CBI Covert Bumper, Install/Review on 2022 Toyota Tundra TRD Pro...Paired with Gear America Shackles!

Рет қаралды 120,662

Жыл бұрын

step by step guide to installing the CBI Covert, and yes, it fits the Hybrids! (watch to find out more)
Channel Partners/Discount Codes
xtrusion-overland.com/ Code- NitroZ18
LASFIT lddy.no/qnhl Code- JUDGE10
ESP Truck Accessories- www.esptruck.com/NITROZ18FISHING
Discount Code- NitroZ18Fishing
carlinkitcarplay.com Code- Z18
carpuride.com/?ref=Z18 Code- Z18
screenprotech.com/NitroZ18Fis... Code- Z18
www.tufskinz.com/ Code- Nitro10
cupgrip.com/?ref=Z18
Ultimate9 Throttle Controller- bit.ly/NZ18-evcX Code- NITROZ18
www.setpowerusa.com/ Code- NitroZ18Fishing
Cobra RAD 700i Radar Detector- shrsl.com/4g29d
blackbeardfire.com/IFISH2248 Code- IFISH2248
www.YOLOtek.com/?rfsn=2358729... Code- NitroZ18
billettiedowns.com/ Code- NitroZ18
www.shinearmor.com/ Code- Judge20
versatrax.com/ Code- NitroZ18Fishing
coverado.com/?ref=JUDGE10 Code- JUDGE10

Пікірлер: 217

@NorthPaddle Жыл бұрын

Guys like you make life so much easier in the KZfaq era. Thirty years ago I installed an aftermarket front bumper and Warn winch on my Toyota truck and it was a very trying, learn as you go process. Nice production in an easy to follow format.

@NitroZ18Fishing Жыл бұрын

Thank you, I appreciate the feedback!… Let me know if I can ever help with anything!

@ronwridge9904 Жыл бұрын

Informative video! Great job on the install, but I want to let you know that the side bracket show at 24:00 should be on top of the plastic bumper tab. If you mount it with the metal side bracket on the bottom, then when you tighten the fastener you will most likely crack the plastic bumper tab. There is a circular ridge on the bumper tab and if you mount if the way you did, it will result in a gap in the clamped assembly and the plastic will crack because of the compressive stress placed on it. After watching the bumper tab crack on the CBI installation video, I contacted them and they admitted that they had installed one of them backwards too.

@davida7284 Ай бұрын

As much as it sucks Toyota didn’t plan for this, you did a fantastic job detailing the process. BRAVO👍🏻

@NitroZ18Fishing Ай бұрын

Thank you, I appreciate it!

@edejong1969 Ай бұрын

I don’t usually leave comments but this is the BEST video! I must have watched it about 20x before and during the install of the CBI bumper w/bull bar and Warn EVO 12 winch on my 2024 Tundra. Everything went smoothly and it looks great. Next step is to tension the line, and conveniently enough, I see you have a video for that too. Great job!

@NitroZ18Fishing Ай бұрын

Thank you, I appreciate that!! So glad the video helped out!!

@dirtdog726 Жыл бұрын

I like the look of this bumper. It has the look of the stock bumper but gives you a mount location for shackles. Looks great.

@NitroZ18Fishing Жыл бұрын

Agreed 100%!… That's what I love most about it, it's nothing overboard, just enough… Integrates with the body lines of the front end perfectly, my favorite addition to this truck so far!… Thanks for watching!

@antoniodavis8266 Жыл бұрын

I'm a permanent subscriber! Man you keep pushing out awesome and very informative videos, keep up the good work.

@NitroZ18Fishing Жыл бұрын

Thanks man, I really appreciate that!!...if I can ever help at all don't hesitate to ask!!

@royschwartz3422 Жыл бұрын

Thanks for the great videos. It took me 6months to get my TRD Pro and now comes some excellent additions.

@NitroZ18Fishing Жыл бұрын

No prob, thanks for watching Roy!... if I can help with anything just let me know!

@NitroZ18Fishing Жыл бұрын

And congrats on the truck!

@apexcapital1328 Жыл бұрын

What they should of done in the first place.

@NitroZ18Fishing Жыл бұрын

Agreed, but then it wouldn't give me a project to ruin one of my wife's blankets 🤣

@troyhodulik5542 Жыл бұрын

Why would you expect tow hooks on a $65k+ 4x4 vehicle when you can spend another $1k+ and a few hours of time to add 1 yourself?

