No More Stuck Doors! TMR Customs Delrin Door Hinge Liners

No More Stuck Doors! TMR Customs Delrin Door Hinge Liners - Jeep JK Wrangler 3

Рет қаралды 47,132

6 жыл бұрын

🔔 Please CLICK THE BELL if you want to see my videos! 🔔
www.tmrcustoms.com/jeep-speci...
Jeep Delrin Door Hinge Liners/Bushings
Sick of hard to open, leaking, sagging or hard to remove doors on your Jeep Wrangler? TMR Customs has the fix with our Jeep Delrin Door Hinge Liners!
If your Jeep Wrangler doors are hard to remove this is the best fix. Jeep Delrin door-hinge liners/bushings replace the factory door bushings to make it easier to remove your Jeep doors, while fixing leaks caused by sagging doors. CNC-machined from Dupont Delrin, TMR Customs Jeep door bushings are easy to install and available with a tool to make it easier to remove the worn factory liners.
CNC machined in-house to exacting tolerances
Made from genuine DuPont Delrin
Simply remove your worn out factory liners and press in place by hand!
Includes the following:
- Replacement bushings for both driver and passenger door hinges
- Detailed step by step instruction with a video link to watch a complete install
Designed to work with your factory door hinges. Includes detailed step by step instruction manual. Installation requires nothing more than simple hand tools and can EASILY be done at home!
WILL NOT WORK WITH AFTERMARKET HINGES OR DOOR PINS!

Пікірлер: 85

@markkiger5219 3 жыл бұрын

I found that using some of my gun cleaning brushes was very effective. Hinge sleeves are right around 45 ACP.

@mikestinson622 5 күн бұрын

Hahaha! Did that very thing today.

@hdro99 4 жыл бұрын

Great idea on taking a screwdriver and bending the lip inward and hammering downward it turned out to be much easier

@beachboy4928 6 жыл бұрын

Mopar factory should put these on every Jeep. Life saver. First time I tried to take the doors off took me 2 hours with a bottle jack too. After buying and installing the TMR hinge sleeves (with cleaning the hinges and door pins) I put just a dab of fluid film and put the doors back on when it got hot again. 10 months later I took all the doors off again within a couple minutes and with ease. The TMR sleeves are a great investment. Turning the doors at about 2 o'clock while lifting helps too.

@patricksullivan9713 Жыл бұрын

Wow, when I saw the old liner come out I went and bout them haha. I cant wait!

@BTD53 6 жыл бұрын

I installed a set today on my JKU, once I got the doors off...they are definitely going to make door removal a lot easier. Thank you and thanks TMR !

@dstallard5673 6 жыл бұрын

Just ordered them thank you for sharing. You've been making me pull the Wallet out quite often here lately. Just ordered the rain gear Trail cover yesterday and the Justice off-road Molle tailgate panel with the first aid kit and a few other attachments this morning. It's like keeping up with the Joneses

@driftlessareasingletrack2933 3 жыл бұрын

Thanks for another good idea. I bought my One up rack because of your video. Love it and recommend it to anyone who asks.

@Pimptorious69 3 жыл бұрын

Yours are coming out WAY easier then mine. Lol

@ToddKirst 6 жыл бұрын

I just replaced my Factory Door Hinge Liners with these Delrin Door Hinge Liners and boy does this make Removing the Doors a breeze now! Many Thanks for posting this Video CPO~

@o3djeeps 6 жыл бұрын

Todd Kirst it's magical! 🤣🤣

@LenSilvester 6 жыл бұрын

TMR, Awesome Products, no more Gunkificationing on your door pins. A tip for others, if a bushing will not come out with the tool, use a small reamer or step drill bit from the top side. Be very gentle with it and have it just break the corrosion/bond between sleeve and hinge. Love your problem solving skills and honesty in reviews, installs, etc.

@GalaxyFA5 6 жыл бұрын

Nice! I really want some of these!

