Buying and Fixing a Yamaha Rhino 660 UTV

Рет қаралды 202,023

Күн бұрын

On Amazon:
*660 TOP END KIT: amzn.to/2XNyH0g
*MACHINIST STRAIGHT EDGE: amzn.to/39EUKLX
*RED LOCTITE: amzn.to/3ijZLNU
*FINE EMERY CLOTH: amzn.to/3qwINit
*MILWAUKEE M12 RATCHET: amzn.to/3qpURlt
MY OTHER RHINO 660 VIDEOS:
~1ST TIME RIDING A RHINO: • Riding UTV's and Snowm...
~BUYING A YAMAHA RHINO UTV: • Buying and Fixing a Ya...
~REPLACING STATOR: • Yamaha Rhino 660 UTV S...
~REPLACING OIL PUMP CHAIN: • LOOSE/SLOPPY Oil Pump ...
~ADDING A PULL START: • No Battery, No Problem...
~SETTING CAM TIMING: • Cam Chain Timing Overv...
~DIGITAL CLUSTER UPGRADE: • Rhino 660 Digital Gaug...
~NEUTRAL LIGHT FIX: • Yamaha Rhino 660 Neutr...
0:00 Intro/Buying Rhino
0:20 First Ride/Breakdown
03:16 Retrieving Rhino/Thurman
05:18 Why I Bought A Rhino
08:03 Teardown/Repair
19:24 Startup/Break In
21:09 Going Riding
28:27 Drone
29:05 Long Outro
~‪@AndrewCamarata‬ 's Video on Rhino: • Buying a UTV
This 2005 Yamaha Rhino 660 popped up on Facebook Marketplace for $1,000. Ended up getting it for $1,600. I was told that it overheats/blows white smoke after riding it for a while and reverse only works sometimes. This video is about fixing and riding it.
Note: I forgot to mention in the video why I replaced the jug/piston. The original had rust/pitting on the walls and excessive skirt clearance. Also, I wanted to see the the 1.5 star Amazon NICHE parts were any good.(And they were NEXT DAY delivery) `
~~~~~Help Support the Channel Below~~~~~
~Subscribe Here: kzfaq.info...
~Follow on Instagram: / nononsenseknowhow
~Donate via Paypal: www.paypal.com/cgi-bin/webscr...
~Shop on Amazon from this Link: amzn.to/2uDE6eT
~My Gear/Tools on Amazon: amzn.to/36S6J6s
*I get a small commission on any purchases made through the Amazon affiliate links on this page. Doesn't cost you any extra and helps me to continue producing content. Thanks!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Other AWESOME Channels You Should Check Out:
~South Main Auto Repair LLC: / @southmainauto
~BleepinJeep: / bleepinjeep
~Project Farm: / @projectfarm
~Chris Fix: / @chrisfix
~Andrew Camarata: / @andrewcamarata
~Humble Mechanic: / humblemechanic
~Essential Craftsman: / @essentialcraftsman
~EricTheCarGuy: / ericthecarguy

Пікірлер: 375

@dbosley46 Жыл бұрын

I am not only impressed with your knowledge and skills as a mechanic but you are VERY talented at making incredible videos. Not only the filming and editing but that you are very thorough in explaining what is wrong and and how you fix it. Great job.

@knightwizaed6921 Жыл бұрын

Ya I agree, these guys really know their stuff now a days, quite enjoyable

@lsxbird7874 Жыл бұрын

Chris is the kind of guy you want to spend your free time around. Iv learned many valuable skills from similar mechanical minded people that were willing to let me shadow them and learn, and it has allowed me to achieve things thought I could never do, and doors to open in my life that wouldn't have been possible. I like watching his videos, not only for the good content he creates, but also the vast wealth of knowledge that can be continually learned through his and others experiences

@bigbttexas 10 ай бұрын

You are THE MAN!!

@jennifersugint 3 жыл бұрын

What a great time! I can’t wait to take it out again.

@NoNonsenseKnowHow 3 жыл бұрын

Me too! We'll have to bring it out West and get some Red Dirt riding in on it.

@danieltwaddle8465 2 жыл бұрын

You're the star or the video Jen. Lol

@theDunn05 2 ай бұрын

Hey man. Wanted to tell you I bought an 07 rhino 660 / 686 about 3 years ago. It needed a ton of work and I spent a lot of time watching you videos along with a lot of others. That crazy machine is a beast now. Full engine rebuild, re-honed, new rings and everything else. Timing, gaskets, water pump. Thanks for making videos, they helped a lot.

@armandopatane5343 Жыл бұрын

Don’t worry = I’m sure jen will never leave you = BECAUSE WHEN THE WORLD ENDS = it’s people like you who will save us 😊

@KutWrite Жыл бұрын

That was fun. I love your use of time-lapse. Jen adds sparkle to every video she's in.