@viperviper5 Жыл бұрын

Exactly

@dethtour 5 ай бұрын

@@troyhodulik5542it would have been nice. But I do like the fact they left an aftermarket spot to add whatever we want

@demar002 Жыл бұрын

You do an awesome job bro. Thank you for making these videos. Looking forward to the winch install video.

@NitroZ18Fishing Жыл бұрын

Thanks Frank, I appreciate that!… Me too, I want to get the winch on ASAP to complete the look/project and get this thing off the beaten path!

@brammcphillamey1661 Жыл бұрын

Very good explanation. I'm installing one currently for a customer and this was very helpful 🤘🏻

@rickwahlberg3207 10 ай бұрын

Picking up my 23 TRD pro today!

@DCardz Жыл бұрын

Loving the videos man, time to start building out my Tundra!

@NitroZ18Fishing Жыл бұрын

Thanks man, much appreciated!... if I could help with anything let me know!

@smittysmitty481 Жыл бұрын

This mod is almost a must on the Tundra. Cool video

@NitroZ18Fishing Жыл бұрын

Thank you!… And totally agree, my favorite mod so far!

@Two_Buck Жыл бұрын

Excellent walk through. Looks great.

@TXTundra-ex8bw Жыл бұрын

You did an amazing job buddy it looks so freaking awesome unfortunately I do not have the balls to try cutting up my brand new HV Limited Tundra with less than 100 miles

@matthewdelong3607 Жыл бұрын

Dude that’s sick!!! Mine will be here after the first of the year! Can’t wait! I’m going to be running the Traveller X 10,000 lb winch! I can’t wait!

@NitroZ18Fishing Жыл бұрын

Thanks man!...you're gonna love this thing, I can't wait to get my winch on!

@r32gtr10 Жыл бұрын

Thank you for this! So well done and easy to follow. Looking forward to the follow up.

@NitroZ18Fishing Жыл бұрын

Thanks man, I appreciate it!!...can't wait to get the winch on!!

@scooty67 Жыл бұрын

Excellent Video, wish I had it when I installed mine! Thank you! I used an oscillating saw I think it was much cleaner. After watching several videos, I'd highly recommend it with a good blade.

@NitroZ18Fishing Жыл бұрын

Thank you, I appreciate it!...yea that would work really good as well, thanks for the feedback!

@mydannyboy68 5 ай бұрын

Absolutely an excellent expert like tutorial on the install, now I'm super motivated to do mine 😆 thx

@Nosaj-dt1ij Жыл бұрын

I was cringing the entire time you were carrying it! Nice blanket. Where do we buy those? Lol. Seriously…great video. Thanks.

@NitroZ18Fishing Жыл бұрын

Hahaha...thanks man, much appreciated!...my wife is a Spanish teacher (full blooded Italian, never understood how she went that route)....she got that blanket in Spain, which is why she didn't take too kindly to me using it on garage floor 🤣

@dragonkiller1270 Жыл бұрын

LOOKS GREAT MAN!!! cant wait for my limited 2023, first thing imma do for sure.

@NitroZ18Fishing Жыл бұрын

Thanks man, I appreciate it!...this is hands down my favorite mod so far, love this thing!

@georgefromiami 2 ай бұрын

Great video, I will upgrade my grill to the Toyota one and this video will help tons, thanks

@tyronedeasbrailsford951 Жыл бұрын

Great job! Thanks for posting this information!

@majerrahim 5 ай бұрын

great video, i definitely be watching it again if i end up buying this cbi bumper, question, what are those 2 holes next to the towhooks? maybe for cube lights?

@teacherm96 Жыл бұрын

Man great video keep up the great work! Now I must sell my SRT Grand Cherokee to get the 2022 or 2023 Toyota Tundra Pro

@NitroZ18Fishing Жыл бұрын

Thanks man, I appreciate it!… This truck is hands down my favorite, highly recommend it… Let me know if I can ever help with anything!

@g2theb584 Жыл бұрын

Like the bumper! Looks good bro. 👍 The D-Rings look sharp on it too.

@NitroZ18Fishing Жыл бұрын

Thanks man, appreciate it!...yea I love those red shackles, match the red accents on the Pro perfectly...and those Uber shackles are no joke!

@Alekseyo 5 ай бұрын

Looks sweet. Great instructions

@petropete3122 Жыл бұрын

Love that bumper to man 🤙🏻. Tks for sharing

@NitroZ18Fishing Жыл бұрын

Thanks buddy!...much appreciated!