@countmoney7 5 жыл бұрын

I used the side of a 2.5 lb metal mallet with a 8" handle and punched all of mine up from the bottom. It gives the solid umfff needed to loosen the factory sleeves with the supplied punch even with rock sliders. There is more force in a 2 lb mallet than standard hammer head. Drivers door sleeves were worn the most which made them the most stubborn to loosen. Used WD40 to clean/remove grit then used dry-spray silicone before inserting the new Delrin inserts. Switched to 2 lb rubber mallet to lightly tap new sleeves in. Doors swivel much easier/fasternow. Little to no effort when lifting to remove doors now. What difference! Note: I used your jack idea to take my doors off of the first time about a year ago and made sure to use a soft pice of pine between the jack and the bottom door flange. Once the wood made contact I went very slowly on the jack so it wouldn't warp the bottom of the door and kept an eye on the hinge for the first signs of release to stop applying anymore pressure. Worked like a charm.

@Grammer16 4 жыл бұрын

Thanks for your video. Looking at the hinge, I thought the top of the Metal liner was part of the hinge. No other video I watched showed what to look at! Very important for those first timers. The TMR sleeves are easy to use. Now Time to enjoy the summer- doorless

@upnboy 6 жыл бұрын

Great and funny video. Great strategy ;) i'll have to get a set of those.

@stuschultz4651 6 жыл бұрын

If the hinges go in so easy with hand pressure. Do they come out as easy when you decide to take the doors off at a later date. Like next spring? Seems like it would stick with the hinges on door.

@joesantos7196 3 жыл бұрын

Just did this today. Well worth it

@oraivan1 3 жыл бұрын

PAIN IN THE ACIDNESS? LMFAOOOF😂😂

@nickwitkowski5725 6 жыл бұрын

I need, would make life easier. Thanks for the info

@tizzflightops 5 жыл бұрын

pain in the ass taking my doors off a couple of days ago..ordered..thanks for posting.

@davidkay7389 4 жыл бұрын

My doors hadn't been off in 2 years, and taking them off was a little tough. I did the wiggle method to break loose and help get some internal lubricity but that didn't do the trick. I looked around for some lubricant but all I could find was some gun oil with teflon in it. Applied it to the hinge creases and did some wiggle again, and they came off much easier. I will have to check out the inserts you demo'd though as a long term solution

@robhicks3812 6 жыл бұрын

You always make great videos and you had me convinced until I went to their website to order a set. $50 bucks for 8 little plastic tubes, and thats the reduced price! I'll check the site every now and again to see if they reduce them to something more affordable. But keep making these great videos.

@AllTerrainFamily 6 жыл бұрын

I had read that it was Wing Deicer, but Wikipedia says you're right.. Also, the old CJ jeeps were metal on metal hinges with no lining.

@johnsullivan9819 6 жыл бұрын

CPO, love you videos! I put a set of these in on my 2017 JKUR and they are definitely worthwhile. One thing I have noticed is that i can see rust forming at the top of the hinge where i have put the delrin insert. Right from where the old hinge liners folded over at the top. Obviously its due to the paint being slightly removed I’d imagine. Did you notice this too, and if so what was your solution? I am thinking just grabbing a touch up paint pen.

@smartassjeff1 6 жыл бұрын

Was looking for delrin liners and almost got these. THEN I saw that the Kentrol brand is only $32.99 with tool for JKU. 4WP carries them. Saved me $20!

@o3djeeps 6 жыл бұрын

smartassjeff1 I hope they work great for you!

@roshjunaguon5154 4 жыл бұрын

Like a true man...”my strategy is not to hit the paint”... BOOM!!!

@deborahszymanski5474 11 ай бұрын

Your awesome 😎!

@mikeguitarification 6 жыл бұрын

Installed these today, used your videos for tips and tricks, (including jacking up the doors that were stuck). Quick question on the liners, any chance they fly out of the hinges when the doors are off and you are driving at higher speeds?

