All I wanted was to learn enough to buy a good budget knife for work but here I am... Watching Nick Shabazz and Metal Complex almost every day; enjoying the thrill of hunt for many many knives I’ll never own lol
@NickShabazz4 жыл бұрын
It's a rabbit hole!
@Hexsyn4 жыл бұрын
Truth.
@garethbaus54714 жыл бұрын
Opinel is a great choice, nothing wrong with other knives, but thin blades slice and few knives are thinner than opinel.
@fredminpin4 жыл бұрын
@@NickShabazz Started collecting a while back, you're not kidding about the rabbit hole. There are so many cool styles and designs, could have used your knowledge and wisdom years ago.
@-Derp-4 жыл бұрын
try spyderco or byrd, i havnt looked back.
@csknives4 жыл бұрын
I'm just here for the TRIAD LOOOOOOOCK comments.
@gzo3134 жыл бұрын
Good lock, but an ugly knife.
@whiteroseproject72074 жыл бұрын
@Backyard Samurai I've never had a bad QC knife from cold steel. On the other hand I've had some atrocious shit from benchmade an besides from being over priced they seem to be under heat treated in cut tests. The only problem with CS is lack of higher end options. Cold steel + gold class options = perfect imo
@csknives4 жыл бұрын
@Backyard Samurai Dang man, you're still at this? Haven't heard from you in a while. Hope you're having a great New Year! I miss your videos.
@metal_complex4 жыл бұрын
🤣🤣🤣⚔
@iansharpe84204 жыл бұрын
I don’t own a cold steel but I ❤️ cold steel
@moustacheman71304 жыл бұрын
I came in mostly for the strongest lock. When he said ‘unsatisfying answer’ I immediately thought of fixed blade.
@joelstatosky18173 жыл бұрын
Maybe fixed blades are truly the best
@gwailotus91542 жыл бұрын
@@joelstatosky1817 - yuh think?
@-trmxzer0-2354 жыл бұрын
THE STRONGEST LOCK IS THE CAPS LOCK BUTTON ON MY KEYBOARD
@NoOne-ki3bm4 жыл бұрын
- Trmxzer0 - Haha.. nice
@thecovidprisoner4 жыл бұрын
Witty, humour is 'A Beautiful Thing'. 😀
@SRG_Donnelly2 жыл бұрын
Ahahahhaahhahh
@FightingTemplar4 жыл бұрын
If you really want to know....Blade HQ several years ago did a very extensive test of all lock types, where they put stress on them to the point of failure. If I remember correctly, the lock back came out on top.
@NickShabazz4 жыл бұрын
Yep, back locks and variants (e.g. tri-ad lock, scorpion lock) are very, very strong.
@michaelmechex4 жыл бұрын
I think they did it on some Spydercos, and ball bearing lock locked very well. I think the blade broke even before the lock failed. Not sure though, It's been years since I've seen that video.
@michaelmechex4 жыл бұрын
@Castle Bravo I remember a test with Spydercos only, but they did more of them.
@FightingTemplar4 жыл бұрын
I was Attempting to be brief in my first post. LOL! When they did the first test, it was a bunch of different locking mechanisms by several different manufacturers. Then they thought it would be more accurate with less variables in manufacturing and quality if they just did one brand with consistent manufacturing. So they chose Spyderco and did all the different locking mechanisms with Spyderco on the second trial.
@FightingTemplar4 жыл бұрын
Mikuláš Mecháček You are correct,See my post below.
@CanadianCuttingEdge4 жыл бұрын
Thanks Nick, for the rational comments about what is a good enough and safe locking mechanism.
@markryan93235 ай бұрын
If you love knives, this video is the best way to spend your 30 minutes. I got a lot of good good points. Also simple and easy to understand. Thank you, Sir!
@gambitgaming45734 жыл бұрын
Who else knew all of this but still watched the whole videos 😂
@BrianBarry344 жыл бұрын
LMAO, that “cop out” was countered by the Fixed Blade card. Very well played Nick, hilarious and informative, and absolutely perfect info as always.
