Nilight Truck Bed Light LED Strips DIY Installation onto 3rd Gen Toyota Tacoma

No video

Nilight Truck Bed Light LED Strips DIY Installation onto 3rd Gen Toyota Tacoma | Mod #58

Рет қаралды 10,106

Күн бұрын

This video is a step by step installation of Nilight LED truck bed lights onto a 2019 Toyota Tacoma TRD Pro.
Product Link:
www.amazon.ca/...
NOTE: The 60" option is about 6" longer than the installation surface on a 5' Tacoma bed.
Thanks for tuning in and until the next video!
Alex (modXELA) Calpito
Best LED lights, Bright LED lights, LED lights, high quality LED lights
DISCLAIMER
I do not endorse nor am I compensated by the companies of the products that I install or the tools that I use. The sole purpose of my videos is to show you my installation approach and share ideas that I have. I am not a professional or an expert in these subject matters but rather, just self-taught. The information that I share in my videos are from my personal experiences and personal opinions, researched materials from manuals or internet documents, and from blogs or forums that may not be 100% accurate. Please do your own diligence to ensure correct product fitment when purchasing via any links that I may provide by verifying with manufacturer or dealer. I am not responsible for information provided here that may cause any damages or financial loss. Changes, omissions or additions maybe performed without notification and I reserve the right to make these changes without notice or obligation.

Пікірлер: 25

@vr812 Жыл бұрын

Nice! I wished you showed how and where you ran the wires that connect to the battery.

@modXELA Жыл бұрын

Hey thanks vr812. I will do another video on that. It was very cold at the time of the install so it was hard to do the video recording while installing at the same time. As mentioned, I will rewire and relocate the switch so that will be a part of the next video. Unfortunately, it's now winter with sub-zero temps so this project will have to wait til the early spring. =( stay tuned and thanks for tuning in!

@jimf.625 Жыл бұрын

As a new 2023 TRD Off Road owner I stumbled across your channel looking for Billie Bar reviews. Great video by the way. Checked out your other videos and realized I pretty much want to do everything you are doing to your truck. Very similar tastes with your mods. Immediately subbed. Can't wait to see your next mod.

@modXELA Жыл бұрын

Hi Jim, congratulations on your new truck and I appreciate you for subscribing! I do have more mods/installs lined up but I tend to slow down during winter time for obvious reasons but please check my channel out from time to time. Will be posting something that you might be interested in within a week or so so stay tuned! thanks again and happy trucking! =)

@pssthoy8873 Жыл бұрын

This looks like a very useful install and affordable too. Will definitely do this... thanks modxela!

@billy-jadeachiu2296 Жыл бұрын

Looks great I'm sure it'll be a great asset for your everyday and off roading have a great holiday season be safe and stay warm

@modXELA Жыл бұрын

Hey thanks old friend... enjoy the holidays as well and stay safe!

@AoSC.Arbiter 5 ай бұрын

Please show the actual wiring from the battery and how you routed it.

@modXELA 5 ай бұрын

Sure, if weather cooperates this weekend, I'll put together a quick video for you.

@MillerV2 Жыл бұрын

I just got these lights and super excited to use them. I’m having trouble trying to hide the wires as best as possible without punching a bunch of holes in my 2019 Tacoma. Looking forward for your response!

@modXELA Жыл бұрын

Hey TheInsanePker, i wouldn't drill holes (ouch). I used Zip Tie Adhesive-Backed Mounts available on Amazon. Thanks for tuning in and I hope to see you again!

@Skylyned 5 ай бұрын

Constant jump cuts are distracting

@teabee44 Ай бұрын

How are they holding up 1½ years later?

@modXELA Ай бұрын

@@teabee44 still works like it’s brand new! One of my most useful mods.

@teabee44 Ай бұрын

@@modXELA glad to hear. I'll be buying a set now, thanks.

@modXELA Ай бұрын

@@teabee44 one thing that I ended up doing is I installed the switch in the back of the bed close to the driver side tail light. Works well for me. Anyway good luck with your install and thanks for tuning in and supporting my channel!

@teabee44 Ай бұрын

@@modXELA you're welcome, I was thinking about deleting the switch and locate the relay under the rear seat so my power from the bat will be as short as possible. My bed is lined with line-x so I'm guessing I'll have to mount it with hangers as I doubt the tape will stick long term, and we've been in the triple digits and I'm sure the adhesive isn't going to do too well by the end of summer.

@ASMRWandering 8 ай бұрын

What lower led strip are you using below your tailgate that light up while when backing up? That looked really nice!

@modXELA 8 ай бұрын

Here’s the link to that installation and the product link is in the description… kzfaq.info/get/bejne/oaenlayXv5nbnXk.htmlsi=syvgOEehMlasr5PI

@a1fixitguy309 20 күн бұрын

Hello friend...how many watts?

@modXELA 19 күн бұрын

Hey there... unfortunately, this is not specified on either the product website or on the actual product packaging. My best guess based on the lumens (3600), it will be between 12-15 watts per LED strip. This comes in 3 strips but I decided to only install 2 strips. I hope this helps my friend and thanks for supporting my channel.

@epaul1967 Жыл бұрын

Is the anyway to tap into the 120v plug in the bed instead of going to the battery?

@modXELA Жыл бұрын

That's a good thought and I'm sure there's a way but my guess is you will have to tap into it before the inverter and I would imagine that it's located somewhere in the engine bay area so no advantage as far as I can imagine.