыл бұрын
This video is so simple, yet so in depth! Thank you so much!!
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
You bet :)
@lSUlCHl
@lSUlCHl 6 ай бұрын
Amazing video, definitely the best audio install video i've ever seen, thank you for the tutorial!
@superior3384
@superior3384 4 жыл бұрын
I did my wife's truck with the same amp skar 800 and 2 DC level 1 10 inch subs. Sounds great. You did a good job . Looks really nice
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Thanks!
@deedubz6331
@deedubz6331 3 ай бұрын
Great video for learning . Sent to my son so he could understand his install better
@kyranliburd9997
@kyranliburd9997 4 жыл бұрын
i have the same exact car and i just wanted to get a better Audio sound for a Good budget ! Man i just stumbled on to your video this is exactly what i needed !! Much thankss
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Kyran Liburd awesome! Only thing I really did not show was running the power wire from front to rear. That’s pretty simple but right in some spots. Ground wire can attach anywhere in trunk area that you can sand down to bare metal. Have fun with your project!
@david029014
@david029014 8 ай бұрын
That monster system is amazing!
@SoVividTV
@SoVividTV 3 жыл бұрын
BRO!!!!! This video is everything I need and more. I have the same car and I have been itching to add some more bass. The way you looped the RCA's in was gravy!! Also, that other set up in the Hummer is fucken nuts man great stuff!! #BringBackBass
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Thanks for the feedback bro. Glad the video helped!
@SoVividTV
@SoVividTV 3 жыл бұрын
Quick question bro, are you able to control the bass through the touchscreen as you normally would with the stock sub?
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Yes sir, you can adjust the bass on the touch screen to your taste. Just like the OEM.
@chrisduncan501
@chrisduncan501 Ай бұрын
Thanks bro u got straight to the point and greatt!!! Detail
@jaybo_carphotos
@jaybo_carphotos Жыл бұрын
Thank you for the sub wire info! Saved me a ton of time!
@christophervtec762
@christophervtec762 4 жыл бұрын
Love that flush mount box ! I myself have the Rp1500.1 with 2 D4 12s in the skar encloser tuned at 32hz. I have the subs facing the back seat with them down it definitely gets windy! I also have an alpine for the highs fsx65s in the doors 4 VX35 tweeters , m69c massive audio in the back deck plus sound deadener in the trunk lid, quarter panel & doors great but cheap stuff! Sound quality isn't in the price!
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Christopher Vtec awesome man! Sounds like you got a nice setup there. I probably would have fired my subs into the cabin, but my rear seats don’t fold down. I’m happy with it tho. Thanks for watching!
@timcockrell497
@timcockrell497 11 ай бұрын
This has got to be the best video I've seen yet you should work for lexis you could teach them something thanks
@richardmontoya3449
@richardmontoya3449 3 жыл бұрын
My 2007 was a pink wire for the remote off the factor amp
@Chitown388
@Chitown388 3 жыл бұрын
a very helpful video. Thanks! Wondering why you even need to connect the remote turn-on cable; the mono amp supposed to turn on when it detects a signal from the factory speaker wires and automatically turn off when there is no more signal (i.e. when the head unit is shut down)
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Thanks for feedback. My amp does not do that tho
@johnsteger
@johnsteger 3 жыл бұрын
I love my is250 I got 2 8w7's in a 4th order and hybrid audio and zapco amps with a 16 channel dsp
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Dang, that’s awesome!
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
You got a video link?