@micgalovic4 жыл бұрын
This is a very helpful video for newcomers to the community. It can be hard to get to know all these things and the knife nerds usually forget how it was when they were new to the hobby. Anyway, I think that you had a great point, that every modern lock is theoretically strong enough for every day use, but all of them can fail if not designed/made properly. We should seek real quality over theoretical strength of a lock when looking for a knife.
@bigsean24734 жыл бұрын
well if our using your knife in the way it should be used a lock means nothing. the blade will be pressed up into the opened position against a blade stop made of steel. so it wont close on you anyway. its when you get to trying to use it in a none designed way that locks get stressed and become important for the user so you dont lose a finger. but thats just my opinion
@tonyhoodlass18462 жыл бұрын
Totally Agreed
@tonyhoodlass18462 жыл бұрын
@@bigsean2473 Yep
@Agent28Rock4 жыл бұрын
SpyderCo's compression lock is my favorite locking mechanism. It may not be the best to other knife enthusiast, but I love how easy it is to work and how strong it is for my use
@tonyochoa70973 жыл бұрын
yeah,me too
@D2ArkaAra3 жыл бұрын
New to knives here. But I've been watching your videos, Blade HQ, and Metal Complex videos for days now! I'm hooked haha I just ordered my first knives today. Got the Ontario Rat II in D2 (sadly with the cheesy looking carbon fiber, I wish I had watched your review before ordering lol), and the Civivi Elementum in black G-10 and D2. Just wanted to say I appreciate your content greatly! You're one of the more critical people and it's really helpful. I mean you don't like crap on stuff but you seem to have no reserve pointing out flaws or things you don't like, more so than others.
@timnichol65664 жыл бұрын
I just picked up the spyderco smock. Loving this button lock compression lock... so good :)
@mmorgado14 жыл бұрын
The strongest is Triad Lock. Point. Now... one may not need that kind of strength, but Triad is the strongest. 🙂👊
@etherealicer3 жыл бұрын
lionsteel daghetta... could be a valid contender for the title, a "sliding-bar-back-lock". That said, the only time a knife failed on me, it was the frame not the lock :D
@etherealicer3 жыл бұрын
Thinking about it, it should be possible to make a "sliding-bar-triad-lock"...
@davids95494 жыл бұрын
I live in the UK where locking knives are legally problematic, so I only have a few. Particularly interesting therefore to see your illustration of actions and mechanisms I will seldom encounter. Really interesting and educational thank you.
@davids95493 жыл бұрын
@@lakinwillson4124 Quite so! But don't say that too loudly or they'll ban slipjoints too!
@willieboy30114 жыл бұрын
Since guns or fixed blades are not legal or practical to carry, locks for folders matter. Anyone can have a self defense encounter where a EDC knife is used for self defense, and a lock failing can be disastrous. It happened to me. Thanks for this video. A knife is the right tool for self defense, but it must have the right lock.
@LastBastian Жыл бұрын
Great video! Fantastic collection! (I'm Jealous) but I see one glaring omission here. A simple tried and true folding knife design that's been around for thousands of years... The Balisong. (Butterfly knife) Possibly the strongest lock design of any folding knife. Even if you suck at fancy flipping, you still need a good bali in this amazing collection!
@PooMonkeyMan4 жыл бұрын
Honestly, I came for the info, but stayed for his puns. Gotta love his puns. They’re always so sharp.
@jamesbarisitz47944 жыл бұрын
Solid coverage of the State of usual locks today. Got my EWC a few days ago and love the action both opening and closing. A very unique design that is a 10 on the cool scale. Thanks Ray!
@cognusthorne3194 жыл бұрын
I half expected this to be a 10 second video of Nick saying it doesn’t really matter and if you’re asking that question, get a fixed blade😂
@CemichalJesus2 жыл бұрын
Its a 30 minute video instead, but the point stays the same
@x8venom8x4 жыл бұрын
Love your videos. They got me into the EDC life, much love from Texas
@monkeyfaceII4 жыл бұрын
DizzyDee Edc Life for life haha
@K3Flyguy4 жыл бұрын
In my opinion, I find large Folders hard to clean after gutting game, so Fixed are the way to go for hard hunting use. Folding pockets knives are small and used for small nonabusive jobs. Right tool for right job. Love em all, I just don't use large Folders except for looking at, trading, customizing, fun to work with. To each his own!!!
