Nissan Xtrail Cylinder Head Gasket Replacement. (Part-1 removal) how to remove QR25 cylinder head
Рет қаралды 6,477
7 ай бұрынIn this video I’m showing how to remove Nissan Xtrail T30 Cylinder Head Step by Step.
This engine has minor engine overheating issue and highly burn engine oil. So going to have a good inspection on this.
#nissan #nissanxtrail #xtrailheadgasket
#nissanQR25 #cylinderhead #nissanheadgasket
#mechanic #mechaniclife #mechanicinaustralia
@BimBimBam420 4 ай бұрын
awsome video mate!
@philipnel1750 5 ай бұрын
You can actually remove the head with the inlet manifold stii attached. Saves a lot of time...
@jasonlavelle3293 4 ай бұрын
Recently replaced the valve stem seals on mine, along with new head gasket, exhaust and intake gasket, refitting head bolts takes alot of patience and strength 😅
@davidmayorga2734 6 ай бұрын
Hey, nice job! Looking forward to the next video.
@Shanoz_Builds 6 ай бұрын
Thanks for watching. Appreciate it.👍
@tonganwill1663 2 ай бұрын
Hey mate, I'm thinking I also have a blown head gasket. Did a cylinder compression test the first and last cylinder was I think 60psi and the middle 2 where on 120psi, is that a blown head gasket? That's for your help legend and your video was very helpful with great instructions. Whats the cost for a mechanic to fix this is im in NSW.
@Shanoz_Builds 2 ай бұрын
Does it overheating? Sometimes could be piston rings worn out.
@tonganwill1663 2 ай бұрын
No over heating or milky oil what so ever. Car was fine when driving 3hrs latter went to start it again which it did then just turned off and engine light came on.
@tonganwill1663 2 ай бұрын
And won't start again after that.
Killa Watt Garage
Рет қаралды 2,9 М.
𝓢𝓱𝓪𝓷𝓸𝔃 𝓑𝓾𝓲𝓵𝓭𝓼
Рет қаралды 3 М.
Killa Watt Garage
Рет қаралды 1,3 М.
mesing2005
Рет қаралды 88 М.
Wow Mechanics 1
Рет қаралды 10 М.
Killa Watt Garage
Рет қаралды 1,8 М.
Official Hasnat Gamer
Рет қаралды 2,9 МЛН
Chandan_edit _n.3
Рет қаралды 13 МЛН
ПОТОК AI
Рет қаралды 3,6 МЛН