No-Weld/No-Sew DIY POP-UP Camper Walkthrough

No-Weld/No-Sew DIY POP-UP Camper Walkthrough | KIT Campers V2

Рет қаралды 323,031

Күн бұрын

Here it is! KIT Campers V2!
Enjoy a walkthrough of the no-weld no-sew DIY POP-UP KIT Camper that I created for $4000, in less than 12 weeks, weighing about 400lbs.
Interested in building your own? Check out the V2 BOM and the Kit Camper Classroom, a living build guide, which provides you with everything you need to customize, order, and build your very own camper!
Find out more at the KIT Campers Website: www.KitCampers.co/theclassroom
This build is the culmination of everything I learned while creating the KIT Campers Prototype. This camper features a full-length tent, all aluminum composite material, and as much integrated 8020 aluminum support structure as possible.
KIT Campers aims to make DIY camper building more accessible than EVER. Not only do I plan to offer full build support (through how-to-guides, videos, and a forum); and all the parts you need, delivered directly to your door, but I want to build a community of DIY adventurers dedicated to getting out there!
Leave me a comment! What do you think of the camper and the KIT camper concept?
Share this with someone who you think is interested in building their own camper!
My Instagram: / kit.campers
Chapters
00:00 INTRO
01:28 COST
02:35 WEIGHT
03:14 ASSEMBLY
03:59 PANELS
05:08 GAS STRUT MOUNTING
05:41 GAS STURT SPECS
06:04 SLAM LATCH MOUNTS
06:31 WEDGE OR POP-UP?!
07:36 CANVAS DETAILS
08:41 MOUNTING THE CAMPER TO THE TRUCK
09:16 INTERIOR
10:16 SLEEPING PLATFORM
10:53 BED SET UP
11:23 POP-UP MECHANISMS
12:10 WOOD VINYL FINISH
13:00 FUTURE PLANS
13:21 OUTRO
Previous Builds
Prototype Camper • No Weld DIY POP-UP Cam...
Inspiration
@Ripcordhq DIY Wedge Camper - • DIY Wedge Camper | Wal...
@TimMorrissey Pop-Up Mechanism - • DIY Four Wheel Camper ...

Пікірлер: 536

@tinkerstrade3553 2 күн бұрын

I've been looking at a similar idea. But instead f canvas, I'll make fold up hardsides for the insulation value. I'm going old school with 4 each, 12v marine batteries, plus isolated truck battery, with a cutoff switch. Naturally, I'll install solar panels where I can, hopefully enough to keep the camper supplied. I have my eye on a wrecked pop up camper that I can get cheaply, to use the appliances from. Then convert that trailer frame into an enclosed utility unit to carry my home built EV 4X4. As a metal detectorist, this will allow me to camp, and have trail mobility. (The reason I want a little electric buggy is the noise value. It's a lot easier to see wildlife without a lot of motor noise.) I really enjoyed the video. Using extruded aluminum hadn't occurred to me, as I was intending to use angle iron. Since the build will be on a vintage Ford Ranger, weight is important. (Though I intend to put hub motors on the trailer to give just a wee bit of assistance. All in all, I'm shooting for a $2.5K cost, including the pop up. I'm subbing, to steal your ideas. 🤣

@KitCampers 2 күн бұрын

That sounds like an awesome idea! I will say, I hope you can get all your parts for your given budget, with the way this build is buying everything new it was around $4k. But I think if you are savvy about getting used or material that isn't really challenging to get like VHB and ACM then I think you should be able to do it.

@bigrigcook7322 Ай бұрын

My favorite part??? Lol when your fiancé is trying to hide in front of your truck and then on the side of it as you're coming around!! Priceless!!😂😂😂 But the build is the best I've seen!! Great job brother!

@KitCampers Ай бұрын

Hahahaha yes, she wasn't too subtle, and the truck being recently cleaned didn't help with the stealth. LOL. Thanks for the kind words I really appreciate it!

@peterpayne2219 8 күн бұрын

Very cool, now do this in a Cybertruck!

