Lund 1875 Impact XS Walkthrough (BOAT REVIEW)

Рет қаралды 27,753

Күн бұрын

Here's a "quick" walkthrough of my Lund 1875 Impact XS from top-to-bottom. Let me know in the comment section if you have any questions about the rig 👍
Special thanks to the Power Lodge in Baxter, MN:
bit.ly/PowerLodgeBaxter
More specs on my boat:
bit.ly/1875ImpactXS
Day-boxes for soft plastics:
amzn.to/3fCXzkt
▬▬▬▬▬▬▬ TIMESTAMPS ▬▬▬▬▬▬▬
0:00 Introduction
0:56 Transducers
2:23 Why I Wanted a Windshield
3:27 The Cockpit
4:36 Rear Casting Deck
6:20 Side Compartments
8:03 The Console
10:57 Rod Locker
11:58 The Bow Area (Front)
14:29 Mercury Pro XS (150hp)
15:41 How to Save Money on Electronics
#lundboats #walleyefishing
▬▬▬▬▬▬▬ SUBSCRIBE ▬▬▬▬▬▬▬
✅ Subscribe - bit.ly/SubToNicksChannel
▬▬▬▬▬▬▬ MY SOCIALS ▬▬▬▬▬▬▬
🔰 Instagram - bit.ly/NicksInsta
🔰 Facebook - bit.ly/NicksFacebk
🔰 Twitter - bit.ly/NicksTwit
▬▬▬▬▬▬▬ MY FILMING GEAR ▬▬▬▬▬▬▬
Camera - amzn.to/2NSHP16
Lens - amzn.to/2y0nSL7
Microphone - amzn.to/2zFruE8
Bendy Tripod - amzn.to/2xIK3G8
GoPro - amzn.to/2OZRKyu
Micro SD Card - amzn.to/2NTtaCH
Chest Mount - amzn.to/2xNRU5o
Extra Batteries - amzn.to/2DFDl9c
Laptop - amzn.to/2xMRL1X
Headlamp - amzn.to/2zFjxPu
External Power Pack - amzn.to/2NaP4fJ
▬▬▬▬▬▬▬ THANK FOR WATCHING! ▬▬▬▬▬▬▬
The above links are Amazon affiliate

Пікірлер: 127

@carterlarson9055 2 жыл бұрын

Just ordered an identical boat today! Can’t wait!

@mlmeyer79 3 жыл бұрын

Nice rig! Great idea about saving some money with the networked Birds. I just upgraded to a Helix 9 SI and it's changed my world.

@NickLindner 3 жыл бұрын

Thanks! Side Imagining is a game changer for sure.

@Riverlifeoutdoors 3 жыл бұрын

Nice boat nick !! 😎 sweet set up

@NickLindner 3 жыл бұрын

Thanks Joe! I'm pretty pumped about it.

@jeffamon8026 2 жыл бұрын

Awesome video!! Very informative. I'm actually picking up this exact boat in about 2 weeks.(as soon as they get it rigged) I can't wait to get her out on the water and put some hogs in the boat! Same setup networked hummingbirds but I'll have a terrova. Happy fishin!!!

@NickLindner 2 жыл бұрын

Awesome! Huge congrats Jeff

@ae7454 2 жыл бұрын

Great Job....Awesome video

@NickLindner 2 жыл бұрын

Thanks Dan

@chadsundstrom1661 3 жыл бұрын

Love the boat. I bought one in 2016. First boat for me and haven't been disappointed the least bit. Wish the older models would have came with the drawer system under the dash on both sides.

@NickLindner 3 жыл бұрын

No doubt, that's one of my favorite extra features on it.

@murrayg8786 2 жыл бұрын

Just go to your Lund dealer and order them, I installed them on my 2014 model, easy to install at home.

@no_regerts5176 Жыл бұрын

I have the same size boat with a 24v Terrova. I can troll all day long on a charge in calm waters. When it’s rough, I use the kicker for propulsion and the Terrova to move the bow.

@NickLindner Жыл бұрын

Yup. It's definitely viable to have a 24v system

@ross7684 Жыл бұрын

Great video! Wish I had seen it before I ordered a 1775 Adventure Sport two weeks ago. There wasn't a huge difference in price between the Adventure and the 1775 Impact but I really like the way the Impact is layed out. Lund kind of "cheaped out" on the Adventure's storage.