@chrisspence3616 6 жыл бұрын

I've had these liners installed for about a year and I removed my doors like I put them on yesterday. No problems, ever. What kind of stand do you have your doors sitting on for the summer? Is that PVC?

@theundead1600 2 жыл бұрын

Patience is also a important

@thomassylvestro9041 Жыл бұрын

So Awesome thank you so much for showing us how to get it done when things are not so perfect. I am in the same position. No way to hit up from the bottom

@Zombielunchbox Жыл бұрын

Man yours came out WAY easier then mine 😅 I had to realign a hinge or two 😂 also I found it way easier to go through the top on just about all of them!

@JeepTJWheelin 6 жыл бұрын

Got these last Fall, but I still have trouble each Spring getting the doors to budge. But once you do that first time each Spring, it gets easier.

@wilson8378 3 жыл бұрын

Same thing for me. The original liners were falling apart so I needed these anyway, but they haven't helped. The fronts come off, but the rears get stuck. Even trying to remove the doors immediately after putting them back in, they don't want to come back out.

@mrderek800 5 жыл бұрын

@o3djeeps [ OVERCLOCK3D Jeeps ], when you ordered the bushings did the hat and the shirt come with it or did you order those also? Also, what kind of lubricant do you recumbent using for the delrin bushings?

@bigtrailcde 5 жыл бұрын

Hi CPO.. What is the brand and model of that side steps?? I like them

@unwrangler11 6 жыл бұрын

Nice instructional video with real deal glitches thrown in.

@loriadars 11 ай бұрын

Do you recommend taking the guides off and replacing with hinge bolts after the door is on?

@Bluemoonrealtygroup0617 4 жыл бұрын

I had the same tool you show in the video and none of my four sleeves would budge no matter how hard I hammered. So, had to drill each one out. And, that took about 4 minutes hole per hinge. No idea why Jeep used aluminum.

@mikeguitarification 6 жыл бұрын

How long were those OEM liners in your Jeep? Mine is a little over a year and I am contemplating doing this.

@TheBeardedJeeper 6 жыл бұрын

Great video! I need to go doorless more this year

@o3djeeps 6 жыл бұрын

I'm definitely planning to keep them off as much as I can this year!

@TheBeardedJeeper 6 жыл бұрын

o3djeeps [ OVERCLOCK3D Jeeps ] I just gotta get some good mirrors

@o3djeeps 6 жыл бұрын

My motorcycle mirror has served me well this entire time, kzfaq.info/get/bejne/aq1nerionNS-dXU.html With that said, I am going to be reviewing some mirrors from americanoutlawjeepparts.com/ soon. I hope.

@TheBeardedJeeper 6 жыл бұрын

nice I can't wait for the video

@mkejdo 6 жыл бұрын

Hey, CPO! Been watching a while now, and I don't recall what sliders those are. What are they? Thanks for the vid. I'm about to put my Delrin pin liners in this weekend or next. Forecast here sucks, so probably next weekend. Thanks, again!

@o3djeeps 6 жыл бұрын

John Doro So these are the Rock Hard 4X4 Boat sides.... Here's a hint for the futue. You can always search my website for keywords.... Like "sliders" in this case, and see all videos dealing with that topic. I use it myself all the time to find my own videos! Lol o3djeeps.com/?s=Sliders

@dominicgrasso8970 3 жыл бұрын

I had issues with the bottom hinges also, I just took off the hinges and put them in a vise. Put some heavy duty gloves over the jaws of the vise so I wouldn't Marr up the hinges.

@bryancooper8201 Жыл бұрын

After 5 years how are these liners holding up ?

@esurles1 7 ай бұрын

My copper liners are giving me more problems then the stick ones did I hope eventually the doors will come off with ease

@joeverastegui8399 3 жыл бұрын

Make an erasable mark so you can line up the base when re-install, take off the hinge base ( two or three easy bolts) and do it in a vice.