@tonyochoa70973 жыл бұрын
If I 'gut'something,I'm going to be throwing that knife in the river asap
@mistersmith39864 жыл бұрын
I had a liner lock fail and get stitches. Also had an Axis lock fail on me. Ever since then, it's been ONLY Cold Steel Tri-Ad locks for me. I'm still doing some research on if there's a frame lock I would trust.
@paulbaumer82104 жыл бұрын
Umm. Try a fixed blade?
@delmaneboshoff56104 жыл бұрын
have a "fleamarket copy" of the Spyderco Polywog with a modified Axis lock and i have used and abused this little fkr to hell and back and not once has this thing even shown a sign of failure of any kind. i dare say this copy is as strong or indeed STRONGER than the original damn thing in that the entire thing is ALL stainless construction. im not easily impressed by a knife but this one really surprised me. i also own a number of other brands from CS, Benchmade, Spyderco. i like them all and each although having their limitations in some regard or another, all perform as expected.
@gregorygolden129611 ай бұрын
I have had a few Kershaw linerlocks, I never could trust them. I bought a Clip point Cold Steel Recon-1. No more linerlocks or frame locks. I do have a Steel Will Apostate with the frame lock, I only carry that when "out on the town" but the Triad lock is what I trust 100 percent..
@mistersmith398611 ай бұрын
@@gregorygolden1296 Steel Will Apostate is an awesome knife 👍
@gearandoutdoorger.39354 жыл бұрын
I'm sorry if my English is not absolutely correct. Greetings from 🇩🇪. Locking blades are a thing I'm struggling with, since i cut myself with a buck 110. I abused it too much. Clearly my fault, but at this point i started thinking about locks in general. You have slipjoints, locking blades and fixed blades. In my opinion it's a bit like climbing with a robust rope, without a rope and with a rope that holds a little bit. If you're climbing with robust rope (fixed) you know that nothing can happen. You don't have to be careful. If you're climbing without a rope (slipjoint) you are much more careful because you don't want to hurt yourself or die. But if you are climbing with a rope that holds some weight but not that much, you never know what happens if you make a mistake and in the end you are as careful as if there is no rope at all. So, what's the point of locks? I hope you understand what I'm talking about.
@cyclopsamurai Жыл бұрын
Blade Hq's 2nd lock strength test, circa 2016: kzfaq.info/get/bejne/e7ioe7iJpqy6o2g.html&si=EnSIkaIECMiOmarE&t=725
@chrisherbert44544 жыл бұрын
Best Axis. Period also thrilled to see the patent expire to see what other manufacturers do with it.
@ohiogarbageman95074 жыл бұрын
Your opinion period. Even though my daily carry ATM is a benchmade super freek, ill never (probably) buy another axis lock knife. I just dont like it. Much prefer a frame or liner lock. So many knives for so many preferences.
@chrisherbert44544 жыл бұрын
4 4c 75 74 68 65 72 61 6 it is an opinion for sure and I’m sure the comments for this video will be varied and very opinionated. So with that I’ll say to each there own but for me the Axis lock gets three things right. 1. Accidental folding or failure of the mechanism is extremely low 2. Fingers never need to be in the path of the blade while closing 3. Super fast one handed deployment and stow of the blade
@ohiogarbageman95074 жыл бұрын
@@chrisherbert4454 That I can agree with.
@ChimeraActual4 жыл бұрын
Agreed. And the Benchmade assist version has a secondary lock that locks it open or closed.
@JackieDElia Жыл бұрын
Thank you for explaining this for a beginner to understand.
@batcarpet12254 жыл бұрын
I think one thing you should mention is lots of locks will work better or worse depending on how much hand dexterity you have, like the deadbolt may be easier than a liner lock if you have gloves, or the axis may be easier than the triad lock if you have weak hand muscles
@masalpert4 жыл бұрын
Man justifies knife addiction. just messing with you, nice summary video, this will be a great video for people getting into the hobby.