@KitCampers 8 күн бұрын

The geometry of the cybertruck would make it VERY challenging to get a solid frame. Plus I don't have one. But if someone wants to give me a cybertruck and the ability to machine all the custom parts I would be happy to do it.

@coltonkley3514 Жыл бұрын

Great Build with a balance of cost, TIME involved, and important practical features

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@kjw1856 Жыл бұрын

I love it… off center pop up mechanism and all! You are inspiring and your enthusiasm is palpable! Peace and peaceful travels

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@LBforTRUTH 7 күн бұрын

Nice work!! Looks great 😎, love the final wrap.

@KitCampers 7 күн бұрын

Thanks I appreciate it!

@stevewessels2562 Жыл бұрын

I just need to build the top portion, the Pop up part. I want to build it on top of the existing fiberglass top, on my '93 Ford Bronco. From the windshield to the back is 8',but I might extend it to 10', towards the back, which is about the distance with the tailgate down. So if I don't have enough room in the 5' bed of the Bronco, I might make a temporary/removable shower/toilet on the tailgate.

@KitCampers Жыл бұрын

Nice! Sounds like a pretty slick idea!

@jerrystark6766 3 ай бұрын

Aluminum t-slot frame railing and fasteners are by no means inexpensive, but they are a a delight to work with. Assembly will be quicker and the end result will be as strong as a bridge. Great camper. Well done! ✔✔

@KitCampers 3 ай бұрын

Thanks! Yes I agree, the pieces are SO strong, and with the correct fasteners they are super sturyd and vibration resistant!

@floridarolf759 Жыл бұрын

Just props, I’m simply amazed! Simple, rugged, repairable, it ticks all the boxes. Keep up the great work!

@KitCampers Жыл бұрын

Thanks for the kind words, I really appreciate it!

@zerocool2352 Жыл бұрын

This is super cool and exactly what I'm looking to do. I built a roof tent rack using 2040 extruded aluminum and it's held up pretty well except for one of the aluminum beams broke as a result of being twisted from spreading out under load. Without having some kind of "lip" to press against the interior of the top of the truck bed, weight pushing down can cause the structural supports to push outwards. Looking at your video, I'd recommend adding a strip of aluminum along the entire bed length to prevent your frame from getting pushed outwards.

@KitCampers Жыл бұрын

Thanks for the heads up! I added some angle aluminum to the bottom of the rails and then some bed rail stiffeners to the truck bed so I haven't had any issues

@MartinPiloCorrea 9 ай бұрын

Love the simplicity of your design, thanks for sharing

@KitCampers 9 ай бұрын

Thanks I appreciate it!!

@miguelvalenzuela Жыл бұрын

amazing!!! thanks so much for making this video!! My favorite part is how simply it is build with the 8020 material.

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@fb1966ec Жыл бұрын

Congratulations man! I can really see your improvements and hard work! These looks legit! Keep on! Good job!

@KitCampers Жыл бұрын

Thanks I really appreciate it! I am super excited about all the improvements that I made to this one, and definitely learned a lot from this build too

@sublimeister9630 7 ай бұрын

Great light weight build. Clamping it to the truck is something new. Very nice. 👍

@KitCampers 7 ай бұрын

Thanks I really appreciate it!

@johneden7975 Жыл бұрын

Bro, I couldn’t agree more; Aluminum extrusions are legit! Keep that brain working, mechanical design of this. Is real nice, nice work👌🏼

@KitCampers Жыл бұрын

Thanks I really appreciate it! And yes the aluminum extrusions are amazing, I have some many ideas!

@OutOfOfficeCamping Жыл бұрын

Great build. So wonderful that your so happy to help an share. That's the kind of stuff we love to see and watch on KZfaq. We also love finding the little channels. Mark (& Teresa)

@KitCampers Жыл бұрын

Thanks for the kind words! I really appreciate it.

@OutOfOfficeCamping Жыл бұрын

@@KitCampers 🙂

@archivegarage7638 Жыл бұрын

Nice build, I appreciate your drive to make building it easy without specialized skills

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@GrahamFielder Жыл бұрын

Awesome build! Stoked to follow along and see where you go with these designs

@KitCampers Жыл бұрын

Thanks, I appreciate it! I definitely have some big plans in the works!