@icons1161
@icons1161 3 ай бұрын
This helped me put a lot! Thank you got everything set (im pretty sure each model has a different amp cause i had the use the mythic orange wire lol)
@pospc2
@pospc2 3 жыл бұрын
Just wanted to come back and let you know. Aftermarket headunit installs on the Lexus was much more difficult than I would have liked. You got to gut the main board out of the stock head unit, build a case for it, plug it all back in and tuck it away. Install your new headunit where the old cd player was, I then ran 4 channels of RCA wires and 1 speaker level to the back where the stock amp was. Removed the stock amp completely, mad mounting brackets for a small 5 channel amp, wired up the door speakers in front and rear, Didn't use the center speaker(never liked it) or the stock sub. Installed 2 10 inch subwoofers in the trunk. So pretty much I am using none of the stock audio wires but had to gut the headunit so I could keep the hvac working otherwise without the factory headunit plugged in I didn't have mpg,fan, heat,ac. If I had to do it all over again I honestly don't think I would. I would likely just do it the way you did. I still need to 3d print some trim to make the install look finished. I would rather do aftermarket audio install in my infiniti 10 times over before doing it in the Lexus again
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
WOW!!!... you a better man than me bro! Lol. That’s crazy. Thanks for the feedback tho. Appreciate it
@alextroxell5506
@alextroxell5506 3 жыл бұрын
Can you make a quick list of all the parts you used?
@itsehhd1382
@itsehhd1382 Ай бұрын
Thank GOD for playing Thug Motivation 😭
@richardhernandez4372
@richardhernandez4372 Жыл бұрын
Sounds hella good i do think you shoulda have removed the top deck factory sub so when the arm rest is closed it acts as a port from the trunk and gives a lil deeper bass
@NextLevelCarAudio
@NextLevelCarAudio Жыл бұрын
Sounded perfectly good enough for me. People can totally remove it if they wish.
@BeatWithBass44
@BeatWithBass44 4 жыл бұрын
I came from a Alphard audio 5500 on 2 Dc xl 18s. Now i have a 2011 is350 running 2 sundown sa 10s in a 4th order on a skar sk1500
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Heck yeah man! if your from the PNW let me know, id like to hear it! keep poundin'
@Earache.
@Earache. 4 жыл бұрын
Inspiring me rn man
@CamCadie
@CamCadie 4 жыл бұрын
bouta put in work with my Stimulus Build on my isF too! You made me want to get a Zv5
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Henry Nguyen them ZV5’s no joke man. Search sound you tube. They the bomb. Good luck with your build man!
@gabrielwalker1318
@gabrielwalker1318 3 ай бұрын
Great video 👍🏼banging on a budget 😊 I love it,
@nathan22ortega
@nathan22ortega 4 жыл бұрын
I love this video thank you for sharing, I would like to buy the same subwoofer box you have for my 2005 is350 Lexus
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Sorry man, your message was in spam so i am answering it delayed. You can find the box on ebay for like $150-200. very well made!!!! and i usually HATE prefab boxes. But fits like a glove
@diydozier3205
@diydozier3205 7 ай бұрын
Why pull the sun from the rear deck if your just unplugging it at the amp? No need even pulling the seat in that case or the rear deck.
@damon323
@damon323 9 ай бұрын
Great video Bro! So was the factory sub not being used anymore from seeing your wiring? Is that not an option to keep it and still pull a signal from it? Also, I noticed the polarity was reversed when you verified your remote signal…that ended up being all good?
@jacekkaminski5698
@jacekkaminski5698 2 жыл бұрын
This is sick. Have you just tried to improve Mark Levinson ? Probably one of the best set-ups in car audio...
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
I have not. But yeah, they do sound decent
@Danielc.22
@Danielc.22 4 жыл бұрын
Nice build🔥🔥👌🏻👌🏻 but it would sound much better if you have the subs 2-3 inches away from the trunk . My friend has the same subs in a Honda Civic with a ported enclosure and his hits hard
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
xDDTG {911X}ツ I totally agree.... but the purpose of this car is a grocery getter for the wife. So need the trunk space. Give it time, and eventually I’ll be slipping in the 15” nightshades. Need to get her eased in first with some starter bass :P
@Danielc.22
@Danielc.22 4 жыл бұрын
NextLevelHummer I love the system in your hummer and oh I see 🔥👀
@AHLive215
@AHLive215 3 жыл бұрын
my factory amp in my is250 Is bad. Can i bypass the amp?
