Nock Fit Knowledge- the Good, Bad & Ugly

No video

Nock Fit Knowledge- the Good, Bad & Ugly

Рет қаралды 23,670

Жыл бұрын

Nock Fit is such an important part of getting your bow to exceed your expectations. This little part of the arrow plays such a key role in accuracy and repeatability. In this video I walk you through what to look for and what to do to make sure you aren’t going backwards in groupings because of your nock fit.

Пікірлер: 50

@h2olove 11 ай бұрын

As important as this is, I’m blown away by how little information is out there on the throat size of nocks. I’ve even emailed some manufacturers, with no luck, asking about the size of their nicks. It seems like it should be as important as the arrow ID information.

@jcarry5214 18 күн бұрын

I would think some nerd would have a chart by now of string manufacturer, strand count, and serving material cross referenced to nocks by now. Color might even be a factor, I don't know. But that would depend on the nicks being consistent to begin with. I just bought a bag of replacement nocks for some Bohnings on a new set of shafts that don't work on my recurve even after heating and tweaking. So now I have 2 batches of gold tip 204 diamter nocks. the white ones fit snug but not too much, and they are consistent in height (length on the string.) The green ones are loose as a wet paper sack and vary slightly I think in height. I will try to pinch them, but what a bummer. I really like the GT design for trad bows. Meanwhile the Bohning double-click jobbies, I have some that are 5-6 years old and their fit is identical to the brand new ones I just got. Furthermore, the fit of the 204 are the same as the 246 ones. Who would have thought that a person might want to use multiple shaft diameters on one compound bow?

@h2olove 17 күн бұрын

@@jcarry5214 Right!

@stevenl4494 5 ай бұрын

Good teaching segment here. As I learned the hard way, you can have a $0.10 component screw up a $25 arrow. Many dont realize it. Bonus tip, inserts will do the same (screw up the arrow) with broadheads if youre not paying attention.

@Rollo-lq9jq 11 ай бұрын

THANKS A BUNCH!!! Checked fit on my Gas string of the 4mm microlite nocks and they are tight, some more than others. The lighted nocks actually fit looser and tried 3 for target practice and at 20 yds all bullseyes, 30 and 40 yards vastly improved. Can't believe I have been battle=ing this issue this long!!! YOU DA MAN!!!!! Blessings

@40beretta1 Жыл бұрын

I can not believe you did this vlog... Over the weekend I was tuning and sighting in and experienced a a "tight" nock throat shot, that went off to who knows where land.. I was stunned... worse. When I nocked on, and I heard the snap. The little voice in my head told me "that ain't good". But I went through with the shot. I had pin adjustment thoughts that pushed forward. I should have slowed down and checked if the nock was biting down or just kissing... this resulted in a lost arrow. John is 100% correct... Throat fit is critical... I learned the hard way

@Vanhamj1 Жыл бұрын

Keep this content coming such easy to understand explanations.

@Cpt-Pugwash14 11 ай бұрын

Your videos are the best i have ever seen, Thank you John !!

@buckallison7279 Жыл бұрын

Thanks for showing me my ignorance! Only about 5 years shooting and never heard this, saw this, or shown this. I've been fighting grouping since having bow restung. Yep, nocks are too tight.

@jons7e Жыл бұрын

John's content has been fire ... nerding out on these details

@jamesdunn1231 Жыл бұрын

You Definitely put out the most helpful information in your videos there's several videos you have done the past few weeks that i had no idea my inconsistent shooting was caused by very minor issues after watching your videos i was able to fix it thanks you for taking time and sharing videos like this!

@bojack2740 7 ай бұрын

Thanks a lot. Please keep making these kind of videos. Very informative

@SheepdogConservation Жыл бұрын

Awesome stuff!! All my questions and concerns from the last vid or two on this topic are now answered!! 👌🏼🙏🏼

@SheepdogConservation Жыл бұрын

@jcarry5214 here you have it! In depth video on our previous questions!! 😎🤙🏼

@jasonsuch86 11 ай бұрын

Thanks Mr. Dudley, I always wondered about nock fit

@stevenl4494 5 ай бұрын

You can buy nocks from other manufacturers that'll better fit your string. Right now i shoot goldtip shafts but the nocks and inserts are from someone else. Just make sure they fit the shaft properly.

@btu45nh Жыл бұрын

Very cool vid John makes total sence. Keep up the awesome content bow season starts here in NH 9/15 just around the corner. Time to order some NE arrows. 🏹👍🎸

@jblaze114 Жыл бұрын

been strugling tuning a new bow, groups are a bit spread out at 50. just checked my nock fit and its way too tight, great video again.. gonna swap those out and see how it goes.

@Friends.19166 11 ай бұрын

Dud is the man!!! Thank you buddy!!

@DC-zp2iq Жыл бұрын

Exactly what i was looking for, good job John.

@spodyr6 11 ай бұрын

These small details are all too often overlooked in bow setup. I love your content and am especially impressed with the current series on arrow flight and factors that affect it. Very interesting and enlightening. Thank you !

@grille_c Жыл бұрын

I've used always Beiter Hunter nocks. Whether thin arrows with pin or 23 aluminum for indoor: the width and high is always the same.

@marshallhaslett8717 Жыл бұрын

Great information. Going to check this tonight.

