Went to the dealer, they even print out the location of the thing but mine have 5 rows, on paper they have 4 rows. I didn't realize 4 rows was hidden under the 5 rows until I watched your video. Thank you so much.

Thanks bro u saved me $350 for ECU that I was about to buy and program it ➕️ the towing to take it to a mechanic , i did spend $200 cuz I changed the gas pump ➕️ I changed all the sensors cam and crank ,oxygen sensors too,trotle body ,air flow ms ,evap valves,and all the relays on the same box from the top but I couldn't see the bottom relays until I saw your video and right when I changed that single relay it turned on thank you very much, i really was about to get an other ECU but I opened it and checked that there was no signs of burned component's or smell so even the mechanic that checked the truck told me that it was gonna be the ECU but I didn't want to trust him n decided to keep looking for more info n videos to see if someone has the same problem I was about to give up n buy the other one but I found u n here am I thanking you for your time n experience making this vid thank you..!! again my truck it's a 2004 nissan titan LE 2wd n I used all the sensors and relays from an other titan that I have 2006 nissan titan LE off-road 4x4 so most of the stuff are the same than a 2004 2wd 🎉🎉😊😊

You are a life savior 🙏 been struggling with this issue for years 😅thank God I ve found your video

Thank you so much for this video. I have the updated black ECM panel in my 2010 Armada instead of the white one like yours, but the suggestions you had here lead me to replace the ignition relay in my Armada and seems to have cleared the no-start issue up. Sometimes it would start right up, and other times it took 2-25 key turns before it would start.

THANKS 4 SHOWING ME THE RIGHT 1 . I WATCHED THE (( OTHER GUY )) VIDEO BUT 4 SOME REASON HE SHOWED THE WRONG RELAY AND I ENDED BUYING THE WRONG RELAY 4 MY ARMADA . GOOD LOOKING OUT !!

Thanks bud , I wasn’t having the same problem as you but you gave me the location of that rear fuse box which lead me to find the problem so thanks.

Thank yu so much for showing me the right location.

So, you are right that is the ECM, the other that is shown in the other video is the starter relay… which can show up too. Not sure what the ignition relay does? I don’t see schematics for it. People have also had issues with the starter switch under the dash. Two #1 Phillips screws and wipe it off inside, just open carefully.

I ordered a new relay, this issue has so many videos, replace IPDM, replace relay, replace starter and the best one yet, replace ignition switch and I cant find a part for an 2005. So when the relay arrives I'm going to try it. My question is after replacing your relay, after all this time, did it solve your starting issue? I wish there was a clear answer for this common issue with the Nissan Titans. Video after video I noticed everyone having the same problem when they try to crank the starter... you get a chung sound. Im going to look under the dash soon and see if I have a round ignition switch and if I do it makes sense that could be the problem. Just like the ignition switch to a zero turn... they eventually wear out. Anyway thanks for posting your video. If I ever solve this problem I'll make a clear and cut video, with no stupid rambling like some people on here... Jesus! Your video is very good btw!

Very helpful, got it done, thanks.

thanks for this video i'm having the same problem and i found the solution watching your video muchas gracias señor

Hello , would this be the same method on a 2010?

Do you have to disconnect the battery first? I see you took out the battery. Thanks!

Was it turning over but not starting ?? Or wasn’t even turning over by the starter ?

Replaced both of them. Still cranks when it feels like it. Going for the ignition switch next.

Did changing that relay work

do anyone know why i have to turn my steering wheel to crank my 07 Nissan titan will this solve my problem?

Good video. Did it solve your no start?

Hi, So if mine doesn't start but makes a click sound, is it an ECM issue or a starter issue? I have a new battery.

Mine is acm33201 m08. Why can’t I find this new

My junk of junk 2006 has been a pain in my ass. She runs great once she's started. I can't get rid of her. It clicks one time trying to start. I replaced POS connect. It used to start when I put it it in drive and slammed it back to park orturnenedon lights, radio, and air con blower

On mine it doesn’t have the bottom relays

Did you say it would crank and not start? Or no crank at all