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
You can, but need to figure out what wires are the speaker inputs going into the amp. And utilize those. Unfortunately, that information I do not know :/ sorry
@killjoyclown
@killjoyclown 3 ай бұрын
Will the stock sub still work after doing this
@jaredlindsay5690
@jaredlindsay5690 10 ай бұрын
I have an 09 is 250 and I have everything wired the way you showed in the video, cut wires to crimp on the high/low converter and connected all the right wires. Only difference is that I wired my remote through a switch and then to my cigarette lighter for power to have to option to shut off the aftermarket amp and sub. When the sub/amp is turned off, everything is normal with the sound system, but like 5-10 seconds after the amp powers on I lose audio from all speakers in the car. When I turn the amp back off I get sound from the other speakers again after Bluetooth reconnects from my FM transmitter. Was wondering if you had any idea as to what could be causing this. I did also tape off the wires going to the factory sub separately so nothing would short out. Everything checks out with multimeter except I don’t seem to be getting signal coming through the LOC to go to the amp. Not sure as to why. Thanks for reading
@joshuadelahoz3236
@joshuadelahoz3236 2 жыл бұрын
thx man, this video made it super easy!
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
Awesome!
@ElChinoPesado
@ElChinoPesado Жыл бұрын
Yo bro awesome video , but quick question do I have to remove the factory subwoofer? Or can I leave it since I’ll be splicing up in the trunk .
@psementalist
@psementalist 4 жыл бұрын
Nicely well done build up very impressive build up hits hard pound's great to
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
PSE Mentalist thanks bro!
@armandolopezmendoza3836
@armandolopezmendoza3836 6 ай бұрын
Hello Sir, I have a 2009 Lexus ES350, but I’m not sure which wire harness I need to use from the Factory Amplifier located in the trunk right side. I’m trying to connect a “Line Output Converter Adjustable Amplifier”. Thank you.
@isaacmorantes38
@isaacmorantes38 4 ай бұрын
So do i have to remove the factory sub in order for it to work, or can i just tap into the factory amp and do it that way?
@Skalper740
@Skalper740 3 жыл бұрын
This is Mark Levinson sound system? I want to try this instruction, but in my IS220 mark levinson system...
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
No, not the Livingston system. Not sure if it’s the same wires for it...
@tyreemcgrone10
@tyreemcgrone10 2 жыл бұрын
Thank you very much for this video! I know I'm a year late, but I was thinking about running 2 sundown E 15s, a wavtech LOC, and a trauma audio 1000D. Do you think that is overkill for a lexus ls460 L ??? Thank you.
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
In don’t think so. Check out the newest videos of my Hummer build. Some think I’m crazy lol
@r3ctalp1zza
@r3ctalp1zza Жыл бұрын
What information can you provide in replacing the head unit to something more modern since it controls HVAC? I’ve seen some custom installs that have a second unit underneath, replacing ONLY the CD player.
@fn..5778
@fn..5778 2 жыл бұрын
Thanks for helping me out
@dragongogo9
@dragongogo9 2 жыл бұрын
thank you so much for this video, you're going to save me a lot of time. i have 1 question tho PLEASE, do i have to do the steps in 2:40? cant i just do what you did in 4:38 and skip the whole removing seats?
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
If you don’t want to remove the factory sub, no need to remove seats/rear deck
@lonniebeams8499
@lonniebeams8499 Жыл бұрын
My converter has a pair of left wires, a pair of right, but it also has a pair of grounds that I’m not sure what to do with. It’s a truconnex am I still able to use it?
@NextLevelCarAudio
@NextLevelCarAudio Жыл бұрын
Yep. Just use 1 channel. Left or right. Usually you don’t need to ground it unless your getting noise on the channel.