@NickLindner Жыл бұрын

Congrats Ross. Should be an awesome boat for ya!

@c.shoefish 2 ай бұрын

Awesome setup bro

@NickLindner 2 ай бұрын

Thanks!

@dwtest8851 2 жыл бұрын

Hi Nick. Great video. Can you elaborate on the two SI transducer setup and how you are using them? Are you using one for the "left" side and the other one for the "right" side on the Helix 10?

@jtn-minn8105 3 жыл бұрын

Very Nice!!!

@NickLindner 3 жыл бұрын

Thanks!

@jamieforsythe3501 3 жыл бұрын

Nice break down of your boat man! Loved the video. I am a fan of the impacts. Question for ya, between your 18' and your friends 20', does the 18' handle bigger lakes fairly well? Thanks for your time and tight lines!

@NickLindner 3 жыл бұрын

The 18 footer has been good for me so far, but I think you're definitely at an advantage with the 20 footer.

@scooterfishing9323 2 жыл бұрын

Beautiful video. I have subscribed. 🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩🤩

@brett_Thorpe Жыл бұрын

Nice boat! I just bought one. 2023. Can’t wait to get it on the water this spring. I will add a kicker. Then figure out the best system for down riggers. I won’t use them all the time. But I will use them.

@NickLindner Жыл бұрын

That's so awesome dude! That's gonna be an awesome rig for ya

@brett_Thorpe Жыл бұрын

@@NickLindner Thanks. So looking forward to getting on the water!

@zhelko 2 жыл бұрын

Thanks, Nick. Well done and informative walk through video. I’m rigging up a Crestliner 1950 Sportfish with Humminbird units and it was helpful to hear about your experience with them. I didn’t know that the prop can get in the way of side imaging. Is it impossible to do it with the motor down? Does any amount of trim solve this?

@NickLindner 2 жыл бұрын

Not impossible, but if you're having issues with the side imaging, definitely trim up.

@erichildreth7562 2 жыл бұрын

Man this is a very nice setup and your detail to attention is awesome!! I have been saving up for one of these and was going to go with just a side console but now considering a dual or the walk thru like you have. The only thing that I question is why is the helix 10 at the helm and the 8 is at the bow? Correct me if I am wrong but should it be the other way around so that the bigger graph makes it easier to see while standing? Just my 2 cents. I subscribed and thanks for sharing! :)

@NickLindner 2 жыл бұрын

Ideally both are 10+ inches, but I needed to save some money. I want a bigger unit at the console because I spend way more time back there. Also, I'm not always right in front of it. Especially when I'm trolling or live bait rigging

@randyh.3369 2 жыл бұрын

Excellent video and overview. One of the better videos I've seen. Quick question: Did you consider the 1875 crossover? The wider gunnels and deeper cockpit are pros but the loss of additional rod storage is the biggest con I'm wrestling with.

@NickLindner 2 жыл бұрын

I actually prefer the shinier gunnels and shallower cockpit for how I fish

@gtsum2 2 жыл бұрын

Nice looking boat. I’m about ready to pull the trigger on one myself. I will be doing a lot of blue cat fishing and need to mount a rear rod rack or more likely a T bar on either side of the motor…assuming it’s strong enough there? If you are famil it with t bars (with rod holders), do you think one could be mounted in the rear corners on each side? The ladder cover on the starboard side means it can’t be mounted there, but I was wondering if one could be mounted next to it? Can you get under neath there to put a backing plate in? Thanks for any info you can share and congrats on an excellent boat!

@NickLindner Жыл бұрын

Hey, sorry for the late reply. I haven't used a t-bar or seen one, but I can't imagine there would be any issues mounting one in the back of this boat

@gregdidiano2171 Жыл бұрын

Great walkthrough presentation!! Love the design of the Lund Impact, my concern is with the Mercury engine have you had any problems with it? Thanks

@NickLindner Жыл бұрын

No problems yet Greg!

@chrisgaudino7350 2 жыл бұрын

Nick, Love the boat. I'm going to be networking two Helix 9's ( MSI and one for mapping.) on my new tiller model. These graphs will be linked to my ulterra for Ipilot link. Any suggestions or recommendations I should mention to the dealer when they are rigging it up? Would love any feedback.