@88Petry 2 ай бұрын

Would welding the bracket to the frame be a better option (after installing the bolts)? That way there is no way u might accidentally sheer the bolts when getting towed?

@morelouder6801 Жыл бұрын

Another great video, thanks for the step-by-step installation process and detailed description. Have you noticed, or anticipate the shackles swinging back-and-forth and making contact with the bumper? Thanks.

@NitroZ18Fishing Жыл бұрын

Thank you, I appreciate it!...not at all, the shackles come with rubber spacers you install between them and the tiedown locations on bumper… Comes with different sizes of the spacers so you get a snug fit where they won't swing… Hope that helps!

@theonearmwolf4956 Жыл бұрын

great vid man 😮

@NitroZ18Fishing Жыл бұрын

Thanks man, I appreciate it!

@legionnaireguerra7511 Жыл бұрын

Can you lift your truck and keep your front skid plate ? Or would you have to buy an aftermarket skid plate depending on height or lift change?

@rodrigoarellano9729 9 ай бұрын

I was told by two body shops that you and must recalibrate the sensors when you remove the grill and disconnect the plug. Have you heard of any issues after unplugging the collision sensor?

@ElJefe360 2 ай бұрын

great job Man!!

@xRenegade44x Жыл бұрын

Hey man, Love the style of your truck and the new setup looks amazing. Im going to be buying a truck and im curious to hear from owners what your experience has been with the 22' Tundra in general and what kind of mpgs your seeing? hope you're well

@NitroZ18Fishing Жыл бұрын

Hey buddy!...thanks man, I appreciate it!...no joke, this is my favorite truck by far...I say it all the time, toyota couldn't pay me to go back to my 2020 Platinum!...this truck is better in every way imaginable, you won't be disappointed!

@harmantatla4250 Жыл бұрын

Thanks man. Great video

@NitroZ18Fishing Жыл бұрын

Thank you, I appreciate that!

@residualboulders Жыл бұрын

looks great! I guess I need to order another "christmas gift"

@NitroZ18Fishing Жыл бұрын

Thank you sir!...highly recommend treating yourself to this one, my favorite mod so far!

@shanewhittemore Жыл бұрын

I applaud you for doing such a great job explaining how to install this great mod but to be honest it would be too much for me to try myself. I am way to impatient and would somehow miss a step in the process you laid out. At 62 I have over the years learned my limitations and they are many. I will recruit a helping hand.

@NitroZ18Fishing Жыл бұрын

Thanks Shane, I appreciate that! Yeah absolutely, if you don't feel comfortable doing it grab an extra set of hands!… If I can help at all don't hesitate to send me a message!

@MrDW72 Жыл бұрын

nice blanket...

@dmbwa 11 ай бұрын

Your videos are great! Curious to get your reaction to the less wide coverage of the bumper to the old crash bar width. I can’t for the life of me understand why the CBI bumper surface area is so much shorter than the oem crash bar so that a lot more of the front tire and fender areas are left unguarded during a collision.

@RickBaucom 7 ай бұрын

Agreed, I was waiting for the re-installation of the crashbar. Not sure I personally would trade off safety for a bad ass looking bumper and recovery points. Nice looking install and great video by the way, thanks for the hard work.

@iggysworldvideos Жыл бұрын

Wow I love those tow hooks thanks for this video

@NitroZ18Fishing Жыл бұрын

Thanks brother, much appreciated!...those Uber shackles are no joke!

@kbussche Жыл бұрын

What running boards/sliders did you have on your tundra in this video?

@Juanca22221 11 ай бұрын

Looks great. Congrats

@TheChristian1288 Жыл бұрын

Looks good. I like products that look factory. Nice job

@NitroZ18Fishing Жыл бұрын

Thank you!!... that's one of the main reasons I love this bumper, looks like it could have come stock with it… Nothing overboard, just enough… Thanks for watching!

@pepitopepito6598 Жыл бұрын

The red toe hooks jus add that aesthetic touch that the Tundra needed badly

@NitroZ18Fishing Жыл бұрын

I agree!...really kinda ties the front end together!...thanks for watching!

@ThomasGates1787 Жыл бұрын

Does this bumper work with the Trd lift kit installed? I noticed after they installed the lift kit at the dealership they remove my factory fog lights, just want to make sure this bumper is compatible before I purchase it.