@bradsavage2384 2 жыл бұрын

Editing these must take an eternity. Best videos on utube. Keep em coming.

@garyseaton4619 Жыл бұрын

You're so skilled. Your content is so impressive because it doesn't seem like there's anything you can't rebuild. You and Jen can enjoy your new UTV...

@12106Scott Жыл бұрын

Your mechanic skills never cease to amaze me. You even improved brand new parts that you bought for the Rhino by shaving flat the head. Measuring rings and gap, another step most people wouldn’t think to do. For you however it seems basic! Way cool and super fun to watch.

@lisadeyoung5361 2 жыл бұрын

Most guys whine about slipping a .002 feeler gauge, like you did. But, all the fancy measuring is BS. You did it simple, and straight forward. Fantastic.

@jonathancoley8112 Жыл бұрын

Great video! It amazes me that people have the patience to tear in to things like that and the knowledge to put it all back together. Major props!

@smplyizzy 5 ай бұрын

Lol, “She does not like gears”!

@gifted2at94 Жыл бұрын

I love watching the mechanics on KZfaq, I was a football guy coming up in hs and college, Man I wished I'd taken interest in even just learning the basics , I'm doing it now, but watching these guys on here like Chris, Vice grip, Sleeperdude these guys are my new sport's stars....lol. bunch of gifted people in the auto mechanics field, Some real superstars here on KZfaq , I'm just fascinated.

@evana1900 Жыл бұрын

Andrew camarata is a gold mine.

@forthrightnight Жыл бұрын

Check out Musty1, Pine Hollow Auto Diagnostics, South Main Auto, worth watching.

@Techprep23 Жыл бұрын

Never too late to start. I was a computer technology nerd first. Got a mechanic job late 20s Very basic mechanic job. Then made a mechanic friend at work who came to find out made his own small business fixing these. Started as a tool bitch drinking beers and handing out tools on Saturdays and basic part replacement jobs. Now I'm rebuilding a 2002 Yamaha Bear Tracker he gifted me it's great fun.

@dinokejs9665 2 жыл бұрын

I am a fan of Andrews channel for years, now that I've discovered yours its a whole set! Going through every video with a smile :) greets from Croatia!

@nastyn8te328 Жыл бұрын

You two are the most awesome couple ive ever seen! You guys have so many adventures and so much fun and i almost forgot about Guss so you three!

@josephperry6822 Жыл бұрын

just joined the channel recently and I'm enjoying you being you bud, learning a little to boot! looking forward to more projects. well done with your scuba truck revival...

@ezrvs 4 ай бұрын

The best UTV video I’ve ever seen! Very informative, fun and entertaining!

@NoNonsenseKnowHow 4 ай бұрын

Glad you enjoyed it! Thanks!

@richardk9906 Жыл бұрын

😅Great videos' Jen is a real trooper Love all your videos.

@paulgreene1277 Жыл бұрын

Enjoy all these videos and love how you jump in and tackle what would be intimidating projects to most of us. Also liked hearing old cypress hill and your taste in music in all these videos. Thanks!

@markmyers454ss Жыл бұрын

Love this video. We’ve been looking for one since you posted this and finally found an 05 660 last night that needs a new timing chain. Cant wait to get it going and have some adventures as well.

@secretlake5528 Жыл бұрын

Thanks for the video If you have any future problems you're going to want to use head studs with nuts And install a battery and relay cover You do not want your electrical system covered in road grime These rhinos have a reverse speed limiter that goes faulty You can just cut the wire and grounded out

@kentevans4218 2 жыл бұрын

This is an Awesome Channel!! This dude knows is stuff and gets after it!!! Love it!!

@dajuice8228 Жыл бұрын

What a taste in music, young folks, April 26 1992, insane in the brain. Part of the fun is seeing if I know all the songs.

@joegilly1523 Жыл бұрын

Good fix up. I have had my bolts come loose on my wench before.

@coldrone 3 жыл бұрын

Best Rhino Video I've seen on KZfaq. Bring on the other ones!!

@NoNonsenseKnowHow 3 жыл бұрын

Hot damn, will do! Thanks

@HardwayRanch Жыл бұрын

I know I'm late commenting on this. But I just want to contribute a tip about glass. The back side of a mirror is the flattest glass surface you can easily acquire. The reason for this is during production of the glass, when a liquid, the bottom is flatter than the top and so when making a mirror the silver coating is applied to the bottom to reduce optical distortion. So when using glass to back sandpaper I learned to use the back of a mirror to get the flattest surface.

@ronrado3433 2 жыл бұрын

Would love to see part 2 and the changes and additions you mentioned. Let’s go… can’t wait to see it.