@lonniebeams8499
@lonniebeams8499 Жыл бұрын
@@NextLevelCarAudio I did like you expect I’m having a hard time finding a remote wire on the factory amp. My d connector is different and im waiting to get my hands on a voltmeter. Right now the volume on my radio isn’t working
@NextLevelCarAudio
@NextLevelCarAudio Жыл бұрын
Shoot. Sorry to hear that. Yeah. A good DMM will help
@lonniebeams8499
@lonniebeams8499 Жыл бұрын
I ended up cutting the plug off the factory sub and wiring the loc to the 4 wires. My bass knob has 2 sets of rca as well how should I run these. I can’t seem to figure it out
@NextLevelCarAudio
@NextLevelCarAudio Жыл бұрын
One set is input the other set is output. Input comes from head unit. Output goes to amp RCA’s
@wallaceblake24
@wallaceblake24 3 жыл бұрын
This is awesome! Would the wiring be the same for a 2014 is250 fsprt? I’d love to do something like this
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
I’m not sure buddy.... different body style so they may have changed some things up.
@socalsfinestcoc4727
@socalsfinestcoc4727 8 ай бұрын
Do you have to unplug the factory sub? Or am I able to bypass having to do that and remove the back seats and all that?
@juliosoler4729
@juliosoler4729 2 жыл бұрын
I want to bypass my stock amp and connect my door speakers to a new amp, but have no idea where to start or how to do it ( on a budget ) lol Also in the amp in the rear do you know where i could find a color code diagram for the speakers ? Thanks and great video ! Very helpful 👌🏽
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
Pull the door speakers to verify wire colors, then match them up back at the factory amp. Use 9v battery test to ensure you got the right wires and polarity. Done
@brandonjohnson131
@brandonjohnson131 Жыл бұрын
Great video! I just ran across this while looking to upgrade the sub in my own IS. Question, who made the box? It looks to be about 2 cubic ' internal? Thanks in advance!
@NextLevelCarAudio
@NextLevelCarAudio Жыл бұрын
Yeah, I actually snagged it on eBay. Was a prefab. Couple people tried finding but no longer an item for sale :(
@dinodejoras974
@dinodejoras974 Жыл бұрын
I have a question bro i just saw this video😁 so i got my subs put in, i went to my audio shop and he didnt disconnect the factory subwoofer i guess he just tap into the factory amp, is there any way that i can disconnect that by not taking off the whole back seat? Like popped the panel/ cover of the stock sub? Thank you
@jaysonoliveira4752
@jaysonoliveira4752 4 жыл бұрын
So your only power wire going to 800rms amp is that tiny white wire?????? I have a 2014 es350 ML....i want to install my jls. I like the idea of using the white wire for the remote wire, and also tapping into the factory amp for the loc.
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
No sir.... I did not show the power/ground wire install. Sorry! I have a fused 0awg power wire and 0awg ground wire running to the amp. at 9:05 min into the video you can see the blue and red power ground wires ran into the amp.
@connorjohnson8032
@connorjohnson8032 4 жыл бұрын
Are all the wires on the plugs the same on a non Mark levinston system without navigation?
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Connor Johnson I wish I could tell you, but not sure. Sorry!
@connorjohnson8032
@connorjohnson8032 4 жыл бұрын
NextLevelHummer not a problem thanks for the awesome video
@eugene9941
@eugene9941 3 жыл бұрын
Clean build bro.
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Thanks!
@davidrawrigue5548
@davidrawrigue5548 Жыл бұрын
i know this is 3 years ago but do you happen to have a link or remember where you got your box made?
@vino6018
@vino6018 4 жыл бұрын
Hey man where do I get the speakers and box. I have ah Lexus IS 250 2008. I want my system like your. Can you tell me everything to get. Please answer me. Thank u for your time
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Speakers and amp from down4sound.com free shipping and no tax. Best prices. The sub enclosure I got from eBay. Just search Lexus is250 subwoofer enclosure. You’ll see them. And finally the LOC to convert your speaker wires into an amp RCA signal. Search LOC on amazon and buy any one you prefer. They are cheap. Then obviously you need an amp wiring kit. You can also find them @ down4sound.com if you want quality. Be careful of the cheap ones on amazon/eBay. I never skimp on my electrical/wiring. Hope that helped.
@anthonyg3016
@anthonyg3016 2 жыл бұрын
Just discovered your Chanel. Love your videos man. You don't mind putting the link for a the stuff used here on this video . So I can buy em
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
They don’t make the box anymore, got that on eBay I tried getting a link for someone but could not find it. Everything else I got from D4S!