@jennyoden7076 5 ай бұрын

I just might diy my pop up when I’m ready for it!! Thanks for this explanation & demonstration!!!

@KitCampers 5 ай бұрын

Of course! Glad you enjoyed it!

@daveandsonyainmichigan Жыл бұрын

Nice job! I love using the 80/20.

@KitCampers Жыл бұрын

Thanks! Its great stuff!

@warrenmcdevett8581 Жыл бұрын

Awesome! I'm in the design phase of some very similar. I'm looking at using a cold mold fiberglass process. I like your set up. U r on to something good that doesn't cost a fortune.

@KitCampers Жыл бұрын

Thanks I really appreciate it! I have looked into fiberglass, but without a nice clean garage/workshop, I think it would be VERY tough to manage.

@HAXMAN Жыл бұрын

Very cool and nicely done. I've been thinking about making a camper for a while and this looks doable.

@KitCampers Жыл бұрын

Thanks I appreciate it! The goal was to make camper building accessible to people so I am happy to hear that!

@freeinFL 4 ай бұрын

You have provided such valuable info! Love that you intend to publish plans to save folks money. Thank you! This is really awesome!

@KitCampers 3 ай бұрын

Thanks I really appreciate it! Plans are published online here - www.kitcampers.co/theclassroom

@roncoleman6693 10 ай бұрын

Helped a buddy build something similar to your build. Made some screen inserts that had magnetic strips in them when he opened up the sides like yours. Kept the skeeters out on some campouts. Great build buddy ! 😎👍👍

@KitCampers 10 ай бұрын

Yeah, that's exactly what we do to block the windows when camping. Thanks, I really appreciate it!

@felixcat9318 Жыл бұрын

A very inspirational build, a no nonsense, cut to the chase approach to creating a high quality, lightweight pop top camper kit that addresses the issues for most buyers! And those issues are no welding and no sewing, as these are the two main specialist skills that most people simply do not have, and which cost a huge amount to contract out. You've created a very high quality, very highly desirable camper, which just keeps on getting better the more one sees of it.

@KitCampers Жыл бұрын

Thanks for the kind words! That was the goal of creating the camper.

@Tsiri09 Жыл бұрын

Don't weld, but DO sew.

@KitCampers Жыл бұрын

@@Tsiri09 the non-sew seems have been holding up VERY nicely, I definitely think adding sewn seems would make it even more sturdy though

@bkny Жыл бұрын

Thank you for sharing this. This is sick! One of the best DIY in KZfaq! Wow.

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@FrankFish-rw2yh 8 ай бұрын

No doubt, great job. I have a 68 bronco looking to do something like this, thanks for the ideas!

@KitCampers 8 ай бұрын

Something like this would look awesome on a bronco! Best of luck and let me know how I can help!

@joecomyns5120 Жыл бұрын

Looking really good, I've been nibbling away at the idea of building something along these lines for a while, but the lack of sewing skill and equipment has been a major roadblock and contracting out, just too costly. Your vinyl welding idea has got me thinking all over again. Thanks!

@KitCampers Жыл бұрын

No problem! Glad to see that the gears are turning, if you have any questions about the canvas or other parts of the camper let me know!

@michaelarthur2362 Жыл бұрын

If you had a instruction and materials list would be amazing

@KitCampers Жыл бұрын

@@michaelarthur2362 I do, it's all in The Diy Build Classroom at kitcampers.co/theclassroom

@benkeppler6869 7 ай бұрын

Really nice set up! How about bolts rattling loose? I am interested but my concern is run roads and wear

@rickysiebert9618 Жыл бұрын

This video has my mind racing. Am contemplating the purchase of the new AWD Ford Maverick, and a small fiberglass camper. Would be using the camper as a “home base” for exploring the country. If I got caught out too far from returning, a small topper like this to spend the night in a remote location would be ideal. Currently there are none being manufactured for the 4-1/2 foot Maverick bed. Making my own with 2 to 2-1/2 feet over the cab would be enough to sleep comfortably up top. Hmmmmmmm……..

