NOCO Genius GenPro 10x3 Onboard Boat Charger: Installation, Programming and Review

Рет қаралды 19,160

Жыл бұрын

Noco Genius Charger: amzn.to/3XWfSGn
Sony ZV-1: amzn.to/3QIEKwN
GoPro Hero: amzn.to/2NusMv0
DJI Wireless Microphone: amzn.to/3vSrdeh
ULANZI Case w Cold Shoe: amzn.to/3kLXldf
Tripod: amzn.to/3a0oF1u
GoPro Quick Release Mounts: amzn.to/2L2zFTu
GoPro Quick Release Buckle: amzn.to/3ocyp1h
In this video, we will guide you through the installation process and provide an in-depth review of the NOCO Genius GenPro 10x3 Onboard Boat Charger as well as show you how to program it.
Are you tired of dealing with multiple battery chargers for your boat? The NOCO Genius GenPro 10x3 is a powerful onboard charger designed to simplify your boat's charging system. With its advanced features and capabilities, it ensures efficient and reliable charging for your boat's batteries.
Join us as we walk you through the step-by-step process of the NOCO Genius GenPro 10x3 charger. We'll cover everything from mounting the charger in a suitable location to connecting it to your boat's battery system. You'll learn how to set up the charger properly for optimal performance.
Once installed, we'll provide you with a comprehensive review of the charger's functionality and performance. We'll discuss its key features, such as its multiple charging banks, advanced monitoring capabilities, and intuitive user interface. We'll also evaluate its durability, reliability, and overall value for money.
Whether you're a seasoned boater or a novice, this video is for you. Join us as we explore the installation process and dive deep into the features and performance of the NOCO Genius GenPro 10x3 Onboard Boat Charger.
Don't forget to like, comment, and subscribe to our channel for more exciting content like this. Let's get started!
As an Amazon Associate I may earn from qualifying purchases. At no extra cost to you, your purchases help support this channel. Thank you!
#NOCOGenius #GenPro10x3 #BoatElectronics

Пікірлер: 46

@andywynn1258

This juts perfect product I need right now for my boat. I flushed my Sea Fox Commander but forgot turn key off whole night then all my 3 batteries 🪫 gone. This is just a perfect solution for me rt now. Thanks so much

@frankt7944

Yes, I noticed that too. A lot if people using them on board and good reviews. It’s probably just NOCO’s way of protecting them from any liability when used on boats vs using them on vehicles like RV’s with multiple batteries. Or they just haven’t updated their user guide yet with appropriate warnings like other marine on board brands do. For example, the Minn Kota MK 330 PCL

@bryanjacobson5091

I just installed the NOCO 10x2. Looking forward to it.

@danielong911

@bugsgrass

I want to add a GenPro10x3 for my boat trolling motor (24 V VDC 80 pound Ulterra) and like you back to my starter battery. I also read do not make it longer than 10ft. I had a question for you, what extension should I connect but it looks like I have to cut and connect. I think I may buy the extension from NOCO so I can swap ends (terminals and clamps). How did you end up doing it?

@MrChurchie73

great video!

@keithhester2648

Does the charger remember the last selected battery type each time you plug it in, or do you have to select the battery type each time you use it?

@VitoMacchio

Do you have to remove the jumper that connects the 2 12 volts making the 24 volt?

@rds990

The NOCO manual says "select the mode and then for Lithium batteries, hold the Mode button down for 3 seconds." I don't see anyone doing that on the videos. Is that something not needed ?

@davidpearson9810

What if you have your batteries hooked up in series? Would you still hook up each battery separately?

@Jcnell9

I just purchased the 10/3 going to installed today my only good option to install it is laying it flat do you think it would be a problem also once the batteries are charged can’t you leave them plugged in all the time as a trickle charger?

@Gooselip

Does it tell you battery life if it's not plugged into an extension cord?

@daveperson1722

So where’s the part where you mount it and if there’s any issues ?

@yellamamba4554

How long would it take to charge a single lithuim 24v battery with that 10ah charger?

@stucatz1002

Just pull out the fuses instead of taping the ends

@namename1

How did you choose 3x10A means 1000A each instead 5x2 or gb150 boost 3000A for 299$

@samtriplette8716

do you have your two lithiums parallel or series or seperated? Are you running one bank per battery?

@frankt7944

Looks like a quality charger, however I read through the user guide and it makes no claim that this is an onboard charger for marine use, but the exact opposite quoted here Page 6 note 7: “ A marine (boat) battery must be removed and charged on shore. To charge it on board requires equipment specially designed for marine use.” They don’t go into much detail into connecting batteries other than vehicle install and ground to chassis requirements. No diagram’s or explanation of connecting multiple battery banks. Curious if the unit came with different instructions than what I could find available online?