@dirtkingx
@dirtkingx 4 ай бұрын
for some reason im not able to get any sound or base ..pls help
@free5370
@free5370 4 жыл бұрын
Hell yeah man I appreciate this video so much! I was wondering why you didn’t tap into the wires to keep the stock sub also plugged in? I’m trying it that way but it’s proving to be a pain in the ass
@free5370
@free5370 4 жыл бұрын
Also I saw your in Lacey, I live in Bellingham, not too far off 🤙
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
awesome!
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
I did it that way because I ended up removing the stock sub to create a nice size open passage to the trunk which did make the bass louder and less muffled sounding.
@LilWade42069
@LilWade42069 4 жыл бұрын
@@NextLevelCarAudio hey i just got my 09 is250 about a month ago, and just came across your video/channel and am in the middle of my own amp/sub installation. Im going to be tapping into the sub wires as well. but i was wondering if i like t-tap style into them but instead of t-taping, actually solder the wires and still have my stock sub work as well as my after markets? id like to keep the stock hooked up, in case i choose to sell the car.. or just want to have my aftermarkets off for a quiet ride... Also where did you run your power wire through the firewall? in the stock grommet behind the battery?? thats where i fished mine through anyways thanks in advanced!!! P.S love the video and great build...looking at getting a box like yours but im up here in Canada and having a hard time finding one and the ones from the states are as much as the box for shipping!
@LilWade42069
@LilWade42069 4 жыл бұрын
@F-b Owen did you you end up getting tapped to the stock sub wires and still having both your aftermarket and stock sub working???? i have a 09 is250 and as we speak at this step ha!
@richardmontoya3449
@richardmontoya3449 3 жыл бұрын
I have a question. Why didn’t you leave the factory sub connected as well? Does it not have enough signal after you tap into the wires?
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
You could have left it.... but with the two 12’s in the truck it completely washes out the factory sub and don’t even hear it. I also tried leaving it, and bass was a tad louder with it removed. Like a passage for the bass so to speak. Armrest is blocked off by the enclosure, so opening and closing that does nothing.
@richardmontoya3449
@richardmontoya3449 3 жыл бұрын
@@NextLevelCarAudio thanks also where did you ground your amp?
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Sorry for late reply, where the factory amp is grounded at. I grinded down to bare metal and attached there.
@luisarreola2362
@luisarreola2362 10 ай бұрын
Do I need to do the wiring to factory subwoofer?? I’m trying to avoid that part lol
@calebw9342
@calebw9342 4 жыл бұрын
So if I was going to use the same set up for the lexus would I need that big of power wire?
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
DankMatter yes, I did not show in video, but you would need to run a fused power wire from battery to the trunk. Then a ground wire to amp which you can tap from somewhere in trunk area
@bassbrother101
@bassbrother101 4 жыл бұрын
Awesome 🙂👍 thats a nice box too
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
bass brothers thanks. Appreciate it!
@stxtikgio2603
@stxtikgio2603 Жыл бұрын
Nice video super simple
@Vq.dylan661
@Vq.dylan661 3 жыл бұрын
Can you keep the factory sub installed? I really don’t wanna take my seats out and such haha
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Absolutely! Won’t hurt a thing. I took mines out and made the bass a bit louder.
@user-jw9og2zp3j
@user-jw9og2zp3j Жыл бұрын
It’s probably mentioned, What year is your is250?
@dillonadams7883
@dillonadams7883 4 жыл бұрын
Tapped into the white wire as you said. didnt turn on the amp. any suggestions?
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Sorry man, your message was in spam so i am answering it delayed. How is your power and ground? if you got a loose ground that could be the problem. also, if your car does not have factory navigation or if it has the upgraded "premium" factory stereo option, this wire may not work. let me know if you get this figured out. thanks!
@axlmcintosh6148
@axlmcintosh6148 3 жыл бұрын
Once the wires are tapped in, do you reconnect them into the factory amplifier or are they left unplugged? Apologies if that is a dumb question. Thanks in advance!