@KitCampers Жыл бұрын

Yeah I definitely think it's doable but there might be a few complications. I think currently most manufacturers don't build for the maverick for a few reasons, 1) it's pretty small and new, and 2) the geometry isn't very nice, in terms of trying to get everything to fit. I am sure you could get it to work if you put some thoughtful design into it though! Let me know if I can help!

@suburbanrebellion6880 Жыл бұрын

Very impressive. Ill probably be looking up aluminum stuff all night

@KitCampers Жыл бұрын

Thanks! If you have any questions let me know, I am happy to help where I can.

@aljeeper3292 9 ай бұрын

Love it, great design and it looks very well engineered 👌🏻👍🏻

@KitCampers 9 ай бұрын

Thanks I really appreciate it!!

@othoapproto9603 7 ай бұрын

Wonderful video, thanks for the tour, great JOB. I've been working with 80/20 for 30 years and love it. However, I pass it by for my build due to the cost but mostly 80/20 is so HEAVY!. I wish they would make a lighter grade. Carbon fiber T-slot stock would be a dream, but man would that be pricey!

@KitCampers 7 ай бұрын

Thanks for the kind comments. Yes it would be awesome if they incorporated some carbon fiber, but it would be SO expensive.

@fordford1827 Жыл бұрын

Very impressive topper. Although there are a few tweeks to make it perfect, your design is excellent. I do lots of diy projects myself and this is something i would consider. Next maybe fab and bolt up a 270° shade.

@KitCampers Жыл бұрын

Thanks I appreciate it! I completely agree that there are a few tweaks that should be made in order to make things even better. What are your suggestions for tweaking the design? I mounted a prebuilt 270 awning directly to the rails of the camper, I don't have welding skills but it's something I want to learn so I can eventually build one!.

@driftlessheights6177 Жыл бұрын

This camper is brilliant and simple. Congratulations! Also a special thankyou for specifying the weight. Most KZfaqrs don't do that. Would be interesting to replace the panels with pink foam wrapped with carbon fiber. That would be even lighter. Would also be good to see someone deal with the aerodynamic problem created by the portion over the cab. Great work though!

@KitCampers Жыл бұрын

Thanks I appreciate it! I try to be as open about the design as possible to give people the most realistic expectations! You could try carbon fiber or fiberglass (but you may need special epoxy to make sure you don't eat away the pink foam). No way around it, all cab overs result in some level aerodynamic issues but I am working on a semi solution for the cab over right now! Will definitely be testing the differences in gas milege before and afterwards.

@derrickbell8745 Жыл бұрын

Great job. I love the craftsmanship

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@OC-OUTDOORS Жыл бұрын

Very nice looking unit! Would love to see a video of how the process of popping it up and down works.

@KitCampers Жыл бұрын

Yeah, I think I will make a short video detailing that, i have some videos on my instagram that show it but not in super great detail.

@plasticAudio Жыл бұрын

Incredible. Beautiful job.

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@canceled1111 Жыл бұрын

Great job on this build. Looks solid.

@KitCampers Жыл бұрын

Thanks I really appreciate it!!

@mrblackgabe Жыл бұрын

Love this idea. Seems like the back would really benefit from some triangle gussets in the corner of the frame.

@KitCampers Жыл бұрын

Yeah you could very easily add some bracing to those corners. I have been considering it just for the added peace of mind, but so far I haven't had any issues at all.

@5664788 Жыл бұрын

love the way it opens up,.....sure beats the others that start at $10,000,.......great job!!

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@spf4x4 Жыл бұрын

So easy and simple, great setup.

@KitCampers Жыл бұрын

Thanks! I really appreciate it!

@Jack-ne8vm Жыл бұрын

Great idea. Join with neighbors to multiple builds! 2:40 I kept being happily distracted by reflections!

@KitCampers Жыл бұрын

Thanks! Hahaha I totally didn't see the reflections until you pointed them out 🤣 pretty funny though, we were trying to keep the dogs on a stay command!

@CaptainFALKEN Жыл бұрын

Black 09 DCLB sport here too. Same wheels. Best one!

