I finished all of the edge pairs before realizing I had the red and orange on the wrong side 😑
@nochannelhereerror40483 жыл бұрын
Blake The_Goat445 oof
@eddculleiton95313 жыл бұрын
Same
@bromangaming69823 жыл бұрын
I've felt your pain
@pizzapython3 жыл бұрын
Imagine
@gurt19733 жыл бұрын
i read this comment before i almost did the same
@Dreamhole4 жыл бұрын
Who else felt a huge accomplishment after solving the center pieces
@nicnapier4 жыл бұрын
👍
@helloguys1244 жыл бұрын
Me
@killvxhx-rz8dj4 жыл бұрын
Dream me
@gmcmim14 жыл бұрын
Me.
@vidcapper14 жыл бұрын
I did the first time, but now it's like meh. :)
@Viralfanatics3 жыл бұрын
12:36 - Flip alg 14:45 - Oll alg 16:10 - Pll alg
@pugplayer24143 жыл бұрын
I learned in less then 45 mins
@Dabibiboi082 жыл бұрын
Thanks😀
@butterscotch_animator16452 жыл бұрын
This is help full but its kinds funny how they put a translate to english even tho it is
@binhtranvanbinh60623 ай бұрын
@@pugplayer2414 👨🏻💻🇻🇳
@jeffnarum13732 жыл бұрын
:50 centers 7:50 pair edges 11:13 last pairs 13:00 solve
@azoulay7487 Жыл бұрын
U probably won’t read it because it’s been 4 years since u uploaded this video but if u do I just wanna let u know that u explaining really good but sometimes u be moving too fast and don’t show the other cases and it’s hard to understand like that but apart of that u really good thanks ☺️
@VyLnnz Жыл бұрын
no way after 4 years you still lookin sussy email
@cc.4fun Жыл бұрын
You can change the speed of the video to 0.5x 😢 for the complex algorithm’s
@hdschlessingerАй бұрын
@@cc.4fun facts
@sharolynneholtz62073 жыл бұрын
9:55 you didn't explain how I'm supposed to get the last set in place without inserting another pair of solved pieces without ruining them and having to start all over.
@joshuagoodwin19023 жыл бұрын
i think R U R prim
@sharolynneholtz62073 жыл бұрын
@@joshuagoodwin1902 Thank you, but he actually did and I feel like an idiot because after watching it again a couple times it made sense. Seriously an idiot moment lol
@sharolynneholtz62073 жыл бұрын
@dumedume269 Thank you but I already figured it out beforehand lol
@ihminen58383 жыл бұрын
Yep
@PawpleDragon3 жыл бұрын
Time Stamps mine still doesn't work
@edytadziadosz94994 жыл бұрын
Your the best I learned in 7 days now I can impress my friends
@Muddymanny4 жыл бұрын
Edyta Dziadosz hi
@AjayGupta-yp8jk4 жыл бұрын
Do not brag
@DakarEuro3 жыл бұрын
8:40
@milodavis1893 жыл бұрын
@@AjayGupta-yp8jk how is that bragging
@shaftzfn97643 жыл бұрын
@@milodavis189 he is the guppta you cannot argue with the Gupta!
@saimejaz3073 Жыл бұрын
Thank you you made me solve my first 4x4 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉 thank you 🙏 and you are the best sweetest man I’ve ever seen in my lifetime 😊
@garymutunga3187 Жыл бұрын
Chill....It's just a cube dude😂
@feichen99 Жыл бұрын
How did you even do that it’s impossible😢😢
@hopeambrose5965 Жыл бұрын
Is ur dad missing?
@chezborgorr Жыл бұрын
I tried another tutorial once, and it was longer, too quick, and I didn’t understand it. This tutorial managed to be more simple and shorter, and I learned now to solve a 4x4 SO easily with this tutorial! This was a blessing. Thank you so much!