@macgyverbryan13774 жыл бұрын
There's nothing wrong with having a backup or thirty.
@ChimeraActual4 жыл бұрын
Excellent review, thanks. I've heard some people worry about an automatic or assist opening in their pocket. I don't think that happens very often and I don't worry about it, although it has happened with my Boker pin lock -- I don't pocket carry that any more. A secondary lock which both locks the blade open and closed would satisfy the worriers. Benchmade assists have that secondary lock, it locks the slide lock in place, either open or closed. At least it does on my Barrage. The Opinel can get a little sticky to open, being wood. The way to open it is to unlock it and lightly tap the extended knob at the end of the handle on a hard surface.
@vigeboss10392 жыл бұрын
I have had knives for years and used them for all kinds of purposes. IMO back locks are the strongest locks on folders out there period. Of course if you truly want the most durable knife for any use I would recomend a fixed blade.
@cyclopsamurai Жыл бұрын
Same in this test: kzfaq.info/get/bejne/e7ioe7iJpqy6o2g.html&si=EnSIkaIECMiOmarE&t=725
@LastBastian Жыл бұрын
I'd put money on a well built Balisong beating a lock back any day if the week for strength.
@DirkWerning4 жыл бұрын
Excellent video Nick thanks for touching on so many options.
@matlong54463 жыл бұрын
😂🤣😂 what a great vid. You come in thinking, “I’m finally going to find out”, and you leave realizing the revelation that, “WOW! He’s totally right. Any locking mechanism will do the job so what does it matter.” Buy a damn fixed blade if you need the strongest lock! Great vid! 👍🏻
@MarekKrupa13114 жыл бұрын
New drinking game. Take a shot every time Nick says "A beautiful thing"
@havoc1zero4 жыл бұрын
Been doing it since you mentioned it 5 months ago. Pretty much an alcoholic now. Thanks.
@tacklecentralfishing10514 жыл бұрын
#dead
@blueeyeswhitedragon98394 жыл бұрын
Great video...muchos infos. I'm glad to learn that I'm not the only knife knut that forgets the name (model) of a knife in my collection. I was worried about dementia, but not so much anymore...thanks.
@luissaavedra59484 жыл бұрын
Awesome explanation thanks greetings from the super ancient megalithic city of TIAHUANAKU BOLIVIA 🇧🇴
@americangoombah4015 Жыл бұрын
I avoid linear lock as much as i can. Frame and back locks I like. Simple, easy, hard to mess up.
@MLFreese2 жыл бұрын
Your speaking and presentation style is mesmerizing. Very informative video. Subscribed!
@DrakeDragonheart4 жыл бұрын
Just to clarify, the bolsters are the parts around the pivot or the overlay over the pivot area. What covers the lock bar or the rest of the handle would I guess just be the scales or overlays. I would suggest adding a Superlock when CKF comes out with their SnecX collab!
@wrliggin24 жыл бұрын
Even as a leftie, the compression lock is still my favorite. Axis locks are really close, but I prefer Spyderco designs
@theshapeexists4 жыл бұрын
You can order left handed compression lock knives from spyderco. I have a friend who works there and showed me a few
@ecksdog4 жыл бұрын
theshapeexists yes Spyderco does make a few lefty compression locks but only basic black handle silver blade varieties.
@benengel16874 жыл бұрын
Spyderco designs are the very reason I DON'T like them
@eddyram40723 жыл бұрын
Thanks Nick for another indepth tutorial
@anthonyp70514 жыл бұрын
This vid is clear case and point why you sir are my go2 reviewer
@bunberrier2 жыл бұрын
Nice watch. Thanks for the tour, Nick. Im new to knives and was looking for something as a last ditch approach to self defense. ( Recent shoulder injury has mostly knocked out my right arm's formerly good strength, until and unless therepy and time can restore it) The diversity of folding knives was at first overwhelming but Im learning. The fear I have about some of these lock methods is in a struggle its possible it could become unlocked. The lock the Cold Steel company has seems the best to me so far, like on the SR1. The unlock is physically covered by my hand. Still learning.... thanks again.