@NoNonsenseKnowHow 2 жыл бұрын

I've been shooting some footage for a part two, but it's nothing extravagant. Just going over odds and ends that I've had to fix and some stuff I've changed. Should be posting it within the next month or two once I get some footage to wrap it up.

@CB_ChaosLove 2 жыл бұрын

i really want to get a Rhino. seems like a capable but slightly entry level fun/practical machine!!! Really cool to hear the Andrew Camarata connection!

@patbriggsmbr Жыл бұрын

Brilliant video, I could watch these all day. 👍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@josephperry6822 Жыл бұрын

it is fun too go thru the property for parts then the vehicle, nice job. Always enjoy watching you having all the fun, good score!

@XCHANGEDAVE Жыл бұрын

Great job your Channel's going to go far, you have all the things that we like to watch. Keep up the great work. Give Gus a hug.

@DC5_James 9 ай бұрын

Sublime, Mobb Deep and Beastie boys in one video?! I knew you were a man of exceptional taste.

@texasviking1 3 жыл бұрын

I just bought me a 2007 660 sport, it needs a bit of work but I’m still impressed by it 👍🏻👍🏻

@downstateradv 3 жыл бұрын

By far the best video you've done. Nice job man.

@NoNonsenseKnowHow 3 жыл бұрын

Damn, thanks man. I appreciate the feedback Alex.

@davidlampe4153 Жыл бұрын

It’s a good video your home made glass grinder idea is very helpful. I suppose to offer the rebuild kit at such a low price they are cutting a few corners. Your rich mechanical skills are well suited to enable you to rebuild the machine so quickly.

@jeredrice5594 2 жыл бұрын

Couldn’t Help but nod my head when sublime came on! Love the channel man!

@NoNonsenseKnowHow 2 жыл бұрын

Hells yeah man! And thanks I appreciate you checking the video out

@juanmclemente763 Жыл бұрын

I'm sooo impressed by your skill of mechanic I can stop the see your video. And always sharing your success with your wife well done. Marcos form Puerto Rico

@jefferybye2169 2 жыл бұрын

I agree best rhino video ive ever seen..You rock Chris..

@thomasarmistead9603 Жыл бұрын

Yes. Part 2 I personally like the UTV/Motorcycle realm. Thks for pulling the gas tank on the Tow truck have been looking for videos of such.

@donaldhunt4 Жыл бұрын

I've watched quite a few of your videos and all I've ever heard you listen to was country and I think old style rock and roll. Cypress Hill?? I love it! You've got many layers my friend! Thanks for the videos Chris!

@kevinbaker6168 Жыл бұрын

Need to get yourself a tow strap to go around the trees, and maybe a snatch block. If you haven't already install a light bar above the windshield. Definitely a roof.

@coxyofnewp Жыл бұрын

I'm really enjoying my Xmas binge of your vids.. Expecting allot more great content for the new year too

@dougiequick1 Жыл бұрын

You solved the problem! How to make a Rhino fast. Just record driving and then play in hish speed! The trick is though you need to talk very slow in a low of voice as possible

@garyseaton4619 2 жыл бұрын

What a great toy / workhorse... Props to Jen for the Miller Lite beer...

@kimosabbe50 Жыл бұрын

Your talents, along with Jens, make for the perfect automotive / mechanical / entertainment KZfaq channel 👍

@jasonlapp4559 Жыл бұрын

Hose clamp ring compressor...just awesome!!!

@harrybrown4296 Жыл бұрын

Your videos are great , the content is very interesting, you are a terrific mechanic. Jen is adorable (but you knew that). You are putting people like "Vice Grips Garage" "Auto Auction rebuild" " Puddin something" "Matts Offroad Recovery," "Fab Rats" to shame. Good ones are: Mortse, Andrew Camarta, South Main Garage, Junk Yard Digs, Junk Yard Mook, Sleeperdude, Streetlegalcars are real good also. You are the real deal.

@itsmephil2255 Жыл бұрын

Rapidly becoming 1 of my fave youtubers

@supermullaney 2 жыл бұрын

Dude you got the best helper in the world,she's a cutie and a keeper....love your videos.

@nickland2787 Жыл бұрын

Welllll, today i took the rotating plate out of the bottom of my microwave and cleaned it so that makes us pretty much the same person 🤣🤣🤣.. I've been binging your channel for 3 days now and I'm soooo impressed brotha.. You definitely earned my sub and follow

@user-yg6fi8bp3n Жыл бұрын

Wow great work and even better time. Awesome

@dgb56bgd Жыл бұрын

Glad you did a part 2.

