Nissan Micra K11 - changing the Ignition Coil

Рет қаралды 52,248

7 жыл бұрын

When the car doesn't start in cold or humid conditions try a hot air blower on the distributor. If the car then starts changing the ignition coil and the capacitor is a good idea. Capacitor is a 2µF/400V type. This is the 1.0l engine CG10DE. Replacement Coil is a ECZ-NS-012 which is also used in the Primera P10/11 and the '91 Mazda 626GE

Пікірлер: 52

@EarlySwerver 2 жыл бұрын

Thanks so much for posting this video. I'm a novice mechanic and following this video, have just come back in from replacing the coil. It started first time after and sounds better than before (might be my imagination). So many hints and tips in the video, I'm sure I wouldn't have been successful without it.

@nikospapadopoulos555 6 жыл бұрын

Mister its a great video and thank you for sharing this !

@nissan300bhp 6 жыл бұрын

thanks for the video, very helpful.

@buyermay2145 6 жыл бұрын

You are great !

@giancarlobagnoli4176 6 жыл бұрын

Thanks MR.....now i know

@alfonsoibanez1934 Жыл бұрын

Muy bien explicado y un excelente video¡¡¡¡¡¡. Geniiaallll¡¡¡¡

@phillipdeleon4397 6 жыл бұрын

thank you. this helped us save Php1000.00

@portelliluc8961 4 жыл бұрын

Merci. Thanks

@sergiomarel6919 4 жыл бұрын

Me encanta el sonido de fondo de los pájaros

@matzetronicsmscho8872 3 жыл бұрын

Sí, mi jardín es un pequeño paraíso

@callidusss 2 жыл бұрын

Why succes this fail in the Ignition coil???? Maybe humidity or cold?¿ Very good video!!!! I hope repair mi Micra, he is having problems with the iginitio when run for few minuts :S

@mixtolife3769 2 ай бұрын

What is the blue part top of distr connecting coil with cable?

@paulwisdom5383 5 жыл бұрын

Awesome video. What were the symptoms? I have a nasty misfire when warm, but compression sounds healthy. I suspect ignition coil as it gets worse the more it's driven, but a few minutes to cool off it'll disappear for a minute or 2. Also, for those who have the budget, a cordless ratchet is a game changer for this job!

@sparty971 2 жыл бұрын

Did you ever fix this problem . It is exactly the same as I have . Missfires when warm. was it the coil in the end ? thanks

@callidusss 2 жыл бұрын

Mi problem its the same!

@paulwisdom5383 2 жыл бұрын

Yes I did! Mine was quite odd. My coolant temperature sensor connector was heavily corroded (its a single spade connector on the passenger side of the engine from memory). I cut it back to clean wire, extended and reconnected it. The problem was corrosion making the resistance readings go out of spec, but heat also increases resistance. Given how bad the connection had got it was reading so far out of spec the ECU just didn't know what to do. Took minutes to fix after weeks of looking for it. Sorry for the late reply!

@Francescos13 2 жыл бұрын

Ecu cooling temp sensor has 2 pin not 1, 1 pin it's for gauge temp

@wurmbunt 5 жыл бұрын

Na, das nenn ich mal hilfreich !! Frage : welche funktion hat die ( nicht beachtete und "very important little spring" ) technische feder zwischen gehäuse und deckel der zündeinheit ? Danke.

@matzetronicsmscho8872 5 жыл бұрын

Sie bildet die elektrische Verbindung zwischen Zündspule und Verteilerdeckel.

@wurmbunt 5 жыл бұрын

OK! Wo bekomme ich diese Schraubenfeder-incl. der Endkappe- ? Ist bei Nissan wohl nicht mehr Lieferbar. Ach ja : Danke für die Information.

@tom-cp5pz 6 жыл бұрын

the connections nearest the coil, you reconnected opposite to how you removed them, will this not make a difference ?

@matzetronicsmscho8872 6 жыл бұрын

Lol, i never noticed that, it obviously doesn't play a role. Car does run for several months now without problems. But now that you mentioned it i think about reseating the cables to their original position. Thanks for watching and your eagle eyes :-)

@mgabrielle2343 Жыл бұрын

@@matzetronicsmscho8872 Reversing the connections to the coil can have an effect something to do with electrode erosion, all to do with material transferring from one electrode to the other, so reversing does the opposite, so you may get deposits on the rotor rather than on the four points, but I won't swear my life on this. It also means the spark polarity reverses, so if previously the polarity of spark was positive with respect to earth, by reversing the spark polarity is now negative, as far as the spark itself is concerned it ignites the petrol mixture so you do not see any difference in engine running.

@MrRichard57000 5 жыл бұрын

do you have oem nummber from that coil???good video....

@matzetronicsmscho8872 5 жыл бұрын

Nissan only sells the whole distributor, so they have no OEM Number for the coil. The replacement is used has the Number 'ECZ-NS-012' and is an NGK part afair.

@MrRichard57000 5 жыл бұрын

@@matzetronicsmscho8872 yes oké thanks for the reply.... Going to try and see if I can find it on the internet.... Thanks!