@jrhunt414 Жыл бұрын

Nothing beats a good worn in Beiter or pin nock. Could never really afford to swap nocks. Just wore mine all in. Swap them in practice and have a bunch of extra pre worn in nocks for damage control. I will say that it did create the flat spots and that’s something I have never considered chasing, had too much to chase in my form and mental/biological control. I think it’s definitely something that all bow hunters could benefit from though. Most don’t own a bow press and I’ve seen some crazy D loop angles and peep rotations. With that much twisting preload in the string, it has to be applying a torque to a tight nock on a flat string. I will say that I always press bows a dozen times to get that D Loop perfect with a perfect peep. Now I want to reserve all my flat strings.

@gageadams2587 11 ай бұрын

Does beiter make a nock for a 4 mil?

@jrhunt414 11 ай бұрын

@@gageadams2587 not sure. I know Beiter makes G nocks and X nocks if those fit. My archery brain doesn’t work in metric. Not sure when all this millimeter stuff started. .166 is a G nock. .204 is an X nock. I’d highly recommend ordering a Lancaster Catalog. It has everything in it and has lots of charts and tables.

@gageadams2587 11 ай бұрын

@@jrhunt414 I've got one. I'll take a look

@brockmaes Жыл бұрын

Great video. Funny I was just putting new center serving on and went with the smaller serving. Have you done a video with the different D-loop materials?

@patrickbink4617 11 ай бұрын

I have been shooting the Easton 6.5 with the standard (green) nocks with my Elite Envision and factory strings. 58lbs, 400 spine. Nock is too tight. I used a 3/32 drill bit and a single layer wrap of 320 grit sandpaper and gently by hand (no drill) sanded just the deepest part of the nock. Followed up with a few passes of a thin strip of green scrubby to polish it. For me that seems to work.

@eclipsearchery9387 Жыл бұрын

Very good - thanks :)

@dp5430 11 ай бұрын

I had to use a .10 serving to get my Easton nocks to fit. Factory bow string.

@jakesmith8093 Жыл бұрын

I'm loving all your videos lately!

@savedgesurvive 11 ай бұрын

I have to do my center serving. Where i got my Levitate. The "bow tech" had my serving splitting from the d loop he tied. Ive been told multiple times from them that theybdont have time to do it and tune my bow right now. They told me to make an appoitment to come in after i shot a few hundred arrows after getting it. And how he tied the Dloop is completely sideways compared to my peep. Pretty disappointing.

@shonnyabud7975 Жыл бұрын

Question, so to not have to be changing serving every time you change from lighted nocks to regular ones, should you just stick to .018?

@nockonarchery Жыл бұрын

It works for booth depending on string. Otherwise a .021 no tail under

@mm88swrt 11 ай бұрын

I have a huge pile of lighted nocks ill probly never use again because of the fit, and the extra weight. Wasnt able to get the foc i wanted with the total weight i desired.

@toddlymburner5783 Жыл бұрын

Would to see a video on D loop length for different releases and what’s to short and what’s to long.

@robertdavis1102 11 ай бұрын

That is why my serving is wearing. The nock snaps on too tight but the throat fits good. So if I went down from .021 to .018 should work?? 🎯 better??

@natebennett6840 11 ай бұрын

Is there at any point an issue with removing material from the nock throat to fit the nock to the string rather than replacing center serving to fit the string to the nock? When I say remove material (no, not with a Dremel) 800/1200 grit emery cloth. I understand the importance of them all being the same weight, the same surface finish and structurally safe enough to be launched from a bow. Curious your thoughts on this.

@davefabian2942 Жыл бұрын

Great info , but chasing variations in knocks with serving? what if there is variation in the brand you like?

@davidfleer5307 Жыл бұрын

But remember everyone you have to do this on your own very few archery shops will do this for you and I’m wondering how many of those people that talks about investing their money and making so much money in a week are filling their freezer with the animals they harvest 🤔

@royleerobinson5 Жыл бұрын

Nock fit is so essential to consistency

@brandonpatterson5705 11 ай бұрын

Would to tight of a nock fit allow your string to go past an offset string stop? I have a bear paradox, and after my shot the string is on the front side of the stop, I replaced a with anew rubber same thing any ideas what is causing this?

@timbow50 Жыл бұрын

👍👍

@it_is_what_it_is_brotha Жыл бұрын

I even told the shop that built my new string what nock I was using and gave him a narrow and it still came back too tight. Question, now if you're going to use a lighted nock but practice with regular nock and they're not exactly the same would you rather have a tighter fit on a Easton X knock then perfect when you go up to a lighted to hunt or would you rather it fit perfectly on an X nock but be a little loose on the lighted?

@Blaine.W.A Жыл бұрын

On the nockturnals my serving fits perfect on the outer nock notch, on the inner notch that activates the light, it’s more snug. Which notch should I base serving size off of since the string ends up in both upon release?

@jeremyleis7143 11 ай бұрын

Dumb question, but is there any benefit to minutely widening the nock to get the proper fit? I get that I’d be messing with a delicate tolerance that could weaken the nock, but if you’re careful would it improve the arrow flight? I acknowledge this isn’t typical decorum. Appreciate the feedback.

@EDDAHLEN 9 ай бұрын

I’ve done it without issue. Just have to be careful, it really doesn’t take much.