what size pinion gear did you use?

Your welcome, thanks for watching matey 👍🏻

Thanks matey, it worked better than I thought as the motor is a little small 👍🏻

Fantastic!! Let us know how you get on 👍🏻

Thanks for watching matey, appreciate it 👍🏻

Trust me you'll never look back, not to mention you can sell your engine and fuel tank for a pretty penny 👍🏻

@@rcworxshop what nitro motor did u have? Are u selling it?

Ohhhhh goos idea 💡 nice one 👍🏻 I'm sure he'll try and out send us lol

Thanks for watching matey 👍🏻👍🏻

Hobbywing 1650kv is better...smoke the tires easily

Appreciate that matey thank you for watching, here's a like to a motor mount on ebay and a great value esc and motor combo www.ebay.co.uk/itm/144629270598?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=1tzoan7vsre&sssrc=2349624&ssuid=bDBA4C0hTOG&var=&widget_ver=artemis&media=COPY esc and motor www.ebay.co.uk/itm/295021988958?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=owmmlsiysms&sssrc=2349624&ssuid=bDBA4C0hTOG&var=&widget_ver=artemis&media=COPY

@@rcworxshop thank you so much for the response. The mount page is no longer available but thing I have found a hsp mount that may do the trick.

The motor size is a 540 so as long as the mount is a 540 you'll be fine

I've converted a tmaxx before, it turned out well 👍🏻

Did my tmaxx to brushless ..4s lipo, hobao 150a esc, 3200kv......wheelies all day ..just change out ya center front n rear drive shafts to HD 77mm metal dog bones shafts and diff cups ....stock shafts twist like a pretzel....but be easy on it.....front n rear diffs ain't made for brushless motors....center diff 2nd gear has to be locked in too with screws so ya have brake n reverse...it's a process to change over the tmaxx....motor mount I made out of aluminum 1/4" flat bar

Thank you so much, that means a lot really appreciate the feedback I'll add a few links below that will get you started, keep me posted on your build 👍🏻 www.ebay.co.uk/itm/174828808651?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=dPXUYVFRTle&sssrc=4429486&ssuid=bDBA4C0hTOG&var=&widget_ver=artemis&media=COPY www.ebay.co.uk/itm/174836567796?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=dPXUYVFRTle&sssrc=4429486&ssuid=bDBA4C0hTOG&var=&widget_ver=artemis&media=COPY

you can relocate two of the three motor poles and it wil switch directions

Sorry for the late reply if the motor only has three wires coming off its called an un sensored motor, if that the case simply try the blue swapping any two of the wires from the motor to the speed control 👍🏻

You need to put your motor in the mount with pinion gear on and line it up with the spur when it's perfect you need to draw round the motor mount on the chassis with a marker then you'll know where to drill the holes 👍🏻

Try this one matey, I used what fit on the day 👍🏻 www.ebay.co.uk/itm/194227210244?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=NMFbeOBZQ_W&sssrc=2349624&ssuid=bDBA4C0hTOG&var=&widget_ver=artemis&media=COPY

@@rcworxshop thanks!!!

Hi Mark, there's only a select few rc I would recommend spending the money on to convert, unfortunately the landmax isn't one of them unless it has sentimental value, the only reason I say this it conversions aren't cheap and would probably benefit you buying an electric modern day 1/10 buggy, car, truck? Any more questions please feel free to ask and thank you for watching 👍🏻

No just the single speed 👍🏻

Your esc will need to be calibrated, should be a little button next to the on switch / button

My on switch is on a wire that comes from esc

Does it have a little push button by the switch? Or a little button the the esc?

I've been told I need to lock the gears cause they are just spinning

Oh so the motor does revers but the gears don't?

I've not got any as it was bits I had spare, what was it you wanted to know and I'll find out for you 👍🏻

I've got one lol, I do prefer electric setup, I have other nitro models I use on the odd occasion 👍🏻 thanks for watching 👍🏻

Agreed but it works well and doesnt get to warm 👍🏻 only meant to be a cheap conversion 👍🏻

Why are you sad?

@@rcworxshop poor engine just got removed from its home haha jokes

🤣🤣 I still like and have a bit of nitro in the collection but they are soooo temperamental, thanks for watching matey 👍🏻👍🏻

@@rcworxshop haha no worries true they cna be fun while set up right haha

Don't talk silly, this is still going strong its been out at least 50 times, skatepark jumps speed runs etc

Also Where's your video if your the expert 👍🏻

what a great idea. indeed i will make a video to show the world how it should be done. and you can guarantee i wont be drilling holes in the chassis like an amateur!!@@rcworxshop

​@@michaelinzitariyour just been silly and stupid 😂 its a hobby he got it working theres no right or wrongs if it makes him happy so what? Its working is it the best maybe not but is it still usable yes? Get a life lol