Nissan Navara 2008 ignition barrel repair

No video

Nissan Navara 2008 ignition barrel repair

Рет қаралды 28,642

Kawa86

Күн бұрын

I made a small video of the repair I did on my Nissan Navara 2008 ignition barrel.

Пікірлер: 23

@stephenburston8197 4 жыл бұрын

Absolutely fantastic effort. Thank you for taking the time to explain your fix. It worked perfectly on our ignition that wouldn’t turn anymore. Thank you.

@AzizAllam 3 жыл бұрын

Thanks for the advise

@TradNarrowboats 4 жыл бұрын

Those ‘keys’ that you put back to secure the collar are called ‘grub screws’ in england

@FallenAngel8666 4 жыл бұрын

Thanks!

@TradNarrowboats 4 жыл бұрын

Kawa86 thanks to you I was able to vet this job done myself and saved a lot of money!

@alwilliams8882 Жыл бұрын

They are called Allen keys, or Grubb....screws...

@johnbrennan7175 3 ай бұрын

@@alwilliams8882we use Allen keys to tighten the grub screws

@Rem0ver8 8 ай бұрын

Which bit do you grind the material from?

@martinbell7728 5 жыл бұрын

Hi. I've done this and it worked, however now my key fob/buttons does not want to lock or unlock the doors. The internal centre console lock/unlock button still work fine, only my two keys. I've tried recoding diy without any success. Do you know what might have gone wrong? I have a 2014 Navara spain spec, and im based in South Africa.

@FallenAngel8666 5 жыл бұрын

Hi, I'm not shure how this could happen, I did not have any problems afterwards. Since your car is about 6 years younger than mine was, maybe the keys lost there programation after disconnecting the lock/transponder ring? Reprogramming them could be a solution. I don't know where the reciever for the remote control is located, if it is around the ignition barrel, maybe something is disconnected or not properly (re-)conneted? In my repair manual there is not much information regarding the remote control, and its only for car's from 2005 thru 2013 so I'm not shur your car is the same system. I hope you find a solution soon! Best regards koen Goossens

@Petterjunior 3 жыл бұрын

I had the same , it was the key in position switch at the top of the barrel , it can fall out of position so that it thinks the key is in all the time , and the remote will not lock or open 👍🏻

@dariozmak6319 2 жыл бұрын

Hi Martin, I do notice you posted this two years ago, but I was seeing if you still remember, as I have the same problem now. I too have a 2014 Navara (spain spec) I haven't done my ignition yet but just wondering if I have the same problem as you with the lock or unlock was it an easy fix. Also is it easy enough to remove the barrel (is it just removing the cover around the steering wheel or do I have to remove half the dash)

@dariozmak6319 2 жыл бұрын

@@Petterjunior Hi, I have filed the barrel and the key is turning sweat now, but I have the same problem with the remote, as you did. How did you fix the problem, do I have to take the barrel out and turn it a bit? I thought I may need to buy a new switch that connects up near the barrel. Thanks for any feedback.