@mountainmanwatchreviews80814 жыл бұрын
Triiiiiiiiiaaaaaaaaaaaaaaad!
@metal_complex4 жыл бұрын
🤣
@mountainmanwatchreviews80814 жыл бұрын
@Backyard Samurai first of all it was a joke referencing a meme and secondly just because I've shown budget blades in videos doesn't mean I haven't owned other knives....I've had cold steels and even Chris Reeves, Medfords and customs just didn't do videos on them.......
@manstersr2 жыл бұрын
Thanks Nick, you're entertaining to listen to. To a southern boy, you sound like a "wise guy", (pun intended). But really, you are a smart man, that was very informative, I've been collecting knives for a few years and had never seen a few of those locks. I'm looking forward to your disassembly video. I like any lock that keeps me from cutting my fingers with an unintentional closing of the blade. Slip joints are probably the only dangerous knives around. Unless you use the knife for something that it was not intended for (like using it as a punch and hitting it on the end like a chisel) you probably shouldn't have a problem and the strength of the lock won't be an issue. The only time I've had a knife (slip joint) close up on my was when I was trying to use it as a hole punch or reamer. I do like my Firebird (Ganzo) knives with the Axis (sliding bar) lock, like you said you can pull the lock pin back against the spring and the blade is free swinging so with a little bit of practice you can flip it open or closed. They also have very free swinging liner locks because all their knives use bearing pivots and blade flippers.
@bach57804 жыл бұрын
Lynn Thompson doesn't give a damn! He's out there cutting up cinder blocks right now!
@csknives4 жыл бұрын
Something like that, actually.
@Psittacus_erithacus4 жыл бұрын
Thanks Nick, detailed descriptions with examples helped to flesh out the understanding I had from looking at diagrams. I liked your insight into pros & cons of each; but I gather there isn't all that much to say about locking mechanisms. Would love to have a video from you on deployment mechanisms (flipper/thumb stud/front flip/etc). More insights to be gleaned on that front I imagine.
@randallkelley35994 жыл бұрын
I believe BLADE HQ did a big test of various types of locks. Cold Steel also has a vid up. I believe the old back lock was about the strongest in testing static load.
@batcarpet12254 жыл бұрын
Blade hq has made that video, and I believe youre right, but almost all the locks took so much force to break that the knife part of the knife became pretty much irrelevent
@cyclopsamurai Жыл бұрын
@@batcarpet1225 Blade Hq's 2nd lock strength test, circa 2016: kzfaq.info/get/bejne/e7ioe7iJpqy6o2g.html&si=EnSIkaIECMiOmarE&t=725
@BradGryphonn3 жыл бұрын
I almost made my first KZfaq video. But Nick (and others) have already done it...Ah well. I'll just stay an avid watcher and commenter.
@brenthokanson44784 жыл бұрын
Love your reviews you do a great job Informative and entertaining thanks
@jfnurod4 жыл бұрын
A failed lock on a SOG is actually what started my "higher end" knife collection. Believe I bought a PM2 sprint and it was game over from there
@thefinder80874 жыл бұрын
Same here. Wanted a real pocket knife and mistakenly bought a SOG. The thing broke apart after about a month. After that I got a Delica 4...that started the addiction.
@jfnurod4 жыл бұрын
@@thefinder8087 I had a SOG trident that failed on me and cut me right to the bone. Initially I wanted a lock that would never fail and I saw a blade hq video of them cutting a tree down with the PM2. Thousands and thousands of dollars later here I'm 😂
@ringingsteel87294 жыл бұрын
Man I need a Parata. Not sure why, but I’m a fan of that design.
@mrfahrenheit38674 жыл бұрын
It caught my eye too 🤪
@ringingsteel87294 жыл бұрын
Scott eDog yeah then I saw the full review, and it’s only vg10, and in the Japan factory. If they’re going to do a knife with an interesting lock do it in Taiwan with a good steel.
@gregorygolden1296 Жыл бұрын
Carry a RECON-1 with the Tri-ad lock. I never have to worry about lock failure. Not the prettiest knife, but if the world was to take a shit I am glad it's in my pocket everyday.
