Thanks for sharing. I’ve been really playing around with the IF & ST. I’ve been keeping my tone break around 9-10. 9 if I can without falsing on iron. I have almost completely switched over to pitch tones especially in heavy iron sites. It definitely helps to get through the iron. I normally run my IF at 2 sometimes 1 if I can get away with it & my ST at 3-5. I’m constantly in my test garden playing around with all the setting. I’ve learned a lot this past year or so with the Legend. It’s just comes down to test, test & then go out in real world & try to tweak it to that site. I use to always use Park multi 2, but here lately I’ve been having good luck with field mode in multi 2 & 1. I’m going on a couple years with the Legend & starting to figure it out. Been pulling some great relics & lots of silvers.

WOW, I got my legend my past summer and still learning the setting. Your video help a lot. also I am Prospector Cashe dive partner and ground hunter buddy. I can't wait to see your other videos.

Excellent info and analysis on a popular machine. Regardless of any past issues in the evolution of the Legend there appears to be some significant improvements in its development. I’m not a Nokta owner but if I were so inclined I would not hesitate to buy a Legend given it’s improved performance and the results reported by noted authorities like yourself on the product. Thanks for all the time and efforts you put in to provide outstanding service to the Metal Detecting Community.

I really like the way you explain things, as you always impart the information in an easily digestible format that suits everyone’s palate!

Thank you, you sure know your way around a detector!

Great info on the legend.👍

Great information!

Thanks for sharing!!!!

Nice information on the legend.

Thanks for sharing

Thanks for vid

I have been using the legend since It came out. I beach hunt but not close enough to really test and play. I been struggling finding midtones on the beach when its low. Want to see your nickle test on the beach with the Legend. Thanks for the videos!

Great vid Could you do a video on the Deus2 with your settings? Thanks in advance GL&HH

Pretty Much the settings i am currently using. Im a deus 2 guy but my deus 2 coil battery is malfunctioning and will not hold a charge but 2 hours so I been using my legend. I lower my first tone break to 7 and raise iron filter to 2 and stability at 3. Recovery 6-7 is really good for about any situation. I run in 4 tones though. I do not like pitch on the legend because pitch doesn’t really have a good round tone like 4 tones. You can really tell a round tone on the legend when in 2,4,or 6 tones

Olá, eu tenho uma questão que nunca entendi muito bem que é a questão de if e estabilidade,então colocar filtro de ferro em um valor menor que a estabilidade dá mais resultado de separacao que o contrário, colocar filtro de ferro em um valor acima do valor de estabilidade !?

The Legend Detector is just as Jumpy VDI as the X-Terra Pro is and I didn't see any kind of solid numbers 15-55 ,But the Tone's are still in the High Pitch Tone's and the same exact Tone's for each Target And even if it was a 2 Tone pitch Tone's it's still the same exact Tone's for either the good Targets and the same exact thing for the Bad Target(High Pitch - Low Pitched Tone's) and that's also why I went to a Minelab X-TERRA Pro and the Simplex + that I had was traded for a Equinox 600 and Minelab Detector's are the Best Decision Tone's and They can tell me what the target is and not just have a 2 Tone pitch that really doesn't tell me what the target is but just to keep digging deeper and find out what the target is and going to be And was it a target that I was wanting for the bucket list and the Minelab Detector's Tone's are essential for my decision to decide if I want to Dig it up and then the jumpy VDI on the Legend Detector and it's Ghosts Signal's and if Calabash didn't tell us what the target is, I wouldn't of been digging up any of the Targets, based on the Tone's and yes it hit the targets clear but it's not knowing if it's hitting a Nail target and then calling it a good target and the Simplex + did that ALOT and I have dug up a ton of Iron Quarter Tone Targets that the Simplex said that they were great quarter Tone's and when I was using the Simplex ALL Metal Mode it was the same exact Tone's for everything that it detected and the X-Terra Pro and Minelab Detector's and I'm not stuck with what they think 🤔 That I need to Hear And I can change it up to suit me and the Notka Macro Product's you can't change it up that much and All I heard that he was using the Pitch Tone's and I didn't really hear any different Tone's between the targets and the half dollar is a totally different tone than the dime Tone but it was the same exact Tone's for everything that Calabash swung over using the Legend and he may have it just setup for a 2 Tone pitch but he doesn't say that it's a 2 Tone pitch program, just says pitch Tone's and pitch is different on the Minelab Detector's and then you can hear the sound of the EMI Problem's that the Notka Macro Detector's lineup can't handle it and I was a Fan of the Notka Macro brand and I have gotten a few people to buy the Simplex + and are still enjoying it but I haven't seen them lately and To show them the X-Terra Pro on one of their Permissions and that's how they went from using a Garrett Ace 400 to the Simplex + and I was finding targets that the Garrett wasn't even getting using the Simplex and I know that once I see them and I can show them the X-Terra Pro it will be ordered Soon and the Simplex will be going to the Closet and Collecting Dust...... EDIT: And I have since Traded the Simplex + for a Equinox 600 and It's a Work in progress for me and getting use to the lower VDI 🤔 but I do enjoy it....

I am waiting on the WDL models. W=watered D=down L= legend