Ninebot G30 Max SOLID TIRE - How to mount a puncture proof tyre on the front wheel?

Рет қаралды 21,664

Жыл бұрын

🛒 ✅How to mount a solid tyre on the front wheel of a Ninebot G30 Max electric scooter? In this tutorial, we show you the method we use at MoovMoov to do this installation.
There are two main steps:
How to remove the original 60/70-6.5 tubeless tyre?
How to fit a solid tyre on your Ninebot G30 Max?
There are different models of Ninebot KickScooter Powered By Segway: Max G30 - Max G30P - Max G30LP - G30D - MAX G30E II - MAX G30LE II - Etc.
All these references of G30 scooters have the same wheels and you can follow this tutorial without any problem.
We know that this is not an easy job. We hope you will find this video useful. Feel free to tell us if you succeeded in the comments, it's always nice to get your feedback (positive or negative) 💚🛴🔧💪 The MoovMoov Team.
⬇️ If there is a product in this tutorial that you need, check out the purchase links below:
For our American friends (amazon.com🇺🇸)
🛒 ✅ Solid Tire for Ninebot G30 : pixelfy.me/pGlW24
For our friends in the United Kingdom (amazon.co.uk🇬🇧)
🛒 ✅ Solid Tyre for Ninebot G30 : pixelfy.me/LaZFap
🛒 ✅ Hercules Tyre Levers: pixelfy.me/9fEwkH
👉 If you are interested in the repair and maintenance of electric scooters and want to follow our work, then please subscribe to our channel by clicking on this link:
kzfaq.info/love/8tHSfjLkSqbHrFO8HRac5A
-
ℹ️⏱ Below are the main steps in this video for installing a puncture-proof tyre on the front wheel of a Ninebot G30 Max scooter:
00:00 - Intro: Ninebot G30 Max solid tyre assembly (front wheel)
00:34 - Removing the front fork covers
02:49 - Releasing the brake
04:50 - Dismounting the front wheel
05:47 - Taking off the tyre from the rim
09:46 - Removing the old tyre
13:03 - Preparing to mount G30 Max solid tyre
14:17 - Installing puncture proof tyre (phase 1)
17:34 - Fitting the solid tyre on the wheel (phase 1)
19:43 - Installing puncture proof tyre (phase 2)
20:46 - Fitting the solid tyre on the wheel (phase 2)
23:34 - Mounting the front wheel on the scooter
24:27 - Fitting and adjusting the brake
27:40 - Finishing touches

Пікірлер: 23

@moovmoov.global Жыл бұрын

Hi 👋 If there is a product in this tutorial that you need, check out the purchase links below ⬇️ : For our American friends (amazon.com🇺🇸) 🛒 ✅ Solid Tire for Ninebot G30 : pixelfy.me/pGlW24 For our friends in the United Kingdom (amazon.co.uk🇬🇧) 🛒 ✅ Solid Tyre for Ninebot G30 : pixelfy.me/LaZFap 🛒 ✅ Hercules Tyre Levers: pixelfy.me/9fEwkH Good repair 🛴💚

@BigDclips77 4 ай бұрын

De 12:19

@ianross5492 Жыл бұрын

Thanks for a great video

@heyheyheyitsok7125 11 ай бұрын

Omg tysm u helped me finally finish it❤❤❤❤

@TFERGFACE 3 ай бұрын

Instead of putting on the floor and using feet to lock the first bit of the tire into the rim, I found it much easier to use a table mounted vice to do the same thing (use wood to avoid scratching rim with vice). Once the first bit is locked in with the vice, it's not hard to lever the rest on. if you want me to share a video of my method let me know

@JRWilson242 19 күн бұрын

I use this method too when fitting customers solid tyres to their scooters. Works a charm

@jozo438 11 ай бұрын

do you reccomend solid tire for g30 max? is it better to use tubeless with jelly or (witch is hard to find here) or this one?

@StevenMillerManhattan 7 ай бұрын

The ride is a little tougher but definitely Worth it Imo

@daishinkan-8146 Жыл бұрын

👍👍👍👍

@JRWilson242 19 күн бұрын

Solid tyres are great, but do worsen the ride quality, potentially causing fatigue of the scooter frame and components as the scooter will bare all the shocks and vibrations which air filled tyres normally cushion out. They can also reduce the scooters range by around 15% - 25% due to the additional weight and direct strain on the motor. They're quite heavy bits of rubber arent they... They're also prone to flat spots if you brake hard and lock the tyre, where it may grind against the ground. This can cause a bumpier ride. They're also difficult to remove and replace. Worth it to prevent flats, but for me, I prefer to stay with self sealing tubeless tyres.

@jamesmurillo4463 5 ай бұрын

Real easy especially when u weigh 300 lbs 😅

@ledzeppelin175407 9 ай бұрын

Can you also do this to the rear tire as well?

@JRWilson242 19 күн бұрын

Yes

@treysanders4509 11 ай бұрын

Does that take the comfort out of the scooter? I’m just trying to figure if this is something I wanna do. Thanks

@michaelambrus3051 11 ай бұрын

It does, but its worth it because it takes away all the anxiety of punctures and debris on the road. One important thing is to choose a tyre with rounded edges, I made a mistake bying cheap ones that are almost ”flat” resulting in less ability to turn, but I live with that 😂

@JRWilson242 19 күн бұрын

Yes it does, and can reduce your range by 15% - 25% due to the weight and additional strain. It also causes risks to the scooters frame and components as it'll be taking all of the bumps and shocks to the scooter frame, whereas air filled tyres typically take the shock away from the roads. Solid tyres aren't that great. The stock self sealing tyres on this particular scooter are so much better. The ride is more comfortable and they rarely go flat when punctured as the tyre will immediately heal.