@Zombielunchbox Жыл бұрын

Just finished. If I would have thought of this sooner this is the way to go for sure!! Lol

@SWBCrawler 6 жыл бұрын

GENIUS! Could have removed the hinge on the lowers, put it in a vice or something.

@o3djeeps 6 жыл бұрын

SWBCrawler I think much easier just to use the screwdriver imho

@samjohnson2801 3 жыл бұрын

My strategy! A rubber mallet

@benharris6088 5 жыл бұрын

rubber mallet maybe?

@goolemartin 6 жыл бұрын

Hello superbe mes moi pour les retirer je aurais utilisé un perceuse sans fil avec un mèche de 12mm pour éviter de les taper avec un marteau 🔨 avec le choc tu risques abîmer tes paumelles sur montants portes 👍😘

@DD-Aerial-Photography 6 жыл бұрын

Don't use WD40, use MotorKote. Can be found at Meijers. Its a great lubricant

@o3djeeps 6 жыл бұрын

TheIndianahurricane I wasn't using it as a lubricant. Thanks tho.

@DD-Aerial-Photography 6 жыл бұрын

o3djeeps [ OVERCLOCK3D Jeeps ] I know, I was just recommending MotorKote as a lubricant, it's great stuff. Doesn't wash off like wd

@MachitoLFC 6 жыл бұрын

Love your channel, but you overpay for some of your products (this one for sure- and your rain cover). I did my liners for less than $30 with the tool included too. Even quadratec has em for $30. Keep up the fun/helpful videos. BTW...did trail cams like you did. It was awesome.

@harrelsontrumpets 2 жыл бұрын

The tool included with the TMR kit is worthless. I had to turn mine down .003" to get it to fit only to discover it's definitely the wrong tool for the job! It took me 43 minutes to remove the hinge liners with the TRM tool, after it was turned down to the correct size. I had to remove the hinges from the Jeep and hold them in a vise with soft jaws to continue this job. After removing shards of aluminum, the liner, I realized why this doesn't work very well. The aluminum corroded to the point that it was galling when tapping out with the tool. For the next door, I used a 31/64 drill, and the liners came out in a few seconds, which was less than a minute total for that door. TMR should really film a proper video and write better instructions. And they should probably stop offering that tool and offer a stub drill bit instead.

@SWBCrawler 6 жыл бұрын

Your channel is not good for my wallet.

@JeepTJWheelin 6 жыл бұрын

Great comment

@camilouribe4291 6 жыл бұрын

Buy a Prius

@JeepTJWheelin 6 жыл бұрын

Camilo Uribe Life is too short to drive a shitbox and besides my kids won't remember 50 miles to the gallon. Jeeps are measured smiles by the miles.

@SWBCrawler 6 жыл бұрын

Camilo Uribe a Prius is not compatible with my way of life.

@JeepTJWheelin 6 жыл бұрын

SWBCrawler It shouldn't be compatible for anyone, well maybe little old ladies.

@talezfromthedashcam3138 6 жыл бұрын

I'm gonna throw the BS flag on this one. I have the Delrin liners and this is my horror story. I decided to replace my sleeves with the delrin liners. Well, the stock inserts are $h!t and I would up bending the driver door trying to replace it. 300 bux later at the body shop, I got my door fixed and the liners in. End of story. No. Last week my hinges start creaking, back to the same old $h!t today. using the jack to work the door loose. Not supposed to happen with the Delrin liners. Removed the doors with much pain and added lithium grease to the pins. No noise but they are still tight. I tried to lift off a door after all this and they are still tight. If anyone can tell me what I am doing wrong, I am all ears....

@Hopefaithguns 6 жыл бұрын

Talez From the DashCam I’ve had the same problems, even with the delrin inserts. Haveing short fenders does not help. I don’t care what anyone says... the hinges fill with fine dirt from daily use and cause the doors to stick, squeak and be a PITA to get off