@damonoates77793 жыл бұрын
This video= A beautiful thing
@jorgefernandez6407 Жыл бұрын
This is a GREAT VIDEO Nick!!!
@iansamuelson36664 жыл бұрын
Great video Nick. Thanks for taking time to talk to us lefties. It's the reason I'm on the video to begin with.
@TheTuneAce4 жыл бұрын
My fixed-blade, combat Bowie knife fits nicely in my watch pocket 👌👌👌
@Pinki20194 жыл бұрын
Good video. I think the safest slip joints are the ones with finger choils that make the blade impossible to close when your finger is on them, like on the Spyderco Squeak.
@NickShabazz4 жыл бұрын
I agree completely!
@wizardofahhhs7593 ай бұрын
BUCK gets credited for "inventing" the lockback design but the fact is that design had been around for many decades before BUCK started producing the 110. They just popularized the lockback design (and possibly improved upon it) not invented it.
@SuperBromsgrove4 жыл бұрын
Interesting video, I am wary of new to me designs so usually stay with back locks.
@DoubleAIV3 жыл бұрын
That protech is beautiful
@cvlpa4 жыл бұрын
Nice video! I prefer the compression lock just for the smooth, silent and safe one hand action. When I’m cutting packages or tape in the office the knife will be back in my pocket even before my colleagues realized I had a knife.
@sphill_edc4 жыл бұрын
Great video Nick
@daviantanner88782 жыл бұрын
I've been collecting knives for a wile and the longer I do it the more I find that knives are like Pokemon, and I must collect them all...
@easyki844 жыл бұрын
That feels like, Nick needs a reason to show off his collection.
@chefboiarby3043 жыл бұрын
I'm going to have to disagree and say that for most utility based applications, the back lock is the way to go. As much as I like my other knives, my back lock knives are the ones I carry most due to the strength in the design, lack of free swinging action, and lack of accidental openings. Their ease of use and recognizability also makes them inherently less frightening to non-knife people. Yeah, a fixed blade is best for hard use, but if that isn't an option for legal or other reasons, a back lock is likely the way to go. In my experience, the more simple, traditional, and boring a knife is, the more acceptable it is to have.
@brertt83502 жыл бұрын
I did a bunch of research and came to the conclusion that the triad lock is the only lock that is substantially stronger than other locks almost every other lock the only thing that matters is ease of deployment and closing and a reliability of deployment, lockbacks will close and open reliably, but i could open and close 9 out of 10 knives more quickly and easily than a lockback, honestly the marginal difference in strength isnt worth it on a back lock. I would also put axis lock up there with triad lock because it is less likely to fail from impact and is better for battoning even if its not recommended its a genuinely more beneficial strength than everything but triad lock.
@astralshore2 жыл бұрын
Still waiting for that Buck 110 disassembly ;)
@DavePotokar4 жыл бұрын
When I was a kid a friend of mine had the brilliant idea to stab a basketball with a traditional backlock knife some 40 years ago. He used an overhand grip. I just knew even at 10 years old this wasn't going to go well. He squeezed the knife hard and inadvertently depressed the backlock with his grip and while stabbing the inflated basketball the knife closed on his fingers. It is the reason today that I still cringe when I see backlock knives. I can still see the horror and is the only flaw I can find in that lock. Not a good choice knife if you intend it as a stabbing tool. Food for thought.
@Osprey19944 жыл бұрын
@Daniel Alejandro You're suggesting that they are immune to this? God you guys are annoying.
@valkyriesurvives51094 жыл бұрын
@@Osprey1994 it would be a lot harder. Triad locks have a really long travel before they free the blade completely
@gwailotus91544 жыл бұрын
@@valkyriesurvives5109 - i hope u r right because The Potos comment has me very FRUSTRATED that after literally hundreds of hours of knife research i thought i finally found the right knife to invest in until i read his story.