@NickLindner 2 жыл бұрын

Hey Chris. Sorry, just reading this now. Hopefully you got everything rigged up right!

@kenbrown5449 2 жыл бұрын

Enjoyed your style of presentation Nick. Good tips on cost savings you put out there. Nice boat. Well, of course it is... it's a LUND! :) Does your 2nd SI Transducer hook up directly to your NMEA unit? Or does it connect with the other SI Transducer and then on to the NMEA? Thanks! I get that bit of interference when the motor is not trimmed up enough also.

@NickLindner 2 жыл бұрын

There's a Y-cable actually

@JDPMN1 3 жыл бұрын

Good work Nick! Anything special you did with the trailer?

@NickLindner 3 жыл бұрын

Nothing special - just a standard roller trailer. I'm sure I'll do more in the future.

@bruceblatchford5944 2 жыл бұрын

Great set up. I have the same boat. Did I notice a double cup.holder below the live well in the rear. Is that a add on? Thanks for showing us. I love my boat and it sounds like you are satisfied as well.

@NickLindner 2 жыл бұрын

I believe that part of my rig was standard

@mjamesbateman Жыл бұрын

Great walkthrough. How easy is this size boat/trailer to maneuver by hand? Could you handle moving it around solo?

@NickLindner Жыл бұрын

If the ground is smooth, it's doable

@robertolson291 Жыл бұрын

Nice rig, and great walkthrough Nick! Have you tried trolling with your main motor, and if so how slow can you get? Seeing if I can avoid getting a kicker on the next boat; thanks.

@NickLindner Жыл бұрын

Hey Robert. I haven't trolled with the big motor. I like using the trolling motor

@rcruz1211 2 жыл бұрын

Did you look at the crossover xs when picking out your impact and what swayed you to the impact of you did.

@NickLindner 2 жыл бұрын

I've just been in a lot of impacts before and love how they lay out.

@Pitchpullin5 Жыл бұрын

Nick, this video really sits with me. I grew up in only bass boats as well, I love fishing for just about everything. I do have a question for ya, how's the draft on this boat? Thanks

@NickLindner Жыл бұрын

It runs great. Very efficient draft

@brs270 2 жыл бұрын

Awesome boat and video! It helped me make a decision to buy one myself. You mentioned that the under consul storage drawers hold 3600 size Planos. Is that what size boxes are shown in the video? I like how you have them organized in the drawers. I didn’t think the drawers were deep enough for 3600’s. Thanks in advance for the response and keep up the great videos!

@NickLindner 2 жыл бұрын

Yes. 3600 boxes. The 2075 impact can fit 3700s in the under console

@brs270 2 жыл бұрын

@@NickLindner Thanks very much for the prompt response!

@ol2533 2 жыл бұрын

Nice boat man. What views are you running on the helix 10 and helix 8 at the same time usually? I have just one helix and debating if I should get a second and what views to run on both to make it the most effective.

@NickLindner 2 жыл бұрын

It's nice to have Side Imaging on its own screen so you have more real-estate to see small marks. Then the other screen could have maps and 2D/DI sonar.

@EricH4777 3 жыл бұрын

Hey Nick nice rig! Just wondering how do you network all the units together I have a helix 9 di on my bow and a helix 9 si at the helm and a terrova I pilot link do they network by Bluetooth or do I need something to tie them together? My bow helix is already linked to my terrova but I don't think the helm unit is.

@NickLindner 3 жыл бұрын

Hey Eric - You need to hook them all together via an Ethernet Switch

@EricH4777 3 жыл бұрын

Ok cool thanks bud!!

@user-wy1nc5bk2v 6 ай бұрын

Hello, great video, the boxes you put in the sport top are, what model box is that? The area below the jump seats….thank you

@NickLindner 5 ай бұрын

Just Plano boxes

@user-wy1nc5bk2v 5 ай бұрын

Ok, thanks, are they the 3600s? Trying to best utilize the space

@Dc-jg2ti 2 жыл бұрын

Hey Nick, I have the same rig, purchased in 2018. Question for you- what do you do for a boat cover with that trolling motor on front. Is it permanently mounted? I have my ultrex up front on a slide plate so I can remove it when I want to put my cover on. It works but it’s a pain to do. Really it’s my only dislike about the boat

@NickLindner 2 жыл бұрын

I have the stock cover. Not sure ideal with the trolling motor. My dad got a custom cover (took the old one and changed the front portion to fit around electronics) and he's liking it.

