Nissan 370Z / Z1 Motorsports DIY Hood Strut install

Рет қаралды 5,080

3 жыл бұрын

In this video, David brought his 370Z back over for a quick vehicle walk around and to install some Z1 Motorsports hood struts. The install was very easy and only required some minor trimming to fit properly!!
Follow David on Instagram:
/ magma_z34
Z1 370Z Hood Struts
www.z1motorsports.com/z1-prod...
The music can be found below:
Island by MBB / mbbofficial
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
Free Download / Stream: bit.ly/Island-MBB
Music promoted by Audio Library • Island - MBB (No Copyr...

Пікірлер: 16

@markamark123 Жыл бұрын

Thank you for posting this video . I was able to install mine under 30 minutes.

@Foxcraze Жыл бұрын

Glad it was helpful!!

@ljjr8236 3 жыл бұрын

Thanks for this showing...I've ordered mine n have them on the way to me

@Foxcraze 3 жыл бұрын

Cool deal man! They are really nice struts.

@NorCal2123 Жыл бұрын

Im removing my battery and my Z came with the z1 hood strut. On the battery side lower ball joint do i just pop it out of place or do I need to loosen the bottom bolt under the wheel well?

@Foxcraze Жыл бұрын

No that shouldn’t be necessary. Take the clip out and remove the strut from the upper ball joint first then just grab the lower part of the strut and lift up and it should just pull right off the lower ball mounted to the wheel well.

@NorCal2123 Жыл бұрын

@@Foxcraze ahh gotcha thanks! didnt know i had to remove the top one first before being able to pop out the bottom one.

@Foxcraze Жыл бұрын

You might not have to remove the top connection first, however the downward pressure on the bottom ball joint with it installed might make removal harder than it needs to be.

@datboybiglou7077 2 жыл бұрын

Where did you guys get the battery and brake fluid covers from?

@Foxcraze 2 жыл бұрын

I skinned those myself. There is a Video of the process in my previous videos.

@Foxcraze 2 жыл бұрын

I skinned those myself. There is a Video of the process in my previous videos.

@ACommenterOnYouTube Жыл бұрын

All 5 of my cars have a clearence issue when i install hood struts .... NONE of the hoods sit perfect after installing them

@Foxcraze Жыл бұрын

Well that’s good to know, my buddy hasn’t had any other issues with them so it was still a good mod none the less.

@ACommenterOnYouTube Жыл бұрын

@@Foxcraze All 5 are made by a different company and all 5 cars are different and all have the same issue. Something about those hood struts not made by the factory have an issue.