@KitCampers Жыл бұрын

Heck yes! The wheels I bought off of someone who had them on a forerunner previously, but I absolutely love the entire truck!

@Roamingloba Жыл бұрын

I’m definitely saving this video!!!

@KitCampers Жыл бұрын

Heck yeah! Thanks for the support.

@cksmith007 Жыл бұрын

Wow!!! That looks great. I wish you would have showed the setup/teardown of it though.

@KitCampers Жыл бұрын

Thanks I appreciate it! I have another video of the set up - kzfaq.info/get/bejne/f6mJe8dn36-ofmg.html check it out and let me know i fyou have any questions!

@pv4083 10 ай бұрын

Man….people are Amazing. Great job

@KitCampers 10 ай бұрын

Thanks I really appreciate it!

@malcolmnicholls2893 10 ай бұрын

Nice clear presentation. Thanks,

@KitCampers 10 ай бұрын

Of course, glad you like it! Let me know if you have any questions.

@hellbryan1299 9 күн бұрын

Much better than those super expensive Roof top tents.

@KitCampers 8 күн бұрын

Thanks I appreciate it!

@RW-ze6su 10 ай бұрын

Love the concept. Thanks for building some of ideas I have had.

@KitCampers 10 ай бұрын

Thanks, I appreciate it! I have some even better ideas to come!

@manuelwebe Ай бұрын

Great job! I have the same truck & may be someday will engage in a similar project . Thanks for sharing 😊

@KitCampers Ай бұрын

That's awesome! If you have any questions let me know!

@sandyschneider6792 Жыл бұрын

Looking fir your DIY build kit. Thank you. Amazing job!

@KitCampers Жыл бұрын

That's awesome the build guide is available at www.kitcampers.co/theclassroom just a heads up I only sell the build guide and not the parts. But the guide has a list of all the materials you will need to build a camper.

@scubasteve4093 Жыл бұрын

This really seems like a game changer. Seemed like for years campers kept getting more and more complicated and pricey. Only serving the very wealthy. This seems like an option that a lot of us who have just been making it work for the love of it an option to live more comfortably :)

@KitCampers Жыл бұрын

Thanks that’s the idea! I appreciate the kind words!

@ericschmidt3759 Жыл бұрын

I love this! Thank you for sharing. I'm on a limited income and will join the class as soon as I can. I have ideas to add to this.

@KitCampers Жыл бұрын

That's awesome and thanks for the kind words I greatly appreciate it. I look forward to seeing you int he classroom!

@craftsmancollaborative Жыл бұрын

Yewww!! Great to see another accessible camper build out there 👀

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@jakemaughan3818 Жыл бұрын

Oh yea, you have come a long way. Glad you upgraded the audio :) I think you have an amazing product on your hands.

@KitCampers Жыл бұрын

Thanks man I really appreciate it! Yeah the lav mics are definitely a game changer!

@MobileDwellings Жыл бұрын

Very cool. Thanks for sharing.

@KitCampers Жыл бұрын

No problem! If you have any questions about the build let me know!

@pywacketturtle-swain7353 Ай бұрын

good stuff, thanks for sharing!

@KitCampers Ай бұрын

Thanks for watching!

@user-vw6ej7ib5c Жыл бұрын

I wish I could do something that nice. You are very talented

@KitCampers Жыл бұрын

Thanks I appreciate it!

@mikemelroy1424 Жыл бұрын

I like it, the more simple things are to do the better is what I say. That would be cool if you could somehow use the same type of pop up mechanisms for the sides as well. That way you could have extra storage/counter space.

@KitCampers Жыл бұрын

That's a good idea, maybe I can think of way to make that work for version 3!

@GOLDVIOLINbowofdeath 9 ай бұрын

What?

@slmjake Жыл бұрын

Very practical approach! I subscribed!

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@joer1757 4 ай бұрын

Amazing job. Thanks for sharing this

@KitCampers 3 ай бұрын

Thanks I really appreciate it!

@tiennguyenfamily Жыл бұрын

awsome design, thanks for nice video

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@hueyolson7577 Жыл бұрын

Marvelous, quite inspirational…

@KitCampers Жыл бұрын

Thanks I really appreciate it.