@BinayaRai-lh1hz8 ай бұрын
How the hell did he solved those 3 layers😒😒 thats the problem for which im jumping to one video to another but all of them does it quickly without explaining 😑
I’m not sure if you have a link to the video but I just wanted to let you know that I am going to be in the
@ashwinimailwar9607 ай бұрын
I don’t know if you know this but I have a friend who is a nurse and she is a nurse at the hospital and she is a doctor and she is a physician and she is a medical assistant and she is a nursing assistant and she is a healthcare professional and she is a very good nurse and she is a very good doctor and she 😂 e is a nurse she
@deedeescharf5995 Жыл бұрын
The flipping algorithm was the KEY for me. I figured out the rest, but that was so helpful and makes sense now. Thank you for making this video!
@12newangels2 жыл бұрын
9:21 What? How did you even get 4 up there, the maximum I can get is 3 because when I try to pair the last one and insert it to the top, i have to kick out a solved one into the middle layer and arrange the centers which ends up ruining the edge. I would like an explanation on how to do this. Edit: Nevermind i figured it out, you have to take out a solved one, rotate and put it back.
@teomandemir8918 Жыл бұрын
can use explain it better please cuz i have the same problem too and didn't understand your solution
@kimnordin6460 Жыл бұрын
@@teomandemir8918 * I assume you have already figured it out* , but as i was also struggling with this if you only have a 3 up 'top' and are trying to get a 4th up: replace an 'old' solved pair by turning up the newly solved pair (you should have 3 solved pairs right now before you turn it back down) Rotate the top layer so the unparied side is changed with the newly assigned pair. Turn back the unparied side to the middle layers. You should now have 4 solved pairs on the top! (finish the middle algorithm) You can now turn the cube and work on the bottom(now top)
@ralfiedalfie Жыл бұрын
Thank you for your practical vids and work for us so we can get wise with the cube. Awesome
@SonixGirl772 жыл бұрын
Best method out of all the 4x4 tutorials out there. Thank you for posting.
@2kleanwiditortega4583 жыл бұрын
mine isn’t working right or i’m doing something wrong. every time i try to move it like a 3x3 on that step my yellow and a nothing color get mixed up
@liveyourlifehappily97694 жыл бұрын
Ok I made the red center and when I try and work on another center I always end up messing up the red center 😞
@themangocat_7293 жыл бұрын
Try to make the first 2 centers you solve next to each other like solve green and orange first or red and blue etc. so you don’t have the center pieces opposite from each other
@GabrexRealm2 жыл бұрын
This is definitely the revenge cube, but with your help, i defeated yet another enemy, thank you.
@noahknapper5543 жыл бұрын
thank you my 4x4 has been scrambled and in a corner for 3 months and I finally learned how to solve it
@ensmatter16602 жыл бұрын
Mine has been scrambled for over 5 years
@EditzForLater Жыл бұрын
Same LoL😊
@karmatake2 жыл бұрын
Thank you for your simple and helpful tutorial. Took me an hour to solve for the first time following your guide. Maybe would had been faster had I not hit the OLL parity and screw up the algorithm and redo again the center pieces. Without knowing how to solve the 3x3, I don't think a beginner would know how to solve a 4x4. Anyway I had subscirbe to your channel. Keep up the good work Nic! 👍
@nicnapier2 жыл бұрын
Thank you so much!
@adamactuallyexists2 жыл бұрын
hey nic, im stuck on the last 4 edges to pair i either get them in different places or some other cases i cant explain for some reason is there anything i can do?
@PootrickAnimations2 жыл бұрын
This was so helpful! Tysm!! Ill just learn the algorithm's you earned yourself a view a like and a subscriber
@bioowl2893 Жыл бұрын
Years later and your simple explanation has helped me solve it after an afternoon of agony
@sermadz34424 жыл бұрын
I already knew how to solve a 3 by 3 so when i tried to solve a 4 by 4 i just had the yellow side left and got confused
@jonahrios82422 жыл бұрын
I did the center prices intuitively, but I got stuck on getting all the edges paired
@rohineeramjutton80682 жыл бұрын
Same
@daredturtle4217 Жыл бұрын
same
@dotjebu6237 Жыл бұрын
Same
@summerhosking-jr4rg Жыл бұрын
Same how did he get all the fandoms from the yellow centre?
