www.williamsmobileclutch.co.uk 🇬🇧 Contact us for your clutch replacements. Thanks for all the support and feedback

This blokes a ledgend. Ive been a mechanic 20 years and still check out his videos for tips and tricks before tackling big clutch jobs . These are a ball ache at the best of times but made 100 X easier after watching this .

Every car, every van is a winner.................Britain can rest easy, they got the very best mobile mechanic on the street. Thanks Kevin, man you are the best !🙂

Clutch Master Number 1 on KZfaq

Kevin you are the best in the UK. What a load of work just to get the gearbox out, the bloody manufacture made it labour intensive so the dealer would make a lot of money doing the replacement. And they could make a clutch design to last the life of the vehicle but they don't.

Absolute top job. Quality workmanship and efficiency. Hope your work can inspire others in you business.

This Nissan takes the cake when it comes to the number of parts and panels that have to be moved just to get a clutch repair done. It would have taken me a week or more to do it as a DIY at home, with mugs and mugs of hot chocolate, a Haynes manual and lots of patience.

I've done this job twice on my van, after the first replacement LUK friction plate failed after 5k, and fair play you sir make it look easy lifting that box back in on your own!!

Thankyou mate. My local official Renault dealer in Australia refused to do this job because he said my 15 year old van was too old and his mechanics weren't trained for it... I kid you not!!!??? Found another Euro specialist but was quoted 20 hours labour and a $4500 bill, on a van which is only worth $6000. I guess that's why so many of these vans end up at the wreckers in Oz. At least watching your video gives me hope that with a bit of time and patience it is something I could do myself. Cheers 🍻

Hi Kevin. An update to my previous comment. My friend and I replaced the clutch in my Trafic last week with your video as guidance. Although it still was a very challenging task, thanks to you, we successfully completed it! We changed the clutch and slave cylinder for $650, instead of the $4500 I was quoted by a mechanic. I really can't thank you enough. You deserve all the accolades you receive in your comments. Ian 🙏

Great work.. i feel ashamed that i have that car here on the lift and that i have to watch your video to get the gearbox removed.. mad respect!

Dude you are a machine. Best vid ever just put clutch in a trafic followed your exact system, only mine is semi automatic. I specialise in the robot units repair reprogram. And man how you roll that box out and in again? You must have arms of steel. 😅 anyway dude thank you. !!

Very great job!!nice to hear some conversations)) little bit is enough

Thank you so much for taking the time to do this video much appreciated your awesome

Good job Williams..I’m from Malaysian see your skills work in KZfaq..have a nice day..

That looked like a difficult job with a lot of work to get the clutch off. Well done and thanks for the video! God bless you

Excellent video. Very precise and educational. Thank you

@Kevin-Albert Williams the work you do is impressive, you are very careful and professional. greetings from spain for you and yours keep it up and never lack work

Fair play Kevin got a great few tips just from that to do my own. Keep it up, great help 👍

Ну что могу сказать? Качество видео растёт постоянно, это очень приятно. Мне кажется не хватает тихой музыки при работе.

Bonjour très très beaux travaille calme sans vous énervé je me suis abonnée à votre chaîne le travaille et consciencieux dans le respect de la mécanique Merci pour le partage de la vidéo et en plus très très bien filmer 👍

Respekt. Gut geschafft.

You are strong man who a great mechanism cars

Nice job 👍 thanks for sharing Kevin 🔧💥

The best in the best in the world. Great!!

Just had mine done! No wounder it was so much money to do! 😮

Grazie mille sei stato di vero aiuto 😊

SUPER

Good job

Super mecano ,bravo et merci

Really great video. Well edited and full of important detail. I need to do my 2007 2.5CDTI. I helped my mechanic last time to do my clutch. (He gave me a discount for helping) This seems pretty much the same in all areas. PF6 gearbox I think. This time i need to do the gearbox syncro's 3rd and 4th. I will do that myself, but are there any other details for the 2.5 that spring to mind? Many thanks!!!

How do u do it unreal to watch that van needed much more work on it.Don,t think they look after it at all has it ever had a full service or do they wait till it breaks down .Hell another great bit of work cheers.

Pretty clean oil in that van

geñio William

Brilliant work as always Kevin 👍 how much would this job cost? I have the same van, same year, engine etc. Keep up the great work!