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Once you tap into them, disconnect them from the factory amp. Otherwise you are going to get a messed up signal
@louididdy
@louididdy 3 жыл бұрын
Great video. Thoughts on adding dynamat to the trunk to help with rattle?
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Absolutely, definitely helps.
@RyanBassForLife
@RyanBassForLife 4 жыл бұрын
Nice budget setup
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Thanks man
@RyanBassForLife
@RyanBassForLife 4 жыл бұрын
@@NextLevelCarAudio you bet
@skiddychief1622
@skiddychief1622 Жыл бұрын
Hay man o just had a question so I’m hooking up a sub with a LC2i how would I wire that
@Othawize721
@Othawize721 2 жыл бұрын
Ty for this video
@noahstevenson8690
@noahstevenson8690 4 жыл бұрын
do you have to go behind the seat and undo that dvc sub? or can I skip that step and install my kickers?
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
If you are going to tap into those wires for the signal, i definitely would. At the least, you can cut the OEM subwoofer wires at the amp. That way you don't have to pull the seat off to disconnect the plug.
@noahstevenson8690
@noahstevenson8690 4 жыл бұрын
Thank you!
@reggyforest5299
@reggyforest5299 9 ай бұрын
? my amps stop working, can i install an aftermarket amps and would it work?
@ZyeKeyZ
@ZyeKeyZ 4 жыл бұрын
@nextlevelhummer, do you know which wires are the line level ins to the amp? I’d like to tap into the stereo out before it’s amplified.
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
That I do not know..... sorry :/
@toddf4999
@toddf4999 3 жыл бұрын
Did you ever find if there are line level sub inputs going into the amp to tap into?
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Sorry man, that I dint know. I have always tapped from the speaker. Amplified or not. If you have a LOC with adjustable gain like the one in used it is not an issue as you can gain match it to the amps signal voltage. But it you do find out, let me know
@ericknaranjo2074
@ericknaranjo2074 Жыл бұрын
How did you remove the little door behind the sub box that gives access to the middle seat, do I have to remove the seat to take that off or can I unbolt it from the trunk?
@NextLevelCarAudio
@NextLevelCarAudio Жыл бұрын
I honestly don’t remember. It’s been a while man. Sorry :/
@Him-ny1zm
@Him-ny1zm Жыл бұрын
How do you run the wires for the power from the battery to the trunk
@akatheunknown4310
@akatheunknown4310 3 жыл бұрын
Any recommendations on replacing all 13 speakers on the 06 is250? Thinking about replacing all of them with something better, also what amp would you recommend for them?
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Dang man.... honestly I never done that. Yet. Ic was actually considering doing a full rebuild of the entire sound system tho. So stay tuned!
@edgaranaya7969
@edgaranaya7969 Жыл бұрын
Hi Lexus lovers, I'm having this issue "no sound from the stereo" I just replaced the nav and radio also check the amp and is good, but still no sound from the stereo. No fusse problems either. I just realized that the radio has no power what could it be the problem??
@NextLevelCarAudio
@NextLevelCarAudio Жыл бұрын
Sorry to hear that. Not sure about that :/
@Alvarwheezy
@Alvarwheezy 2 жыл бұрын
How much room is left behind the box for the amp? I was thinking of mounting my hifonics amp to the box so the logo would shine through the pass through when down.
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
Totally could! That’s where my amp is!
@daghostcity8780
@daghostcity8780 Жыл бұрын
i need that same box made where can i go ill do the same set up also
@nolimit6998
@nolimit6998 3 жыл бұрын
This is def what I needed too. I couldn’t find wires to connect for loc to work. But why did you cut wires off amp instead of just tapping into it?