@jeffwalsh54 2 ай бұрын

Nice setup. Where do yo lay your rods that you have out when your going from spot to spot?

@NickLindner 2 ай бұрын

Usually up front along the sides, sticking over the gunnels

@Tyler-ip5bc 2 жыл бұрын

Nice Boat ! Taking delivery of the same boat in 3 weeks. What dash mount is that you have for your Hummingbird?

@NickLindner 2 жыл бұрын

Hopefully I'm not too late for you! I have a Traxtech. Cisco would have been preferable (had to go with what was available), but I'm very happy with the Traxtech.

@TopWaterAssassin78 Жыл бұрын

I ordered the same boat a few weeks ago. I love the versilully of the XS. My current boat is a 15 foot bass boat and the Lund is definitely a huge upgrade.

@NickLindner Жыл бұрын

You'll love it man. Super versatile

@BumpNrun69 Жыл бұрын

Have you stored it in a garage and was there any height restrictions, getting it into the garage? If so, did you have to work with it to get it through the garage door like, maybe a drop-down hitch to lower it an inch or two? Lund states, 7 feet tall on trailer; didn't know how accurate that dimensions was, if they just rounded it off?

@NickLindner Жыл бұрын

This wouldn’t fit in a standard low garage, likely because it’s on the roller trailer. Might be better with bunks possibly? My buddy has a 20 foot impact with the windshield and it’s on bunks and he can fit in his garage in town.

@clarence1149 3 жыл бұрын

I am looking at this style boat also. Wondering how much this boat gets blown around in the wind while on the trolling motor? I bass fish alot, and my old 16' deep v was a hand full in the wind. In yout opinion is the higher cost of the pro v worth it over the impact? I know you have spent lots of time in Lunds

@NickLindner 3 жыл бұрын

I don't have much trouble in the wind, though it's not as good as a bass boat in that regard of course. My favorite boat in Lund's lineup is the Impact, especially for the price. If money wasn't a factor, I think I'd have considered the Pro-V, but there are different advantages to each model, so in some ways it's a personal preference deal.

@clarence1149 3 жыл бұрын

Thank's Nick.

@jasonboswell9249 5 ай бұрын

Do you have a Lund travel cover for this boat? Was wondering if the Lund travel cover and the Ultrex are compatible.

@NickLindner 2 ай бұрын

Sorry for the late response Jason. Just getting through my backlog of comments here. I have Lund's cover. It works no problem with the Ultrex.

@andrewkrzysiak2079 2 жыл бұрын

Nick, do you happen to know the height of the hitch when this boat/trailer is level?

@NickLindner 2 жыл бұрын

Honestly not 100% sure. I have a standard drop hitch on my suburban and it's a tiny bit high.

@mikeinmn6295 Жыл бұрын

Does your second MSI transducer interfere with the first or do you run at different frequencies?

@NickLindner Жыл бұрын

No interference, they run at the same frequency.

@Halfdead211 2 жыл бұрын

Nice boat..What’s the difference between this and the fisherman?Looks to have more storage

@NickLindner 2 жыл бұрын

Honestly, the layout is quite a bit different

@frankmangieri2077 17 күн бұрын

nice rig dude! do you prefer a roller trailer over a bunk? and why ?

@NickLindner 16 күн бұрын

I actually don't have a strong opinion tbh. I like both. The roller isn't viable with a bigger glass boat, but there are nice aspects with these aluminum Lund boats.

@sha6mm Жыл бұрын

Nick I am looking at this boat as well is there anything you wished you had done different ? TC

@NickLindner Жыл бұрын

I'm actually happy with it. It's a simple setup and it works great. Anything different would be fancy stuff like bigger graphs or stuff like that. I guess I don't really need the bait well in the front.

@MrHf4l 2 жыл бұрын

Have you had this boat on LOTW? If so, how does it handle the big water?

@NickLindner 2 жыл бұрын

Not yet! For an 18.75 foot boat, it runs well in big water though. Wouldn't want to be out in the big lake during a massive storm though. There's a reason they run those massive launch boats up there.

