Hahahah I live in the worst part of Canada for pot holes but I still wanna lower mine

What’s his page on Instagram ?

Really the shape is way to girly looks like a tampon on wheels. The newr one looks alot better.

TY! I will be making an effort to be more active this year!

Hey thanks! Sorry for not being so active , Id like to fix that this year!

Don’t know if this helpes.. but you just take off the bumper and there’s 6 screws to undo

Slow Lantra is correct. Once you remove the bumper, follow the lines around the grill. There are 2 little plastic "screws" that are a little tedious to get out at the top of the grill/bumper, but be patient and don't tear them up, you'll need them to reattach. I used a scratch awl to push from the bottom forcefully but gently. That worked and I was able use them when I was done with my project. Once you get those 2 and the 6 metal screws out, you use a thin flat-head screwdriver to GENTLY pry up and I used another tool for the little plastic clips that line the bottom of the top grill, to push them towards the front of the bumper...that is nerve wracking - if you do it in cold weather, BE AWARE not to break anything due to cold - it's mostly plastic under there. It seems like a lot, but if you come with patience, you got it...If it feels like you're forcing, try something different.

You would have to Instagram DM the owner @lilnick_kc !

mostly anyone on ebay will work just measure it up.

VASI camber

no it doesnt

No I agree it looks better then stock grill

Looks better without the grill. On mine I remove the badging on the rear end. I left Hyundai logo because I discovered it had two holes for mounting a cheap plastic logo for some reason.

I do like the way it looks without the top grill. However on mine I just blacked out the whole thing, including logo. I think it looks great that way as well, but you kinda have to black out all badges like I did in that case.

Thankyou!!

What year an model u have?

You would have to Instagram DM the owner @lilnick_kc . The car has now been bagged since 2016!

You would have to Instagram DM the owner @lilnick_kc . The car has gone through some extensive changes since 2016!

You would have to Instagram DM the owner @lilnick_kc . The car has gone through some extensive changes since 2016!

Realist92 ya I did changed a few things

Nikola Krkljus I knew this was you. as always, making waves

Nick Yniguez Me too bruh!!!!!!

Depends on if you have a recirculating BOV or a vent to atmosphere BOV. Installing a cold air or short ram intake will increase the sound of the turbo spool. The sound of the blow off valve is what you hear fluttering which would be a specific kind you need, they each make different sounds.

@@ryann1494 it have a recirculating Bov a pipe connects back to the intake pipe so should I remove it and close it up

@@servant_of_merciful It depends if your car has a MAP or a MAF sensor. You need to search on Google to find out. If your car has MAP sensor, it will work. You can put a Rubber Chair Bottom Cap over the air intake cap and then leave the BOV open/not capped to vent it to the air and it sounds cool. If your car has MAF sensor and you do that it will mix up air/fuel ratio and car will run bad

@@ryann1494 thnx it have a map sensor

@@servant_of_merciful I looked on the forums and if you change air filter it can maybe sound like this kzfaq.info/get/bejne/a8WEZNNyvqrLqJs.html

Hey there , thanks for the support!! As far as I Know , its tucked away for the time being but still the same owner. It had the front subframe and wheel wells notched , and bagged to lay frame

Back to static still sitting in a garage 🤣

He's alive! @@nickkrkljus3462

Bro. Go answer all these questions LOL

Haven’t noticed the replies . Thanks for the feedback I have a 2014 putting some work into thanks for the inspiration 🤟

made it slammed af ;)

مرحبا

What does it sound like...

Lol

@@DieselMediaOnt where do you get that roof spoiler?

Both. Its now on air

Diesel Media how did you get so much camber on the backs? I'm stancing my 13 elantra and i can't find what I need to camber the backs anywhere

Mike W did you ever find anything?

The car has gone through some extensive changes since filming , message @lilnick_kc on instagram

que es kdm amigo

+Jesus Yvan MOSKO JDM se refiere a los autos Japoneses y el KDM a los autos koreanos :)

Химик 12 1.8 I'm from canada

I am from Kitchener , and Nick is from Niagara

+Diesel Media very cool!! I live in Kitchener, originally from Cambridge. I wouldn't doubt I've even seen this car around. Looks great.

maybe have some red accents

Go Silver and Gunmetal, some black is OK but black wheels don't look that great...

IyA Geli I think it's 17

If you wanna be static and hella flush the two go hand in hand

nick what size of your BBs rims?

divan osoba tbh it wasn't that bad I was used to it car isn't static anymore