@superkamispiritguru5576 Жыл бұрын
i’ve got the first 3 layers down but for whatever reason i don’t end up with a “parity”. my 2 center edge yellows or flipped. ones up ones down
@coolcubing29132 жыл бұрын
Hey nic I have a case of two Edges swap in a smal L shape I don’t know what to do
@ShiningWizard242343 жыл бұрын
Its so satisfying solving a 4x4 like a 3x3
@Snoo292932 жыл бұрын
Seems challenging, I wish I had a 4x4 cube to practice with, for now I guess I should try practicing with a regular 3x3 cube
@waterwayx2 ай бұрын
3x3 is ez im 11 and i do it in like 44 seconds best
@ihate_fromjacobblxbrg65743 жыл бұрын
2 of my corners are switched and I dont know if that is possible.
@nicnapier3 жыл бұрын
PLL parity algorithm should fix it. Then you just solve it like normal
@salguodthegreat33174 жыл бұрын
What do u do if u have a problem with the last yellow corners like if u keep solving the the cube but then the corners don’t line up
@masterop46872 жыл бұрын
I’m late. Your centers are screwed up. Color Scheme is Blue Orange Green Red with White on the Left side
@blankface9115 ай бұрын
@@masterop4687I'm in the same situation but my colors are correct. I'm unsure how to solve. I've matched my cube to look just like his in the video and I can't seem to pair my corners for the last step before the solve. Any advice?
@masterop46875 ай бұрын
Try twisting corners and redoing it maybe the backside of your cube is wrong.@@blankface911
@Eguy093 жыл бұрын
When solving the last random edge I don’t know how to do the last on. Can someone tell me how
@gametown47122 жыл бұрын
Same
@stefanmihalka38362 жыл бұрын
same
@DheersDen3 жыл бұрын
I easily learned it thank you
@hannesrootalu36912 жыл бұрын
I knew hiw to but 3×3 and that was a flex but now I can but 4×4 is even bigger flex. Thank you so much.
@ahteshamurrahim8266 Жыл бұрын
After pairing I solve it like a 3x3 till the end.. but I'm left with two corners of yellow, which should swipe each other. Can you help with this?
@Some_bruh Жыл бұрын
I have the same problem
@erosley4 жыл бұрын
This is the third youtuber i found when i was trying to solve my 4x4 cube, but the result is the same. I complete the white centre I try complete the yellow centre, but somehow the yellow centre ends up next to the white one, not opposite. PLZ HELP ME.
@nicnapier4 жыл бұрын
On the 4x4 you can build the centers on any face you want. That is why it is important to make sure that you are placing them in the correct position according to the Rubik’s cube color scheme. If you hold your white center on bottom, yellow in front, you have to move the yellow to the top layer. You do this by doing this: turn the right 2 layers of the cube clockwise, top side twice, right layers counterclockwise. Then do: left 2 layers counterclockwise, top side twice, left 2 layers clockwise. This should move the yellow center to the top position. Use another cube as a guide for where to build the remaining centers, as you could place them in the wrong place on a 4x4. Hope this works for you. 👍
@amritagupta19874 жыл бұрын
You need to try a few times. But I got it in the first time Just keep trying
@timonbirchler3972 Жыл бұрын
Hey buddy, thank you for helping us! I was able to solve most of the cube but not quite all because i was left with two corners being swapped and idk how to replace them :/
@jasperlippens8285 Жыл бұрын
I had the same thing, found a solution yet?
@timonbirchler3972 Жыл бұрын
@@jasperlippens8285 Jup, there is Tutorial For 4x4 cornerswitching Or so
@timonbirchler3972 Жыл бұрын
@@jasperlippens8285 it is called "last two corners parity change" or so, by the "cube solving hero"
@ufologam3r6672 жыл бұрын
Thank you very much for the tutorial, it helped me so much especialy in that long parity algorithm
@huntermcmullin25973 жыл бұрын
when i tried oll after i did the long alg my corners are completely messed up.. anyway to fix this?
@nerdcozzy71724 жыл бұрын
Thank you!