@mehrdadvalian3448 11 ай бұрын

Thank you for great explanation, Do sensors need to be recalibrate with TRD PRO?

@NitroZ18Fishing 11 ай бұрын

No problem, thanks for watching!… Mine were all good, didn't have to re-calibrate anything… Hope that helps!

@ddonnelly3557 3 ай бұрын

Great Job !! Thank you

@archerxo1 5 ай бұрын

Wow that look great

@aceontheline8718 2 күн бұрын

I'm so jealous of you guys who can do your own installs. I don't have the skill or honestly probably the patience. I would love to have this bumper with the optional bull bar for extra protection. My fear is that it would interfere with the sensors. Maybe no the bumper alone but with the additional bull bar. Any info on this would be greatly appreciated. Thank you in advance. Again my truck is the TRD Limited hybrid 2024.

@Jo5ue1 11 ай бұрын

Hopefully Toyota adds those tow hooks in their future Tundra models.

@CaptainKirk6658 10 ай бұрын

Will this bumper fit the 2023 Tundra? I bought an exhaust and it was slightly different for the 2023.

@studsauce7803 Жыл бұрын

Damn I wish this was standard equipment. Even if you don’t use tow hooks it makes it look so much better.

@NitroZ18Fishing Жыл бұрын

Agreed, this bumper is money!....CBI knocked it outta the park with this one, thanks for watching!

@davidsdean Жыл бұрын

Awesome bumper

@NitroZ18Fishing Жыл бұрын

Thanks Dave!

@INSANEBMW Жыл бұрын

Love it!

@NitroZ18Fishing Жыл бұрын

Thank you!!

@blrroman27 Жыл бұрын

love your contents! perhaps long drive vids soon? about how many miles have you put in your trd pro from you got it till now?

@NitroZ18Fishing Жыл бұрын

Thanks man, I appreciate it!!...I have about 11k on her already...time flies when you're having fun! 🤣

@waqarsyed6641 Жыл бұрын

AWESOME WORK DUDE VERY PROFESSIONALLY DONE AND EXPLAINED ONE SICK LOOKING TRUCK. Wonder if they sell the kit for 2021 TRD PRO THANKS FOR SHARING. HAPPY NEW YEAR 🎊

@NitroZ18Fishing Жыл бұрын

Thanks man, I appreciate it!… i'm honestly not sure what they offer for the 2021, I would take a look at their website… They make some high-quality stuff for sure, Happy new year!

@markchester1192 Жыл бұрын

Won’t lie, I am amazed at how much plastic is on this Truck for the cost! But love it anyway!!

@timladd5106 Жыл бұрын

Are those factory tires on your trd pro? If not, what size/brand are they. Thanks for the vid, very informative and I plan to do this to mine.

@NitroZ18Fishing Жыл бұрын

Hey Tim!...they're 35x12.5x18 Kenda Klever RT's...my favorite tire for sure, I've been running them for a couple years now...better than the "big name" brands I've used in the past...hope that helps!

@0GS0 7 ай бұрын

Good work man

@NitroZ18Fishing 7 ай бұрын

Thank you, I appreciate it!

@gilwolf7556 Жыл бұрын

Any idea how much the susspension dropped ? I wonder how much is the weight. I ordered one and it should be here in few days I hope I dont have to modd the front suspension so it can handle the weight better. Thank you for a fantastic video. I will be using your video step by step.

@NitroZ18Fishing Жыл бұрын

Thank you, I appreciate it!… I didn't even think to measure to be honest, but going off looks alone it doesn't seem like it dropped much at all… If any… Definitely nothing where the suspension would have to be modified for sure… If I get bored enough I'll take it back off and get some exact measurements, wish I thought to do that when installing!

@LoneWolfHustle Жыл бұрын

Looks awesome

@NitroZ18Fishing Жыл бұрын

Thank you, I appreciate it!

@jagaro Жыл бұрын

Nice...will be doing this as well. Does the weight of the bumper bring down the front end at all?

@NitroZ18Fishing Жыл бұрын

Thanks man, definitely recommend it!...my favorite mod so far!...and honestly I didn't even think to measure, wish I did... I will say just going by the looks it doesn't seem to have dropped it at all… So if anything it's minimal... who knows, if I get bored maybe I'll take it back off and measure 🤣

@D.7458 Жыл бұрын

Wow your Tundra is gorgeous 😢 I can just dream for now to be in one

@CP-fz4sr Жыл бұрын

Very awesome. I watched it like 3 times. Im in the process of ordering this for my 2023. My question to you is: The 2 small areas below your headlights. I see you put the Orange strips. Did you change those and are they the lights module, or you just added the orange strips onto the plastic? And the orange front sway bar. Where did you get that from? Awesome video. Ima follow your steps when I get mine.