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Because I am no longer running my stock sub, with no intent to ever hook it back up. So don’t want to send signal to amp if not necessary. You can totally splice in if you want to run your stock sub with your new setup
@nolimit6998
@nolimit6998 3 жыл бұрын
@@NextLevelCarAudio ahhhhhh which I thought. Thanks bro. Def needed help with setting up my boys system. Lol. Thanks again mang
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Anytime
@djdrama4252
@djdrama4252 3 жыл бұрын
So by using that output device and cutting the stock sub wires for the stock amp, are you cutting off the stock sub all together as well?
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Yes, but you don’t have to. I did not want the stock sub anymore
@djdrama4252
@djdrama4252 3 жыл бұрын
@@NextLevelCarAudio so what would be the best way to have both going? Would running the output device to same wires shown in the video and also connecting the sub wires (in the correct color order of course) cause any issues “output” wise?
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
No issues at all. Just leave everything connected from the factory as is. Then tap in the Line output converter to the appropriate wires and your good to go. 😎
@djdrama4252
@djdrama4252 3 жыл бұрын
@@NextLevelCarAudio sorry if this is a stupid question but how do you mean “tap in”? Dont you have to cut/take out the stock sub wires from the amp in order to connect to output converter
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
No sir.... just strip the insulation off the wiring of the harness going into the amp, don’t actually cut it, then connect your line output converter to those wires and button everything back up. You are set
@hangandrew
@hangandrew 2 жыл бұрын
Nice looking to do something like this. Man my amp is out again. My vol knob not registering…u think any amp would work? Or what would u rec?
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
Not sure man about the knob. That sucks. Any amp will work as long as it wired and powered properly
@Cavenchy
@Cavenchy 2 ай бұрын
Tried to do this but it went the whole wrong way idk what I did but now my radio doesn’t work at all and says audio off when I turn my radio on I tried reconnecting my wires back and connecting the amp back to normal and still have nothing anyone know what could be going on..?
@NextLevelCarAudio
@NextLevelCarAudio 2 ай бұрын
hope someone chimes in.... been a while since ive had this one done
@chrisduncan501
@chrisduncan501 Ай бұрын
U did something wrong bro lol he did it correct 100%
@user-xw3fn1ep9s
@user-xw3fn1ep9s 5 ай бұрын
Dedonde agarraste tu tiera para el ampli
@ExclusiveTint-CarDetailing
@ExclusiveTint-CarDetailing 4 жыл бұрын
Hey man nice info. Is it the same procedure with the ISF Lexus?
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
I wish i knew for sure man. I have never worked on the F. If the harness/ wire colors match i would say yes. If they are different in any way, i would do so me more research to make sure you tap into the right wires :)
@ExclusiveTint-CarDetailing
@ExclusiveTint-CarDetailing 4 жыл бұрын
@@NextLevelCarAudio thanks
@xeemhawj6507
@xeemhawj6507 2 жыл бұрын
Love it sound great… do you know where I can order enclosure for 2022 Lexus IS 350 f sport… thank you
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
Might want to check eBay for a prefab made for your vehicle specific. I’d not, having a builder do a custom enclosure to contour the trunk would be best
@xeemhawj6507
@xeemhawj6507 2 жыл бұрын
@@NextLevelCarAudio thank you so much for your input
@sugmadic8859
@sugmadic8859 4 жыл бұрын
So those connectors for the stock amp. You just plug it back into the stock amp? And how you install the bass switch
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Yes, after i spliced into everything, i then plugged the harnesses back in. the bass knob was JB welded in place. So it aint coming out/ moving. If i ever need to uninstall/ put back to normal i will just need to buy another trim piece and take out the modified one.