@romariojunger4054 Жыл бұрын

Boa noite amigo, o 2.º cilindro está com falha de centelha, eu acredito que é na distribuição, pode me ajudar

@S0ulbanish3r 6 жыл бұрын

hey! geiles video! habe nur paar fragen.. mein nissan k11 springt einfach urplötzlich nicht mehr an nachdem ich in geparkt habe. wenn ich den schlüsseldrehe kommt aber dieses normal motor"rödel" geräusch aber der motor springt nicht an.. adac typ hat mit multimeter vieles durchgemessen und meint der zündverteiler bzw die zündspule sei hin. iwie habe ich aber bisschen angst das der mich veräppeln, weil er die zuünkerzen auch gepfrüft hat mit dem multimeter und da nichts zu gesagt hat.. aber ich bin ein laie was weiss ich schon :) mich verunsichert auch das du sagst der wagen sollte anspringen wenn man mit nem fühn auf den verteile hält.. weil als ich geparkt habe war der motor ja noch heiß und das müsste ja dem selben zustand entsprechen wie wenn man mit einem heißföhn draufhält oder? aber ist leider trotzdem nicht angesprungen.... desweiteren habe ich die möglichkeit einfach einen kompletten gebrauchten zündverteiler zu kaufen der funktionstüchtig sien soll, damit würde ich doch das auseinanderbauen einfach umgehen können oder? also einfach alten raus und neuen rein, würde das so einfach gehen? hoffe du hast paar tips für mich dankeee :)

@matzetronicsmscho8872 6 жыл бұрын

First check fuses for ignition, fuel pump, and ECCS. Check Anti-Theft Immobilizer. Check for sound from fuel pump before starting.

@nikospapadopoulos555 6 жыл бұрын

How to check Anti-Theft Immobilizer ?

@matzetronicsmscho8872 6 жыл бұрын

That depends on the type of the NATS system. Until the end of 1995 Nissan installed a makeshift solution which breaks connections to fuel pump, ignition and crankshaft sensor in a small extra box by Lucas. This ATI is operated by a seperate remote control on your keyring. Theres an LED in the console which extinguishes when the car is operable, else it will flash or light. Newer models have an ATI incorporated in the ECCS and the keys and cannot be defeated easily.

@salmanomar5583 5 жыл бұрын

where is extra box plz!

@yusufdogru1602 2 жыл бұрын

Hallo Hattest du den fehler gefunden

@PETERNESS Жыл бұрын

is this distributor the same as a 1.3 engine ,im in australia and parts are hard to locate ,mine only starts if i put a heatgun on the distributor on cold mornings ,thankyou for any help

@matzetronicsmscho8872 Жыл бұрын

It should be the same distributor when you have the older engine before Facelift I did arrive just before the year 2000. Double check if you have thode 4 cables coming out of it. Newer engines have four seperate ignition coils.

@Blablublablubb 6 жыл бұрын

Hi, bin über das Nissan board auf dein Video gekommen. Die Abbildung und Spezifikationen des Kondensators passen nicht mit dem was man im Video sieht. Google hat mir auch nicht weiter helfen können. Kannst du vl. Noch nen link zum Ersatzteil Posten. Wäre dir äußerst dankbar

@matzetronicsmscho8872 6 жыл бұрын

Condenser is a 2µF/400V bipolar. Obtain one anywhere you want but you can try this link: www.pollin.de/p/motorbetriebskondensator-sh-1-7-f-450-v-201008 This works in my car for a year now, although its only a 1.7µF

@matzetronicsmscho8872 6 жыл бұрын

Forgot to say that the condenser in the video was a temporary solution until i got the above part.

@kevken9865 5 ай бұрын

@@matzetronicsmscho8872 my micra has no spark at all. I changed die coil and the finger + cap like in the video. Still not working. How can i check if the condenser is at fault? Can i bypass it and if it sparks, just buy a new condenser?

@kevken9865 5 ай бұрын

Hallo, ich hatte alles in Verteiler ausgetauscht bis auf den Hallgeber da dieser meines Wissens nicht zu kaufen gibt. Jetzt habe ich immernoch keinen Funken. Die spannung kommt aber beim Verteiler an also muss ist es doch wahrscheinlich, dass dieser kaputt ist? Du scheinst mir recht viel Ahnung in der Materie zu haben, könntest du mir helfen und erläutern wie man den Hallgeber durchmessen könnte? Wäre sonst ärgerlich wenn ich einen kompletten Verteiler neu kaufe und die Vermutung doch nicht stimmt :D Vielen dank

@meassavuth4649 Жыл бұрын

Hello every body , I need help , my car starting quickly in the morning,. but after getting Hot or even it is getting hot by sunlight it will be hard start , every morning is ok , the problem is from hot , even the hot of sunlight is also hard start , thank ,

@matzetronicsmscho8872 Жыл бұрын

Can't tell much about the symptons you're encountering, but the Micras have some trouble with the temperature sensor, too. Note that there are 2 sensors where one is for the gauge in the cockpit cluster and the other is for the ECCS. It might be either the distributor or the coolant sensor. Sorry, can't be more specific.Problems with the iginition coil tend to occur more in wet conditions than in dry, hot environments.

@rudireiling9985 3 жыл бұрын

Bist du Automechaniker? Warum zeigst du nicht mehr Videos über die Reparatur vom K11? Gruß Rudi

@matzetronicsmscho8872 3 жыл бұрын

No, i'm not a professional car mechanic but only an amateur when it comes to cars. The reason for not showing more videos on the Micra is that no other failure happened on the car and it ran flawlessly for three more years when rust put an end to its life. I'm now running a 2002 Micra and so far no problems worth mentioning did happen.

@rudireiling9985 3 жыл бұрын

@@matzetronicsmscho8872 Thanks for the answer and i am a traint car mechanic on Audi and Volkswagen,but not on Nissan,we have such a car an it is 25 years old and run and run,sorry for my bad english its long time ago,when i learnt it in School!