Non-Genuine battery warning IPHONE XS || XS MAX ||11PRO || 11PRO MAX / Important battery message 100% fix
Пікірлер: 34
@bencepuski74472 жыл бұрын
Dont use heat with the original bms, you will damage the components permanently.. just cut the ends and use a spotwelder.. if you want the percentage to be 100% you need to buy a tag on flex cable + a special reader like qianli ipower
if you have detailed reviews on i2C i6 / Luban L3 mini / JC V1SE / Qianli iCopy , please? Can you share info. thanks!
@amraizbirwadkar582 жыл бұрын
Will this work if we do it with a copy battery or it just works if the replacement battery is original Apple battery?
@ahmedjr7574 Жыл бұрын
Thanks Bro
@chinaphonefixteam6300 Жыл бұрын
Well done!!! Thank you very much for this video, simple and clear!!!
@freewaydaniel6253 жыл бұрын
but does that message affect the battery life and is the battery 100% but just not showing it or how do you know your battery life having that message
@QAGDADSSTUDIO Жыл бұрын
is this the exact mothod if replace the battery at apple strore servives
@jdmtyteeeyo3 жыл бұрын
thanks for the fix video
@appiahmichaelodame12792 жыл бұрын
I try it but after fixing the battery the percentage was 26% and when charging it does not charge so please what should I do for the battery to charge and the percentage to move to 100%. Please I need help
@dennis-br6vr2 жыл бұрын
Damaged bms board
@KileLange Жыл бұрын
can you do this for my phone
@justinedsel2 жыл бұрын
does it say that the battery has been replaced in 3utools?
@dennis-br6vr2 жыл бұрын
No because the bms is being transferred. A phone cannot see that you replaced the battery cell only.
@justinedsel2 жыл бұрын
@@dennis-br6vr thank you!
@m.kaschi27412 жыл бұрын
Can anyone tell me what exacty is the yellow tape in the end? Maybe send an Amazon link or sth? Thanks in advance :)
@servicezone2 жыл бұрын
a.aliexpress.com/_mKPvn1Q
@xvalentinserbanx Жыл бұрын
It's Kapton Tape
@shazadhussain44673 жыл бұрын
Can anything be done about the battery health?
@LiquidXiron2 жыл бұрын
Yes, he did not reset it. So either the iCopy or JC Programmer can reset it to 100% and cycle count.
@dennis-br6vr2 жыл бұрын
@@LiquidXiron you also need a tag on flex cable. Otherwise you wont be able to do that.
@PistaKral6 ай бұрын
how does the tag on flex work, can I use the same one all the time or do I need a new one for each battery change?@@dennis-br6vr
@rockinhocrespo33722 жыл бұрын
fake and bad repair, this genuine pcb from apple need interface JC board to reset cycles and health
@dennis-br6vr2 жыл бұрын
And you shouldnt solder on the bms board. Always use a spotwelder, bms boards cant take heat at all.
@user-rr4us3uc6w3 жыл бұрын
haha 85%
@mobiletechnician4310 Жыл бұрын
85 health 🤣😂😅😂
@tetaizozadja7080 Жыл бұрын
very poor job…
@AmeenKhan-kh1ty3 жыл бұрын
How to reset battery health?
@jibbaowndsu3 жыл бұрын
For previous models you can use qianli icopy 2.1 or qianli apollo 2021 supports 100% reset but you need to swap another battery with non genuine message to reset the phone then install your welded and reprogrammed battery and its back to 100% i’m just not sure about 11 and above models....
@dennis-br6vr2 жыл бұрын
@@jibbaowndsu from iphone 11 and up you need a tag on cable. Without it you wont be able to reset it to 0 cycles and 100%
@jibbaowndsu2 жыл бұрын
@@dennis-br6vr true you need the qianli flex than you need the pc to change this
@amraizbirwadkar582 жыл бұрын
Will this work if we do it with a copy battery or it just works if the replacement battery is original Apple battery?
@sultan26706 Жыл бұрын
Works with all battery all battery you need original flex cable