@AdamRadz9544 жыл бұрын
when i do the white cross after I go to step make white side with one layer it never solves the layer
@nicnapier4 жыл бұрын
you probably have the centers in the wrong position. look at a solved puzzle and make sure that you placed the 4x4 centers in the correct position.
@ratsalad7954 жыл бұрын
I can not get my pairs all together ?? Like either they split a pair or they ruin a center and I can’t put it into a different layer without pulling another pair into it??
@nicnapier4 жыл бұрын
If you have 8 edges solved then you are on the last 4 edges stage. You need to insert one of the solved ones into the middle layer so that one of the unsolved ones are in the top layer. Now you have one pair of random edges that you can use to make another pair.
@hew_wo51883 жыл бұрын
him:bla bla bla and there you go solved! (me trying in the background) me: (brain explode)
@nathanielhardman27302 жыл бұрын
Hey Nic, when I learned the 3x3, I learned to get the yellow cross on the final side, then get each corner into the right position using the "lefty" algorithm, then orient the corners using the "right-left 180 algorithm". All the tutorials I'm seeing for the 4x4 use a different 3x3 method - where you solve the entire yellow face and THEN solve the third row. I'd like to stick with the method I know from the 3x3, but the "lefty" algorithm isn't working to get the corners into the right position. I always have 2 or 0 corners right, no matter how many times I do the lefty. Are you familiar with this method? And/or do you know an algorithm that will swap the corners?
@nicnapier2 жыл бұрын
Yes I know the method you are talking about. That is the beginners method. The one I showed is called CFOP. The issue you are having is called parity. You need to do the PLL parity algorithm and it will fix your corner problem. 👍
@cloakingfire7259 Жыл бұрын
Nerds🤓
@DINO221BG Жыл бұрын
@@cloakingfire7259why are you here then?
@legobot Жыл бұрын
Thank you I had the same problem
@mikaylakingston Жыл бұрын
@@cloakingfire7259 shut up at least we try to do something good unlike you
@dogpoundgamingchannel78634 жыл бұрын
0:07 Rubik's Tesseract
@keiganclarke397 Жыл бұрын
This helped so much, thank you😁
@vineshsandhala9384 Жыл бұрын
Jskeke
@NUFC5142 жыл бұрын
Thank u so much I tried several other tutorials and I couldn’t get it that was until I found your video
@hatrickcubers30942 жыл бұрын
I am really struggling on the edge pairing with the last 4 edges
@munmunsatpathy56184 жыл бұрын
What if once you solved for all the edges and now you can begin to do it as a 3x3 cube, you face a problem where when you finish doing the white cross along with the second layer of edges, you come up to where the bottom corners are switched In Colors.( when you have the white facing down)?Is there any way to fix this?( this problem comes before the yellow cross problem where you told that it was going to be a long algorithm).
@nicnapier4 жыл бұрын
Get your 3x3 and use it as a reference to check and see if you solved the 4x4 centers in the correct position with each center in the right place. That is likely your problem.
@munmunsatpathy56184 жыл бұрын
Ok thx!
@munmunsatpathy56184 жыл бұрын
Ok 👍
@Freeedy3 жыл бұрын
Excellent video, thank you 🙏
@Beemo-CR2 жыл бұрын
Ive gotten to where i have 4 solved edges one one face and 3 solved edges on the other, but everytime i try make the last solved edge and move it into place i cant do it without breaking the centres.. any tips?
@tobiashansenbeite7663 Жыл бұрын
Did you figure it out?
@LillyEmilie3 жыл бұрын
how do you solve the last egde pice on the second side? I have all of them in the right slice on the white sied, but when I try to make 2 and 2 on the yellow side the last one dosn't quite come together since I don't have any "random" edges to replace them with
@Pitogiros163 жыл бұрын
I don't know if you're going to answer but i hope you do. So my cube had all the yellow edges and corners right except the Yellow/red/blue and the Yellow/orange/ blue corners were on each other's places. What algorithm do i have to do? If you need more explanation just tell me because i am a beginner at the 4×4
@nicnapier3 жыл бұрын
This is PLL parity. Do the algorithm for PLL parity and then solve the cube like normal. 👍
@Pitogiros163 жыл бұрын
@@nicnapier Ohh thank you!!! Anyway have good day.