That looks like a heavy one!

👍👍

ive never put grease on the dowels before and never had a problem with them, but yesterday i did a gearbox and jeseus... the shaft went into the clutch splines within 2 minutes, but the god dam dowels. in future i think ill start doing what you do with that red lithium goo,

Nice & beautifully ! One question, do you use a extra bottle with brake fluid to put the small hose in! to get the air out of the clutch system?👍👍👍

9:15 what's this plug for ? how do you release it ? i can't figure out with the aluminium stuff around ... awsome work anyway ^^thank you

Great videos on these Trafic/Vivaro/Primastar vans. I have to do it on my Vivaro soon and your videos will help me immensely! But I can't for the life of me figure out if I need the 240mm or the 242mm clutch. I tried checking the kits in your videos out but all the parts stores tell me I need the 240mm version. You on the other hand used a 242 on the silver Vivaro (and I can't figure out which version was used here) which is shown online as the right one for the semi-automatic gearbox. I have a 2009 114hp 2.0 6 speed manual though.. would you be able to help me out?

Super mache ich gerade . Musste sehen wie das raus geht 😉👍

You know when you undo the gearbox mount and drop the engine on the jack to get to the other gearbox bolts... does that mess up the dogbone gearbox mount or the upper engine mount?

Дорогой британец, я понял что повысит Ваши шансы встретить старость счастливым и здоровым. Считаю что Вам нужно продумать вопрос более надёжной фиксации задних колёс. Мне думается аккумуляторный домкрат с пультом дистанционного управления съэкономил бы силы для личной жизни каждый день.

I've got a Renault Trafic 2.0L 2008 6 speed. Finding it hard to get into 1st and reverse. I've found if I select 6th gear first it usually goes into 1st or reverse OK. Would you say clutch or gearbox?

thumbs up from me buddy 👍👍

👌👍

Replaced my clutch myself, literally followed every step with care.. Now when revving my engine and it reaches 2k rpm I start hearing squeeking noise.. Once it passes 2k rpm the noise goes away.. Any help what could that be? Got no issues changing gears and clutch pedal feels ok. Good job tho, love your videos!

👏👏

Un espectáculo de vídeo. A un familiar mío, su mecánico le pide 1800€ por hacer embrague de una Nissan PrimaStar. Me parece muy caro, verdad?

👍👍👍👍!!!

How much roughly is for 2008 clutch replacement and how many hours I know distance changes it like I’m in bolton

Can you tell me where you got your interlocking rubber mats? Mine don't work properly

Пробовали ли Вы сниматься в рекламе нижнего белья? Вариант разнообразить жизнь и подзаработать. При такой атлетической работе я уверен с красотой фигуры проблем не будет. Китайцы например любят нанимать для продаж на внутреннем и внешних рынках эффектные телосложения.

hola pedazo de mecanico , tengo una nissan primastar y al comprar el kti segun el mecanico no era compatible el cojinete de embrage el que va en la caja de cambio cojinete central , bien pues he visto que este si tiene dos tornillos y se parece mucho al mio , que caja tiene , es decir caja y referencia , la mia no la se para mi que es una pk6 pero no tengo la referecia , le pregunte al mecanico y dice que no se ve bien

I didn't see you fill up the gearbox with oil?

Когда будет обзор на обувь и спецодежду?

Hi how much do you charge for this on this as I have the same van

Does this van not have a duel mass flywheel?

Do you film it so you know where everything goes back together?

Good job bro 😊😊 what is the part number of your milwaukee?

What do you think is the easiest vehicle to change clutch on?

Do you have a video of a Renault Espace 4 2.0 dci?

Why do you allways undo bolts with the impact already turning? I don't get it

Ustedes donde se encuentran gracias

driveshaft seals nearly always leak after shafts out and back in

👏👏🖖🍻

Do you need to remove the starter motor?

I did one today 3 hours in flour

Incroyable vidéo vraiment bravo🦾🦾

Hello, can you send me the link of the rubber mat you use?

How do you know if the fly wheels ok?.

baucoup de demontage !!!!

What are you spraying at 32:07?

This diesel clutch gone relative quickly and its not so easy to replace them

What would this Job cost?

Good mwcanic