@NitroZ18Fishing Жыл бұрын

Thanks man, much appreciated!... so the red strips on those areas below headlights, they are just vinyl strips that I applied for accents… No lighting… and the red sway bar is the stock sway bar that comes on the Trd Pro, hope that helps!

@CaptainKirk6658 10 ай бұрын

AFe sells a red sway bar if you’re looking for the same effect for slightly cheaper than the TRD

@rodeskelson4159 Жыл бұрын

what rings are those? looks great thanks for the video

@NitroZ18Fishing Жыл бұрын

Thanks man, I appreciate it!...they're the Gear America Ubers, here's the link if ya wanna check em out! amzn.to/3JaoMce

@mohammadalavai8220 4 ай бұрын

Can it be installed if you have an active spoiler?

@evilfinnigan Жыл бұрын

They don’t put towhooks because Tundras don’t need to be rescued. They do the rescuing. Lol.

@Kmar701 3 ай бұрын

That’s an awesome video. Quick question. That install didn’t affect your cameras or your sensors or anything right? Everything is perfect? It’s been a year you’re still plays with it? Thanks for the info Man”.

@NitroZ18Fishing 3 ай бұрын

Thanks man, I appreciate it!…no issues at all with the sensors/cameras, everything works as it should!

@laserant Жыл бұрын

Very nice job thanks

@NitroZ18Fishing Жыл бұрын

Thanks man, I appreciate it!

@javiervasquez8927 Жыл бұрын

Oh wow that's really good i'm a fan of your stuff do you know where i can get my hands on that covert bumper

@NitroZ18Fishing Жыл бұрын

Thanks man, I appreciate that!!...I got mine directly from CBI website...but there's actually several dealers that sell em...I would shop around for best prices...just Google "CBI Covert bumper 2022 Tundra" and you'll get a few options, hope that helps!

@narcism71 6 ай бұрын

Thank you for this bro

@NitroZ18Fishing 6 ай бұрын

Absolutely, thanks for watching!

@mdi04 4 ай бұрын

what tire and lift size? love ur truck

@kaliman198117ify Жыл бұрын

i dont have a tundra because not having tow hooks was a deal breaker for me but after this video how can you not want one

@javipau11 7 ай бұрын

Very useful video and great job! Could you please share the link where to buy the covert bumper? Thank you!

@NitroZ18Fishing 7 ай бұрын

Thanks man, I appreciate it!…I honestly can’t even remember where I got mine, they sell them at several locations…if you Google it you’ll see a few options, I would recommend checking around for sales!

@ajokerkidd71 Жыл бұрын

That looks like a factory bumper. Toyota should do this!

@NitroZ18Fishing Жыл бұрын

That's what I love about it, looks so streamlined with the truck...looks like it came from factory like this, and I agree, it should have!

@SpX-StarCraft Жыл бұрын

i dont see the link to the CBI covert Bumper. can u sent link plz

@tomchantara5094 Жыл бұрын

Well done thank you so much

@NitroZ18Fishing Жыл бұрын

No problem, thanks Tom!… I appreciate it!

@Loucanton Жыл бұрын

Do you have the link for ditch light installation on your TRD pro. Thank you!

@NitroZ18Fishing Жыл бұрын

I'm gonna be posting that video this week!...stay tuned, thanks for watching!

@1ZX10 9 ай бұрын

What type and size tires are those?

@gotchaSix Жыл бұрын

I've had this bumper on my truck since mid October and I love it. I am however extremely disappointed that it's almost completely surface rusted already.

@markf8256 Жыл бұрын

Sorry to hear that. That’s the challenge with aftermarket mods on the first year of a new generation truck. Even the mods need time for improvements and feedback.

@beverlyboys73 Жыл бұрын

That what I was thinking could happen. So, I take it that it's steel and not aluminum?

@JohnJacobJose Жыл бұрын

U have a link for the cbi bumper??

@chrish4835 8 ай бұрын

I have a scratch in the same cap of my bumper, how did you go about painting it?