@nicnapier3 жыл бұрын
You too😁
@jpmPodcasts Жыл бұрын
In the bars part no matter what I do I always have on the white side or yellow side and unsloved bar any help with that?
@yousefehab738511 ай бұрын
Same
@StumbleWxrly2 жыл бұрын
I got the cross and the fist two layers done then I don the yellow cross and that but in the end there were two right corner pieces and two wrong corner pieces, what do I do
@phillyphill68713 жыл бұрын
Awesome tutorials. I’m a beginner and I am a bit confused. I get the logic with it but when you’re saying to do a U2, do you mean U’2? I had thought U was moving the top layer clockwise when viewed from above but you’re saying U2 while moving it anti clockwise with your left hand
@nicnapier3 жыл бұрын
Thanks for watching. A U2 on a 3x3 is the same if you do it clockwise or counterclockwise, they are both turning the top layer 180 degrees. You can decide which direction you like the best
@phillyphill68713 жыл бұрын
@@nicnapier thanks for the answer. I feel like an idiot for not realising that haha
@nicnapier3 жыл бұрын
It’s all good. Cheers👍
@isaacstowers73794 жыл бұрын
My cube has the f3l solved and the top layer doesn't have the edges matched correctly (f.e. I have a blue edge solved but on another I have a green one and an orange one matched up)
@nicnapier4 жыл бұрын
You need to treat them just like in the edge pairing stage. Pair the edges up one after another until you have both edge pieces with the correct partner.
@mlaird9404 Жыл бұрын
I don't know if it's a me problem or this cube but every time I solve the second step. Instead of having yellow and white parallel, it's right next to each other and I don't know how to fix it. Maybe the colours are different on my cube
@eegoistt4 жыл бұрын
How do you do the f2l part like I can't combine all 3 edges
@gen_eclipse64094 жыл бұрын
Viper same
@freaky_2509 Жыл бұрын
Thanks a ton! You helped me a lot at the final stage. I was stuck there for long and couldn't find the solution. You are great!
@tamilcinemas38183 жыл бұрын
Thank u soooooooooooooooooooooooooooooo much i solved it within half an hour ❤ U r the best
@jangugerell8084 Жыл бұрын
i have no ides how but i ended up almost solving it to the point where there are two corners right.....but i dont know what to do now. normally on the 3x3 only one is right and then all of them.
@alexshare7043 Жыл бұрын
So ive got the edges paired on white and 3 out of four on the yellow, how do I get the last pair in without taking a pair out?
@shawnstarr Жыл бұрын
Same issue here. I don't get it and he doesn't show how.
@bradybadboy62294 жыл бұрын
I use beginners method for solving like 3x3 part and I always end up with 2 corners solved after the yellow cross and matching up the colors
@nicnapier4 жыл бұрын
That means that you have PLL parity. Here is a video that shows how to solve it: kzfaq.info/get/bejne/ocyeidGr3K6znqc.html
@sharky27283 жыл бұрын
thanks so much it realy helped me
@XxDylane_NixX2 жыл бұрын
i am wathing your video over and over again . and i got to say your very good at teaching rubik cube. and i also watch your other video and i really like them . keep on the good work dude . and in the futere who knows u might be a famouse rubik cube teacher in the world xD
@andrija5954 Жыл бұрын
Nice explaining but I can't get all 4 edges paired on top and bottom without messing the other ones edges so I can't get 4 on both sides, do you know why or how I can fix it? nvm i got it
@leobello1034 жыл бұрын
I watched it once and learned how to solve it thank u
@gen_eclipse64094 жыл бұрын
When I did this the last 3 yellow corners were mixed up
@mylesedwards1334 жыл бұрын
That's called parity I believe
@gnomeaggeddon56143 жыл бұрын
You have to reassemble the cube Break it apart and then rebuild it
@imyea55533 жыл бұрын
I have all the edges paired but my red and orange aren't paired any longer help me please
@suriyanjansuthiwong2882 жыл бұрын
I have some trouble, being struggle at the top 2 corners. Could you help where i have missed?