@Resurrectionaudio Жыл бұрын

this is such a great build

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@11bangbang84 Жыл бұрын

Well done

@KitCampers Жыл бұрын

Thanks, I really appreciate it!

@robertatkinson1157 Жыл бұрын

I would love to see a video of you putting the top up and down !

@KitCampers Жыл бұрын

I actually am uploading one as I type this message, so it's coming soon!

@mundodebandeirante Жыл бұрын

very good your videos. I'm building a camper and the information is very important.

@KitCampers Жыл бұрын

Thats great to hear! Let me know if you have any questions!

@evanl5299 9 күн бұрын

Awesome build. I was really hoping you'd demo the pop top going up / down and how you built it with those struts. How sturdy it is etc

@KitCampers 8 күн бұрын

Thanks I appreciate it! I made a follow up video that demos this - kzfaq.info/get/bejne/f6mJe8dn36-ofmg.htmlsi=UMxAcy4puAXEVgoC

@PA96704 Жыл бұрын

Nice. I was gonna get a aluminum lumber rack and do the same. Awesome build!!!!

@KitCampers Жыл бұрын

Thanks! And yeah I thought about that too, unfortunately, I wasn't able to find an aluminum lumber rack that fit my specs exactly. Let me know which one you end up going with!

@bucklundie Жыл бұрын

Great design

@KitCampers Жыл бұрын

Thanks I appreciate it!

@Adv4x4 Жыл бұрын

Awesome video man! I’m considering something similar for my next build on the channel so it’s nice to get some ideas from your build! Subscribed👌🏼

@KitCampers Жыл бұрын

Heck yeah! Glad I could provide some inspiration! Let me know if you have any questions!

@dansbuilds Жыл бұрын

Awesome work on the lift mechanism 👍

@KitCampers Жыл бұрын

Thanks! I think that was the single most challenging thing about the entire build!

@dansbuilds Жыл бұрын

@@KitCampers Found it to be the same for my one haha so stoked when it worked

@KitCampers Жыл бұрын

@@dansbuilds Yeah same! The wedge seems so much easier but leaves so much to be desired.

@lawas99 Жыл бұрын

great! thank you for sharing and greeting from Indonesia

@KitCampers Жыл бұрын

No problem! Thanks for the kind comments!

@206deeznutz 10 ай бұрын

Great idea. Wish you would have filmed when you popped up the camler to see how that is done.

@KitCampers 10 ай бұрын

I filmed a walkthrough of the roof in another video - kzfaq.info/get/bejne/f6mJe8dn36-ofmg.html check it out and let me know if you have any questions.

@fastgurrrl Жыл бұрын

Dude. Way to go man. That is so awesome. Sub'd.

@KitCampers Жыл бұрын

Heck yeah! Thanks for the support.

@kfkf1922 Жыл бұрын

this could really be quite revolutionary for those who are diy interested. you should make some good money off your plans as the idea and timing should be pretty nice. i wish you the best of luck!

@KitCampers Жыл бұрын

Thanks! I really appreciate the kind words. That's the hope, but I really want to focus on helping making DIY camper building as accessible to people as possible.

@alexlowry952 6 ай бұрын

This is great.

@KitCampers 6 ай бұрын

Thanks I really appreciate it!

@maryelizabethwilliams7037 Жыл бұрын

So cool

@KitCampers Жыл бұрын

Thanks!

@marshacowan1252 Жыл бұрын

Love it! Some clever ideas! Got a couple of questions? What do you do in the sleeping area when it rains? Are there covers for the windows? Also, I would have loved to have seen it fold down. Nice build!

@KitCampers Жыл бұрын

Hi Marsha, thanks for the kind words! We have been fortunate enough not to have any crazy rain so far, but I have made some updates to the canvas in terms of adding window covers and some see through windows as well., I am still working on a solution for velcroing the windows up but for the most part it works really nicely. I have a video of opening and closing the roof here - kzfaq.info/get/bejne/f6mJe8dn36-ofmg.html

@irh71ful Жыл бұрын

Nice and simple idea...