@NitroZ18Fishing 8 ай бұрын

I actually haven’t done anything yet, I drive it offroad quite a bit so I have added more scratches unfortunately…my OCD isn’t happy about it 🤣🤦‍♂️…my plan is to eventually mask it off and respray the entire panel, I’ll make a video on it showing results when I get it done!

@TheRealMikeHalstead Жыл бұрын

I wonder if one could paint it with bed-liner paint first, so it won't rust?

@NitroZ18Fishing Жыл бұрын

I'm sure with the proper prep you could!...I'm considering color matching mine to my Lunar Rock!

@carlosnavarro4758 9 ай бұрын

Any trimming required?

@json2763 Жыл бұрын

Dang......oh man, that hurts my stomach to watch you cut up the bumper........great job on the finish product......👍

@NitroZ18Fishing Жыл бұрын

Thanks man!!...yea that's what scares most people who wanna do this themselves...but that's one thing I'm never afraid to do on this channel, just start tearing into things 🤣...my father in law used to say one of my favorite one liners, "god hates a coward"...I definitely try to live that way for sure, sometimes to a fault 🤣...thanks for watching!

@Arid379 2 ай бұрын

You have any issues on thus truck?

@carlosramirez7833 Жыл бұрын

Wuaooo you the best

@NitroZ18Fishing Жыл бұрын

Thanks buddy!

@KnittingThreads Жыл бұрын

First, beautiful work, great craftsmanship!! Secondly, do you know if this install voids Toyota’s warranty?

@NitroZ18Fishing Жыл бұрын

Thanks Joe!… It wouldn't void the warranty… Toyota would have to prove that the bumper caused whatever issue you were having in order to deny the warranty claim… Hope that helps, thanks for watching!

@KnittingThreads Жыл бұрын

@@NitroZ18Fishing thank you.

@NitroZ18Fishing Жыл бұрын

No prob!

@KnittingThreads 11 ай бұрын

@@NitroZ18Fishing Btw, I installed my CBI Bumber & Winch. Your video was the perfect guide. Thx a million!!

@bobbygrin22 Жыл бұрын

TRD pro bumper coming soon 😎

@NitroZ18Fishing Жыл бұрын

Nice!

@codename7832 Жыл бұрын

Its just mesmerizing how they call this TRD PRO (OffRoad version) but whole factory front end its held up by plastic extensions and bumper its actually lower then front skid plate so in case of front impact while offroading whole front gets ripped apart before even touching skid plate.

@Rottingboards Жыл бұрын

You did a great job with the install video. I loved how you taped painted areas for protection. With all do respect...try to stop saying the word "basically". The elimination of this word will make your videos more professional. Thanks for your time showing us this upgrade.

@NitroZ18Fishing Жыл бұрын

Thank you, I appreciate it!...yea, I have to stop saying "basically" and "actually"...I do it all the time, even off camera! 🤣...thanks for the feedback!

@Rottingboards Жыл бұрын

@@NitroZ18Fishing I also had a habit of saying awesome. It took a while to stop the habit. lol

@arturolagos29 Жыл бұрын

What's the name of the lay down roll around thing you were using? Amazon link? I need something like that

@NitroZ18Fishing Жыл бұрын

Here ya go, I love this thing!...use it all the time in the garage, here's the link! amzn.to/3i2cedq

@arturolagos29 Жыл бұрын

@@NitroZ18Fishing thanks! Much appreciated

@NitroZ18Fishing Жыл бұрын

No prob, happy to help!

@AdmiralGlascock Жыл бұрын

Any idea if this will work on a Platinum?

@NitroZ18Fishing Жыл бұрын

Yes sir, it works on all trims...if you have the front active air damn they sell a kit to work around that....hope that helps!

@jimchen4755 Жыл бұрын

Man your truck added up more than $100 k . But nice and good work. I can’t keep up with that what you doing to your TTD Pro.

@NitroZ18Fishing Жыл бұрын

Thanks Jim!...I'm fortunate to be able to do what I do, and I don't take it for granted!...I appreciate the support!

@Joalse Жыл бұрын

Can this be done on the Sequoia 2023?

@NitroZ18Fishing Жыл бұрын

Hmm, that's a good question… I'm honestly not sure… I haven't seen any sequoias in person to even check for you, I would email them and ask, you never know!

@johnmeeboer6044 Жыл бұрын

Where does your front licence plate go

@NitroZ18Fishing Жыл бұрын

They make bracket kits where you can place it over winch location and flip it up when winch is needed... thankfully we don't have to use front license plates in Pennsylvania but if we did you have that option!