@dashkymcell26646 жыл бұрын
Thanks!
@nicnapier6 жыл бұрын
You’re welcome 😁👍
@vewayy4 жыл бұрын
HyperCube 10:10 wtf i’m stuck with 2 left and you didn’t clarify how to fix that help plz
@nicnapier4 жыл бұрын
Go to the time: 12:21. I show how to solve the 2 edges case there.
@calebmckenna2734 жыл бұрын
Broke my cube watching this
@nicnapier4 жыл бұрын
kzfaq.info/get/bejne/ac13ZKeetLG8n6c.html
@ShiningWizard242343 жыл бұрын
RIP
@dppraba2314 Жыл бұрын
Can i make the white side only and get the center from there?
@jesrieldevera7196 Жыл бұрын
Finally after rewinding the video for countless time I finally solve it !!!!!! Thank u my guy!!!
@dannygo7873 жыл бұрын
This guy is the best I learned in like 1 hour
@bromangaming69823 жыл бұрын
Tell me how I'm getting so confused
@vybzcubing72723 жыл бұрын
How!!!??
@pie47193 жыл бұрын
I learnt it the first time through
@shaftzfn97643 жыл бұрын
@@pie4719 i learned the -1st time
@piggyparker7923 жыл бұрын
Amazing video 👍🏻 It’s super helpful and real easy to solve the 4x4... I will continue to share positive things about your video! Just make sure to keep up the good work!
@itzmathdev433 Жыл бұрын
when you get to the part when the 4 by 4 turns into a 3 by 3. Can you use the beginner method of a 3 by 3 to solve the 4 by 4?
@anniedominguez930710 ай бұрын
Yes
@villel7864 Жыл бұрын
I have 7 edges done but can't figure out how to make an eight one without messing up one of those 7 or a center
@willreis64954 жыл бұрын
I got 4 edges paired on one side but only 3 in the other. How do I get the last pair matched?
@nicnapier4 жыл бұрын
You need to have 2 edges on the same layer then 1 on the top layer. When you slice the one pair over to match 2 pieces then u insert the top pair then slice back.
@willreis64954 жыл бұрын
Thanks!
@DanielBennett4 жыл бұрын
THAT NEEDED TO BE IN THE VIDEO
@project14823 жыл бұрын
"I wont show you the whole cube but I'll show you the basics" The whole point is to show the entirety of possibilities 😑
@nicnapier3 жыл бұрын
Well it’s kind of hard to show 7401196841564901869874 093974498574336000000000 possible combinations.
@project14823 жыл бұрын
@@nicnapier Your problem not mine
@lolssmuncher39763 жыл бұрын
@@project1482 what.
@Hanna-mz3mp3 жыл бұрын
@@project1482 Jesus Christ mate
@eljask3 жыл бұрын
@@project1482 alpha mentality😂
@frankvaldez2769 Жыл бұрын
On the OLL to do yellow cross, you're turning the U2 prime and you do not have it showing on the screen as prime. Am I right or am I reading the algorithm wrong????
@ernestguevara596811 ай бұрын
That long algo at the end, made my cube scrambled again 😅😅
@thedancingbluejay8404 жыл бұрын
I don't know oll or pll, i use f2l and the begginers method :(
@nicnapier4 жыл бұрын
That is perfectly fine. Whatever method you use for the 3x3 will work.
@basketball81584 жыл бұрын
HyperCube it not work
@willscheele79394 жыл бұрын
B A S K E T B A L L you might have a parity
@basketball81584 жыл бұрын
DragonGetLost yes I did thx
@harinikulkarni98594 жыл бұрын
I learned in one night. Thanks bro👍
@ShiningWizard242343 жыл бұрын
Same
@ShiningWizard242343 жыл бұрын
@AcornAlpha set up the pairs so they are adjacent from each other. Then do TU if you know what that is then do Y turn the whole cube to your left. When your finish that you do this algorithm (RUR')FR'F'R TU' then your done.