@KitCampers Жыл бұрын

Thanks I appreciate it!

@Martin-xb2rz Жыл бұрын

Thanks I am planning a pop top for my 99 e350 4x4

@KitCampers Жыл бұрын

Nice! If you wait approximately 2 weeks, I have some really cool pop-up design videos coming!

@Martin-xb2rz Жыл бұрын

@@KitCampers I will wait 😉

@tombrownrigg8794 8 ай бұрын

Nice work👍

@KitCampers 8 ай бұрын

Thanks I really appreciate it!

@NodoeJOP 9 ай бұрын

love the layout…. great video

@KitCampers 9 ай бұрын

Thanks I really appreciate it!

@NodoeJOP 9 ай бұрын

@@KitCampers the reinforcement pieces for structural integrity really play a huge role for functionality during windy conditions, i like your incorporation of those pieces even though there a strange shape… id be interested to create one of these for a mini truck, like a kei or suzuki ; i found your channel because ive been looking at diy mini truck campers; and i think your design increases the functionality of a normal box camper… really well done! definitely will reference your video when approaching my own build..

@douglasvamateurradioandmore 10 ай бұрын

I like this alot. I am looking at 8020 extruded and the composite to keep the camper light on my 2021 f150 lb.

@KitCampers 10 ай бұрын

Thanks! How long is the long bed? If it's longer than 8' you might run into some expensive shipping for the aluminum extrusion (anything longer than 94" can get really expensive). Let me know if you have any questions!

@douglasvamateurradioandmore 10 ай бұрын

@@KitCampers 8 ft. I will have to measure when I get home for exact lengths.

@shakyhandpictures2185 9 ай бұрын

Nice!

@KitCampers 9 ай бұрын

Thanks I appreciate it!

@Highlander.7 Жыл бұрын

A very well thought out and presented build. I most appreciate you being a resource ! The modular and easily replicated design is for sure my favorite part. many blessings and thanks!

@KitCampers Жыл бұрын

Thanks I really appreciate that!

@Highlander.7 Жыл бұрын

@@KitCampers i believe you mentioned a maker's forum for sharing additional build ons and improvements, progress of their own build, etc. sounds like an awesome resource to normalize nomadic living and make it accessible. As a California resident i see a lot of really run down ragged pieced together campers as a result of the 3rd world [or worse] housing situation. this kind of diy design network is invaluable. much love and thanks brother

@KitCampers Жыл бұрын

@@Highlander.7 Thanks I appreciate that, now even a truck cap, sold new is $4000 so it's crazy that even that is becoming almost unaffordable to people now.

@GOLDVIOLINbowofdeath 9 ай бұрын

Modular?

@Highlander.7 9 ай бұрын

@@GOLDVIOLINbowofdeathI would say so, yes. This design is easily adaptable to suit one's needs.

@idahoman325 Жыл бұрын

Great camper & look forward to seeing how you go about setting forth on storage & organizational lay outs. If that was your dog chilling under the table maybe ya know next time include him along with ideally showing your build in action pop up roof wise. Did you install racks on top for additional carry options for bikes or a standup board or ?

@KitCampers Жыл бұрын

Thanks I appreciate it! I am definitely working towards some better drawer systems, etc. if you're interested in a roof walk through check this out - kzfaq.info/get/bejne/f6mJe8dn36-ofmg.html . I did add some roof rack options they are super easy to install, just working on getting a parts list together.

@lachlanm3439 Жыл бұрын

Excellent basic platform. Work in progress, like to see in a couple of years after..."gee, we can do this and add that and...." great for modifying as you go forward. Just one question about keeping the rain out on the pop top? Thanks for sharing your effort.

@KitCampers Жыл бұрын

Great question and thank you for the kind words! Right now the massive windows are not conducive for keeping the rain out I am currently working on making some window covers out of tinted clear vinyl. I just haven’t had a chance to finish them yet

@Tsiri09 Жыл бұрын

I would love to build this!

@KitCampers Жыл бұрын

You definitely should give it a shot! I do have build plans available at kitcampers.co/theclassroom if you are interested in more info

@patrickmckowen2999 Жыл бұрын

Excellent 👍

@KitCampers Жыл бұрын

Thanks I really appreciate it!

