No video
Nissan Micra K11 Short Shifter Installation (CGA3DE, CG13DE CG10DE)
Рет қаралды 21,311
Күн бұрын
@0Tekstyla0 11 ай бұрын
More micra stuff please 😉👍
@jacklucas8074 2 жыл бұрын
Does using the zipties stop it from rattling? Also be prepared for the heat shield to strip the bolts, the bolts for the shifter in the plastic will spin and wont undo so you will potentially have to drill them out and the lower two for the surround bracket are captive nuts and can strip really easily. Soon turns a hour job into a 3 hour one
@HLMotorsport 2 жыл бұрын
Yes the zipties really helps to stop it from rattling!
@jacklucas8074 2 жыл бұрын
@@HLMotorsport lifesaver, thankyou will 100% try this😁
@arrindaley3714 2 жыл бұрын
Mine rattled because the ball and white nylon socket it fits in were such a poor fit for each other, I took it apart and filed down the split in the nylon socket until it was a good fit then wrapped it in tape and fitted it back inside the blue collar. Mine seems the same as yours but I've heard of cheap copies so I may have got one of these.
@adilsonsilva1060 Жыл бұрын
Same problem here
@emilthomsen45 Жыл бұрын
im pretty sure the short shifter is for gti-r nissan thats why you have 2 use 4 washer......
@jamesmura7445 9 ай бұрын
Will this be the same for nissan primera or g20
@immobilescroll8490 8 ай бұрын
Yes it will
@magnatech 2 ай бұрын
Hallo HL, Zijn deze shortshifters nog te koop? Hoor graag!
@momfiethehunter504 2 ай бұрын
Je kunt ze op aliexpress of ebay kopen alleen staan ze niet als micra shortshifter tekoop maar als nissan pulsar, of gti-r maar het is exact dezelfde als deze die in de video geïnstalleerd wordt
Sergio Outdoors
Рет қаралды 40 МЛН
CUSTOMER COMPLAINTS PUTTING THEIR FOOT DOWN AND GOING NOWHERE!!!!!! NISSAN MICRA CLUTCH REPLACEMENT.
baz meredith 🤙
Рет қаралды 6 М.
Jon Coupland Cars
Рет қаралды 2,1 М.