@nordonampa67993 жыл бұрын
I had that part where the two solved ones were next to each other and the tho "unsolved" ones were next to each other and you said to do the same method ( from the last one ) but it didn't work...
@4ouR6iX4 жыл бұрын
So I have 7 pairs in place, 4 on bottom and 3 on top but how do I put the final pair in the top without bringing another one down?
@nicnapier4 жыл бұрын
Xuqar when you have the 8th pair made, you position the 3 solved edges on top so that when you move the 8th edge up, it kicks one of the 3 backwards then you insert the other random edge that was on the top layer. Hope this helps, cheers
@gymjamthejauntyclub97534 жыл бұрын
The algorithm for three edge case is very difficult
@dynamicunknow-n36824 жыл бұрын
He says to do something and then he turns like 50 time without explaining anything
@phase04004 жыл бұрын
ikr i think we have to learn a 3 by 3 sequence its cinfusing
@shankarsanil47334 жыл бұрын
@@phase0400 no he is not explaining clearly i know to solve 3*3,2*2,mirror ,pyraminx,and,sqweb but i cant understand this video
@phase04004 жыл бұрын
@@shankarsanil4733 ive learned 3 by 3 easily. The bit for 3 by 3 is actually easy. (Only the freakin corner parity that somehow i managed to get past). On the corner parity u have to try and get the whites on one side and the yellow on the other. Then solve it by putting the corners in right place (on both sides). Then solve it on both sides. Hope this makes sense
@ingomeulendijks90452 ай бұрын
Settings on youtube, slow speed 0,25.
@Hockey_guy_172 жыл бұрын
You are a legend, thank you very much
@sparkingcosmics92553 жыл бұрын
I cant get the last paired edge into the white, any algorithm?
@adarybicki35273 жыл бұрын
thanks you helped me solve my 4x4
@user-wu8wl8nq4m3 жыл бұрын
Learned how to solve a 3x3 a month ago and am learning the 4x4 rn thank you man I’m halfway there
@grim_reaper42113 жыл бұрын
For some reason all the algs I’m trying to use on my cube doesn’t do anything like I’m applying all the algs in the right spot but nothing happens for the last layer
@ellamarieellamil82232 жыл бұрын
I can't solve the yellow side. Whatever algorithm I use I never get a cross or a fish. What should I do?
@nicnapier2 жыл бұрын
You probably have OLL parity. If you have 1 or 3 yellow edges correct, you will have to do the parity algorithm.
@NikeBusRed3 жыл бұрын
At around 10:28 in the video , they are in line and instead of doing his algorith you could just do R' U F' It works for me
@hanifsendmeamessageingmail3453 жыл бұрын
Arsenal 👋🙅
@hanifsendmeamessageingmail3453 жыл бұрын
Arsenal 👋🙅
@toxicalgameknight99983 жыл бұрын
I learnt the 4x4 in 40 mins , and I can flex to my friends now! Thx Hyper Cube ! I will keep supporting u !
@jolelucic4953 жыл бұрын
how tf u did it in 40 mins im still in process and its 5 hours now!!!
@widscience23733 жыл бұрын
try this challenge now : kzfaq.infoNSZu4jTyHEE?feature=share
@Jhonkanator3 жыл бұрын
all the other videos I tryed didnt work then i did yours and it worked thank you so much!!!! ;)
@falconplayz67912 жыл бұрын
When I am gonna solve the edges I got no places 1 place left on the top, I put it there, but when I am gonna go back down again and fix the center i just take another edge with me and then it gets ruined.
@falconplayz67912 жыл бұрын
Nvm I found out that I don't always need to take the edges on top or bottom when I am done, I can just do the others and when I am done get then up and at the bottom.
@alexisdacquay64203 жыл бұрын
i can't get the last algorithm, i just messed up my whole cube, way too fast
@colombiano0505 Жыл бұрын
bro he didnt put other scenarios
@sadafwajid965011 күн бұрын
Tell me about it
@pizzatime1237 Жыл бұрын
THANK YOUUU jperm made no sense but u helped me so much
@dudemusicofficial Жыл бұрын
That's why i came here 😂 jperms tutorial is so bad