@aproXXim9 ай бұрын
Yes because all back locks are the same and so you should just straight up dismiss any back locks without any research. Liner/frame locks have taken more fingers than other locks. 😂
@anstef1485 Жыл бұрын
I am surprised that you did not mention the ball lock which is in my view fairly common among knife makers. I have a few knives with those in my collection. The nature of the lock will allow for easy deployment or a more difficult one. The back lock for exampe is harder to deploy because of the tension of the spring, and you will not find a flipper with such a lock mecanism. Overall a good slip joint will be much more secure to use (because of the consistency and resistance) than a cheap locking knife that can fail at any time.
@mickkeim41424 жыл бұрын
Nice lock review...I didn’t know there were so dang many locks. That’s a bunch of locks.
@Veesaki4 жыл бұрын
Great information ! I gotta get that Shabazz Autograph Pocket knife , no doubts !
@jimmymckay734 жыл бұрын
You left out, in the pun category, a button pun . Which really pushes my buttons!
@zhiyongyao569711 ай бұрын
Very interesting
@MikeJones-vb1me3 жыл бұрын
I love that Hank Azaria is into knives.
@williamscott18004 жыл бұрын
what is that beautiful little Protech
@MrQbee873 жыл бұрын
My first video of yours. THX for all the info I needed. Also I love your voice and accent. I would love to listen to an audiobook read by you, something by Twain would sound awesome. SUB.
@CumSmoothii Жыл бұрын
Seeing all of these as a balisong enjoyer lol
@LastBastian Жыл бұрын
Everybody seems to forget about balisongs when discussing lock strength. Lol Balisongs have been around forever, and still a stronger locking mechanism than any of these other pocket knives.
@dougbulldog99474 жыл бұрын
I got me a Yale, works fine
@IlliniDog014 жыл бұрын
My favorite is the Smock Button Compression Lock.
@matthewadler13292 жыл бұрын
My friend told me that the tri-ad lock is stronger than a fixed blade. He knows everything about knives, so I'm inclined to believe him.
@NickShabazz2 жыл бұрын
... Godspeed.
@LastBastian Жыл бұрын
"stronger than fixed blade" ...no offense, but that is ridiculous. Your friend doesn't know what he's talking about.
@erhon54 жыл бұрын
So... is the compression lock the triad lock of the liner locks... hmmm 🤔 (Just a weird thought, I need more sleep haha)
@funghiman84924 жыл бұрын
With the external stop pin (e.g. Sage 5) it certainly is Tri-Ad among liner locks. With a default setup like Para 2 and Junior it's more like a Lock Back among liner locks-that cut out for the stop pin through the liner does weaken the liner itself at some degree.
@alisuperhornet4 жыл бұрын
Where's the ball-bearing lock?! #HowDareYou
@pauldayton52853 жыл бұрын
Right!? I've got the Manix 2XL 💯❤🔥❗
@rlanger31083 жыл бұрын
It and the bolt lock are basically patent protection bypasses of the axis lock. Granted, they are better cause of the lack of omega springs.
@pauldayton52853 жыл бұрын
@@rlanger3108 The Ball Bearing lock is better than the AXIS lock in more ways than just spring's. The design of the Ball Bearing lock is COMPLETELY different than the bar lock / "AXIS" lock making it stronger & more reliable. There's only one spring on the Ball Bearing lock that has a vertical metal rod going through the middle of it. That rod & spring are pushing a circular steel bearing into the notch of the blade that is also aligned into the metal framed back spacer making it all one solid metal piece when engaged. The Ball Bearing lock is also self adjusting as it wears insuring that the lock will never develope "play". You can upgrade the Ball Bearing lock too with titanium ball cages , ti liners & a ti back spacer making is way stronger than it already is. There's no upgrades available for the AXIS lock other than ti omega spring's that I know of. Lock bar or "AXIS" locks use two spring's to push a horizontal steel rod over the notch of the blade & there's one other bar built into the frame of the knife to keep the blade from folding the other direction but that's it. I'm not saying the "AXIS" lock is a poor design , on the contrary I think they are one of the best locks out in the market today , the action is super smooth plus ambidextrous , it's incredibly strong & locks up with zero blade play. The omega spring's are the only aspect of the design that's suspect & that's only if they fail. I've yet to have an omega spring break on me. Personally the Ball Bearing lock is my favorite with the "AXIS" / lock bar lock coming in a close second. I just picked up the SOG Seal XR. The new SOG XR lock is supposed to be rated at 2,000lbs & is said to give the tri-ad lock a run for it's money. That's a bold statement to make from SOG , I'm going to put this knife to the test & see for myself !