@sugmadic8859
@sugmadic8859 4 жыл бұрын
So the plug connected to the stock sub isn’t necessary to get to? (Other then unplugging it) Just tap into the plug that is connected to the amp
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
yes sir that is correct. I did end up completely removing the OEM subwoofer tho as it created a "passage" for the bass to come into the cabin a little better. i tried both with the OEM sub in and out... Out was a bit louder and less muffled sounding
@sugmadic8859
@sugmadic8859 4 жыл бұрын
NextLevelHummer thanks man. Ima do the exact setup after i replace the digitizer on the reciever
@NextLevelCarAudio
@NextLevelCarAudio 4 жыл бұрын
Yes sir, that is correct
@donnie555
@donnie555 Жыл бұрын
Yea I did all this the same way and my amp turns on but speakers aren’t working
@NextLevelCarAudio
@NextLevelCarAudio Жыл бұрын
Hmmm. That is strange
@ashtonbarran4652
@ashtonbarran4652 3 жыл бұрын
When you connect the speaker wire to the amp can you still use the stock sub and run after market amp and run aftermarket sub
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Absolutely, there are people that do that with no issues.... only reason i removed rear sub is to create a passage between the cabin and trunk to hear the bass a little more.
@ashtonbarran4652
@ashtonbarran4652 3 жыл бұрын
NextLevelHummer so when I did it today I wasn’t getting any bass from my sub I did every wire you said so what you think could be the problem??. The amp is getting power and everything the line input is so so idk
@ashtonbarran4652
@ashtonbarran4652 3 жыл бұрын
NextLevelHummer I have the 08 model
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
hey man, sorry to hear that. i don't believe there is any differences between the 08 and 11 as far as the stereo is concerned. but don't mark my words on that. could very well be the LOC, if there are gains on the LOC unit, make sure they are all the way up. Then use the gain on the actual amp to dial it in properly. the only other thing is your amp is just not getting any input signal. which means the incorrect speaker wires were tapped into. which may be slightly different from year to year. best thing to do to eliminate that possibility would be to verify the wires/colors from the oem rear sub/speaker to ensure you are tapping into the right ones for your vehicle. let me know if any of that helps. good luck
@ashtonbarran4652
@ashtonbarran4652 3 жыл бұрын
NextLevelHummer ok thank I’ll do my research and see what the wires colours are
@calizonajoe1126
@calizonajoe1126 3 жыл бұрын
Wonder if the wiring would be the same on my 2015 gs350 mark levinson.
@NextLevelCarAudio
@NextLevelCarAudio 3 жыл бұрын
Not sure man... sorry :/
@krisbramblett3328
@krisbramblett3328 2 жыл бұрын
What year of Lexus IS is this?? I have a 2012 and I’m bout to do a install myself, have the LC2i converter and wanted to know if my stock amp set would be the same as yours, I’m also local and Washington based would love to pick your brain on the set up!!
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
If your on Facebook. Find me under the name: Kuualii kanoa. We can connect on messenger there.
@NextLevelCarAudio
@NextLevelCarAudio 2 жыл бұрын
2011 to answer your question
@coltonbaker9563
@coltonbaker9563 Жыл бұрын
Is that a zen enclosure? Looks like one and I've been looking at one for my car
@NextLevelCarAudio
@NextLevelCarAudio Жыл бұрын
I honestly don’t recall… been away from the channel. Sorry
Lexus ISF Drama: Mark Levinson Subwoofer Upgrade How to & Review
27:28
Car Audio on a Budget? What should you upgrade first and last for YOUR SYSTEM?
9:23
Whoa
01:00
Justin Flom
Рет қаралды 50 МЛН
Кадр сыртындағы қызықтар | Келінжан
00:16
Prank vs Prank #shorts
00:28
Mr DegrEE
Рет қаралды 11 МЛН
2015 Mastercraft X55: Walkaround and Review
5:17
RACE CITY MARINE - Boat Sales Service Storage
Рет қаралды 2
I Figured Out What Shorted My Lexus IS250 Amplifier...
13:22
Chris Kheluram
Рет қаралды 43 М.
Lexus 3IS Audio Upgrade | Sub and Amp Install
14:34
Kenny Vo
Рет қаралды 81 М.
How Do You Match Car Subwoofers and Amplifiers?
12:13
Quality Mobile Video
Рет қаралды 993 М.
Popular Mods for Lexus IS 250 and IS 350
6:46
Marty Motoring
Рет қаралды 944 М.
Remove and repair subwoofer on Lexus ISF, IS250 and IS350 2008-2013
11:37
Prestige Auto Gang
Рет қаралды 33 М.