@everetthobbies2062 2 жыл бұрын

Do u think a 52shaft ultrex will work on 1775 impact

@NickLindner 2 жыл бұрын

I don't think it would be amazing

@mnfarmerfarmer3600 2 жыл бұрын

My LOCAL dealer says if I installed a 2nd mega side transducer I would lose my HIGH speed transducer for some reason. I have 1-helix 9 G3n mega and 1-helix 8 G3N mega on the dash with a ethernet port box. I want to get another Mega side transducer mounted on PORT side of my kicker motor..

@NickLindner 2 жыл бұрын

That doesn't make sense to me, but I also wouldn't claim to be a rigging expert.

@robertwong5026 2 жыл бұрын

The thought of storing something so expensive outside on my driveway is holding me back. Where do you store yours?

@NickLindner 2 жыл бұрын

I've parked it in my back yard when I was living in town. Definitely had anxiety as Brainerd has it's fair share of crime in town. Luckily I'm out in the country now.

@jayb7675 3 жыл бұрын

How much did the boat cost with the trolling motor and fish finders?

@NickLindner 2 жыл бұрын

Honestly, I would have to go back and look at the spreadsheet. I don't want to throw out an inaccurate number. North of $50k though.

@brianarbuckle91 2 жыл бұрын

Can you tell me what shaft length you have on your ultrex?

@NickLindner 2 жыл бұрын

60 inch. Needs to be long

@Andypaul78 3 жыл бұрын

On your battery set-up are you running lithium?

@NickLindner 2 жыл бұрын

Not this year. I'd consider it in the future though.

@oakgarage3834 2 жыл бұрын

What is the weight boat and trailer combined ?

@NickLindner 2 жыл бұрын

Actually not sure

@jimd.2378 5 ай бұрын

60" shaft on bow mount long enough?

@NickLindner 2 ай бұрын

Yessir

@austinhopper6158 Жыл бұрын

Does the travel cover work okay with the ultrex on there?

@NickLindner Жыл бұрын

It's not perfect, but it gets the job done for the most part.

@austinhopper6158 Жыл бұрын

I should’ve asked before but if you had it to do over again, would you go with the 36v ultrex or do you think the 24v is plenty?

@coleharvey1885 2 жыл бұрын

How does it handle rough water?

@NickLindner 2 жыл бұрын

Very well for an 18 foot boat in my opinion

@kennyd2134 3 жыл бұрын

Hey Nick, Ive got a 1775 Impact XS and stuff in the glove box does get wet, sorry.

@NickLindner 3 жыл бұрын

Hey Kenny. It certainly doesn't have a waterproof seal, but I haven't had any experiences where things got noticeably wet in there. I have papers and whatnot in there, too. To be fair, we haven't had a lot of rain this year, so it hasn't been a huge factor. Thanks for the clarification though - I should have been more clear in the video!

@bobloshek713 2 жыл бұрын

@@NickLindner Great video! My stuff has gotten wet in my Impact only due to a downpour. Other than that, it is an awesome boat!

@kennyd2134 Ай бұрын

The drink/ cup holder has drip holes in the bottom, thats where my water gets in. LOVE MY BOAT! Its June 2, 2024, going to Vermillion last 2 wks of June, if your there and see a boat identicle to yours float over and say hello!

@iceboundmb 2 жыл бұрын

If you need anyone to keep the boat busy for you let me know!

@NickLindner 2 жыл бұрын

Haha, don't worry - she's getting a workout down here!

@AdamCraigOutdoors 3 жыл бұрын

that boat is ok, i mean it's no 1236 jon boat or anything. lmao Sexy boat Nick!!

@NickLindner 3 жыл бұрын

Haha thanks, Adam. I think a 12 foot Jon boat is in my future, too. I'm itching to get out on a few of my favorite rivers, but water levels are crazy low!

@AdamCraigOutdoors 3 жыл бұрын

@@NickLindner i generally fish small ponds for native trout or stocked trout. So a jon boat and 4hp can't be beat. But Lake Nipissing is in my backyard and it would be awesome to have a boat like yours out on it!!

@NickLindner 3 жыл бұрын

@@AdamCraigOutdoors no doubt. I've always wanted to fish there