@pharmagator4 жыл бұрын
I've carried a Spyderco Military (liner-lock) for over 20 years... Never close to anything like a locking failure... And this is coming from a certified "cardboard warrior"
@davidcooper67046 күн бұрын
Any thoughts on a Palanquilla lock?
@ColinNew-pf5ix5 ай бұрын
Can anyone (or Nick) recommend a strong folding knife (mechanism) for bushcraft/survival. Not for batoning with, but general outdoor activities which is quite hardy.
@user-wr6wo6vr8r4 жыл бұрын
The Benchmade Axis Lock is the best ever created, and only theirs not all the other copies from other brands
@Dropship113 жыл бұрын
Look I get that Nick and his fans don't like Cold Steel because they like pretty rather than utilitarian. Totally fine. Everyone has their preference. But am I the only one that notices that he spoke for way longer and acted like the Spyderco Compression lock was the most amazing thing in the world when in reality it's just a liner lock that's been moved to the back with an extra pin? Like everyone has biases, but dang man. Make it a bit less obvious when you cream yourself everytime you see a Spyderco.
@richardloo15237 ай бұрын
Not to crazy about folders, I'll stick to my fixed blades. For EDC .
@travismoore31464 жыл бұрын
Great video, per usual! You forgot to mention ball bearing locks like what is found on the Manix II, though.
@monkeyfaceII4 жыл бұрын
Travis Moore pretty similar to an axis lock to just different spring and uses a ball instead of a bar
@bohakkennes12883 жыл бұрын
I only need the lock to hold the pressure of my thumb pushing on the back of it
@gunfun77724 жыл бұрын
I have designed an actual bolster lock and I hope I can bring out some knives with WE knives soon
@runrin_4 жыл бұрын
whens that deadbolt review coming?
@pauldayton52853 жыл бұрын
Are you talking about CRKT Deadbolt lock? I'd like to see what's the strength on that lock too!
@barrybogart54364 жыл бұрын
Then there is the Ron Lake tab back lock which solves the problem of some knives (iIm thinking from Fox) that have a back unlock action which has too much travel and/or is too stiff so the knife is too difficult to UNlock.
@xxcaseyxxc4 жыл бұрын
Great video man information overload as usual lol
@reasonablenamehere4 жыл бұрын
This is a remake of the first Shabazz video I ever watched. At least this one doesn't have photorealistic lions.
@motomissle4 жыл бұрын
Cold steel triad
@tacklecentralfishing10514 жыл бұрын
Hey Nick, when are we getting the opinel no. 13 review?
@monkeyfaceII4 жыл бұрын
Tacklecentral Fishing Folding machete haha
@tacklecentralfishing10514 жыл бұрын
@@monkeyfaceII I can't wait for him to call it a small knife.
@greatestcait4 жыл бұрын
*Any* folding knife? I'm sure a certain USA designed hunting knife would love to make a comeback. You know, the green one...
@funghiman84924 жыл бұрын
I haven't touched any of the more recent Ball Bearing Lock iterations (e.g. Tusk, Q Ball, D'Allara, albeit their implementation of the lock is almost identical to Dodo), but aside from lock strength, the ones on the Manix line as well as P'Kal haven't been the most comfortable to operate (Dodo is slightly better as the ceramic/steel ball is way less rough than the polymer cage). Handling wise, compression lock, axis lock and SOG's XR lock are still superior. Speaking of which, it would be nice if Spyderco somehow brings the Bolt Action Lock back... (glimpse at my Sage 3
@dobi2big4 жыл бұрын
Okabi knife!
@ben9and1-3rd4 жыл бұрын
I've got a Geber Paul 2PW with an axial lock. Would that be similar to the deadbolt?
@kingry19853 жыл бұрын
Came to start learning about knives ... stayed for the lesson voiced by bugs bunny