@rickt7425 Жыл бұрын

great build, well done! I was thinking of using 8020 for the my flat bed popup build. Is there much, if any, flex when there are 2 people in the bed? Also do you use any Loctite for the fasteners ie. to prevent loosening during those offroad trips? Offroad corrugations here in Australia are hell on anything and everything.

@KitCampers Жыл бұрын

Thanks I appreciate it! There is a little bit of flex in the pull out portion, but no flex in the overhang at all. I reinforced it quite a bit with 1 inch aluminum so its sturdy. I would recommend using loctite where ever you can but for me I generally use double anchor joins (which are VERY vibration resistant) I just drove 750 miles of back forest roads with no loosening. For non-anchor joins I would recommend using loctite and lock washers, once those are tightened down they seem to stay in place very nicely.

@elimaki4833 Жыл бұрын

Cool ideas

@KitCampers Жыл бұрын

Thanks I appreciate it!

@daviddyogi8279 9 ай бұрын

awesome shit!!

@KitCampers 9 ай бұрын

Thanks! I really appreciate it!

@amorton94 Жыл бұрын

Very interesting approach to monetizing this. I've had an idea for a universal kit for something since Overland Expo, but now I wonder if your model is a better way to start. I wish I was familiar with extrusion a decade ago. Seeing all the roof racks now that are little more than some 1/4" plates and some extrusions kills me in that I didn't think of it. Same can be said for these tents/campers. Looks good though. I like the no sew aspect since that's a large barrier with diy tents.

@KitCampers Жыл бұрын

Thanks I appreciate it! Yeah, I don't have the money to get everything together to actually sell people kits currently so creating the Classroom was, IMO the next best option. I have thought the same thing though about the 8020 extrusions and all of the bolt together roof racks and what not, those companies are really making a killing on them.

@joeymimekos Жыл бұрын

This looks awesome! Perfect for a sunny day at the beach or up in the woods. But is it waterproof? What If your caught in a rainstorm overnight.?

@KitCampers Жыл бұрын

Thanks I appreciate it! Definitely a valid consideration! I am currently working through some solutions for the windows to keep rain out, luckily we have not been caught in a rainstorm yet! But I will give everyone an update as soon as I figure out a good solution for the windows especially!

@jimbomac3668 Жыл бұрын

This is exactly what I've been looking for. I don't want to remove my tailgate or drill holes to bolt the camper on. I would like to add about 6" - 8" to the cab over to allow for 6' - 9' one piece fishing rods. Do you have a basic set of plans and links to where you purchased the materials? Fantastic build!!

@KitCampers Жыл бұрын

Hi Jimbo! You dont need to remove the tailgate or drill any holes to bolt the camper on. The enter roof is already 10' on a long bed so you would be able to already store some fishing rods if you wanted. I sell the build guide on - kitcampers.co/theclassroom

@ericschmidt3759 Жыл бұрын

do you have ideas on ways to cover the screens in inclimate weather or a way to winterize (Thermal Liner) the upper canvas part for winter? I love the big screen windows for ventilation and for a more open feel. Just wondering what you do if it rains or snows?

@KitCampers Жыл бұрын

Yeah, I am currently working through some solutions for that but think I have a decent idea actually. I will definitely update the build guide and instagram once its figured out. I am think about putting some retractable vinyl windows on the outside.

@warrenbenton9033 4 ай бұрын

Hello cool build. I see you gas struts are inside the frame. Do you have any details on how you did that? Could you put struts on inside of canvas? Cheers.

@KitCampers 4 ай бұрын

I wouldn't recommend putting them on the inside of the canvas, it is going to make it really hard to get the canvas in when the roof is down. I have this all detailed on my website within the build guide - www.kitcampers.co/theclassroom

@fordexplorer1012 Жыл бұрын

do you have a link to those slam latches? they rock. very nice build

@KitCampers Жыл бұрын

They are great! Just be careful cuz sometimes the lock mechanism gets a bit stuck. www.amazon.com/gp/product/B09ZKZ8S8Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1