I purchased these directly from Noble and installed these today. Please please please do not use a pry bar or a flathead screwdriver to remove the stock reflectors. I left several deep gouges that I could catch with my fingernail in the surrounding plastic after the screwdriver slipped and scraped the bumper. Rather, crawl underneath from under the center of the bumper, and look up towards the reflector. You should be able to see the clips holding the reflector in place. You can fish your arm up and pop out the clips with no damage to the plastic.

Waiting for this video long ago, thanks uncle Jim 🥳

Nice! Bought mine and thought making a video how to install them since there was none! Thanks and great product!

I had these on for a couple months, Installed them with your wiring harness that's plug and play. Now the left one burned out due to a defective LED. But as usual IIR comes through and is sending out a new set so we can get these back to the manufacturer to see what caused the defect for future product.

Installed the clear set yesterday, I’m pretty happy with them but they aren’t a perfect fit. If you’re super picky you may want to modify the holes just a little. They may sit in the area more flush. The wires sure seem pinched also. I have not tried this yet. The CLEAR SET does not have the C style light pattern. Instead it’s individual lights, you can see light pattern in the webpage but an on the car example should have been included in this video because it is different enough. Also I had to remove my bumper to install a ecohitch so removing the reflectors was super easy from behind. But I only mention this because I was able to see the light kit installed from behind. Although I pushed through in the lights into the holes quite hard I still had to get a small screwdriver to pull clips farther through to be completely locked in. Hopefully this can be done from under the car with bumper remaining on car. I DO NOT RECOMMEND TAKING OF REAR BUMPER UNLESS YOU NEED TO FOR ANOTHER PROJECT. I did a harness on each side, super easy but it is a bit more to tuck away behind lights. I found tucking them down was the best to fit taillights back to proper spot easily. I have a silver WRX and just didn’t like the red reflector on the silver cars for some reason. The bumper is a bunch of black and didn’t want to black it out creating more black but I do appreciate the clean look of the black ones. The clear lenses look good on the silver cars in my opinion. Hopes are that they will be sufficient enough light and I can black out taillights in clear lenses area.

Super simply!

That’s nice. 👍

I only want to use these for parking/brake lights. I would be getting the F1 light as well. I would only need 1 Noble harness since I'm not using signals?

Do you need to bridge both sides to do this? They only mention one aaid and acr like your done???

Stupid question, but what if you have the side marker lights too, I want these and those as well, I also already have an F1 light would they allow for connection of all three?

I need the harness link pls… I’ve got the rear lights already but they don’t come with the harness 🇦🇺 Subaru Impreza 2017

Just purchased the reflector kit :) would you recommend getting this also ?

Does this work with the Diode Dynamics tail as turn kit?

I have a 3rd brake like with a plug and play harness already, does use the existing plug or do I have to decide which one I want to use

Would these fit a 2011 WRX hatchback, seems like they have the same size reflector? I’m fine with having to make adjustments to the wiring

whats the carbon piece on the trunk lid? hope its for sale soon

you guys are more professional than this. right tools for the job. c'mon man (in the voice of Chris Berman/ESPN)

My reflectors came with a yellow wire instead of a white so i assumed its the parking and put the red for turn as well but any reason why the turn doesnt work with the lights on? It works if I have all the lights off it looks like its as bright as the parking light so it doesnt show it blinking , it does the same situation for the brake light too lights off work

Bridge extension necessary if i have the PNP harnes (1)? If so why dont thye mention it in the video?

Purchased but when I installed they did not turn on ?

Did not fit my 23 wrx 😢

How long is the rear reflector cable?

does the harness come in with 2 or just 1? I only ordered one and the description didnt say if its 2 or 1

DO NOT USE A SCREWDRIVER OR PRY TOOL LIKE IN THIS VIDEO! IT PERMANENTLY MARRED THE PLASTIC AROUND IT! Reach for the clips from behind. Your hand will reach. Still upset this ruined my bumper 😭 Would have to order a whole new bumper to fix it. And I'd have to get it ceramic coated again. Time and money 😢

Installed these exactly the way you did, does the blinker only work when the lights are off?? Mine don’t activate if I have my lights on but if they’re off the blinker works.

Still waiting on the dual exit exhaust

Does the harnesses on the website sell as a pair or in singles

Does this light have strobe brake mode also?