@jeffwagner9741 2 жыл бұрын

Really helpful. Good Videos keep up the good work. I have 2006 rhino. Great work horse

@johnhicks735 Жыл бұрын

You wash those metal filters out with kerosene.,or diesel fuel to.& Blow out lightly with air blowgun tool to dry out the filter to. I seriously suggest you trying some of that copper coating spray.&STP bars stop leak additives to in.& On your new atv.,or utv all terrain vehicle.

@michealroth120800 2 жыл бұрын

I had the "blipping" issue on a polaris four wheeler. It was EXACTLY like that. It was just the key switch. EASY fix.

@bobtucker8875 2 жыл бұрын

Would really like to see a part two. Those are good little rigs. You may have a bad switch.👍👍

@jackanderson1418 Жыл бұрын

Add a Led light bar to the front you'll love it. Thanks KS for the great vidio.

@orderlysplash2643 6 ай бұрын

Used the same kit for my machine, 3 years later still going strong

@jerrygoad3093 Жыл бұрын

Poor Jen she's the best you're so lucky God bless you both you know better

@welshlyn9097 2 жыл бұрын

I love it you always clean before you work on things.stay safe Welsh Lyn.

@NoNonsenseKnowHow 2 жыл бұрын

Yeah definitely a step worth not skipping! Saves time in the end i feel like

@kevndo 5 ай бұрын

Snow is coming down! Time for some rhino action!

@robertpimpo4698 Жыл бұрын

That things awesome great job fixing it up

@NoNonsenseKnowHow 3 жыл бұрын

@miker8915 2 ай бұрын

Great video. Yes, it would be great if you have a 2nd video on the upgrades to this Rhino if you still own it. Thank you for posting

@lawrencepevitts2434 Жыл бұрын

Definitely a part 2. I'd like to see you fabricate that heater you were talking about.

@Kstevensmd Жыл бұрын

Yes on part 2!

@cycloopnl Жыл бұрын

Can't wait for part 2. 😊👍🏻

@stuwism Жыл бұрын

Really great video.. Good Job!

@coreyjjones2008 2 жыл бұрын

I like that hose clamp on the piston trick

@robertnewman1593 Жыл бұрын

Love your videos and that Jen participates in some. Loved her kitchen remodel. Great job. Is there anything you can't fix? Do you ever say No to a project or started one and gave up on? I would think all those years of sitting that seals and things would be dried up, rotting and such.

@lesnagy564 Жыл бұрын

Love you post’s! I didn’t make the conversation between you and Andrew! Even though I watched the episodes with you in it! You and your lady friend?! Or wife make a lovely couple! She reminds me of my wife when we first got married! Love all your little pets! We’ve had lots of little friends from the bush here in Australia! Must say you must have a shortage of cops! We would never be able to take just any vehicle on too the road! Not even back roads!

@hondaman6918 2 жыл бұрын

Love the video, thanks for sharing!

@robertlemoine3500 Жыл бұрын

Thankyou, peace fellow babies.darn fine program.

@MalaysiaDashcam Жыл бұрын

Love u from Malaysia. Such a sweet and smiley Jen. 🇲🇾🇺🇸

@hargray2 3 жыл бұрын

I put a stock grizzly front clutch sheave and a dynatek CDI on my ‘07. It does 59mph on stock 25” tires.

@eframcolon3060 Жыл бұрын

Hi Chris, I've binged watched your videos for the past 8 months now and I'm a novice mechanic myself, but I'm not afraid to take advise from highly skilled mechanics such as yourself. I like watching the videos that you post alongside your wife Jen, and doggie Gus. In this video on fixing the Yamaha rhino 660 UTV I've heard you say that the headlights suck, I highly recommend that if it takes headlight style/size headlights to get the Hikari 2023 future 30000 LM LED bulbs 65w Titanova LED high lumens 6000k cool white Ip68 waterproof headlights, They are not really 30,000 lumens as advertised, more like half that at 15000, they're a bit pricey at $130, but well worth it. I can easily see 500 ft to about 1,000 ft ahead of me, and they have a wide viewing angle for in your case on the trails for potential danger with animals crossing your path. I'm in no way being sponsored by Hikari, I just like their products, and I've tried over 20 different types of styles of headlights, based on durability, brightness, and quietness. And these by far beat the rest. You said you wanted to put a light bar on the rhino, well with these headlights you will not need that light bar... Good luck..

@ovlov245 8 ай бұрын

EPIC CHRIS AND THE J.SUGENT lifting the hood was so funny!

@sudd2685 Жыл бұрын

She doesn’t hate you, making a memory, got your steps in for the day

@shootingwithmitch5921 Жыл бұрын

Loved this vid,

@loofy26 2 жыл бұрын

So funny to watch ^^ cheers from France !

@charlesbrown2451 3 жыл бұрын

I agree with DownstaterADV. This is your best video!

@NoNonsenseKnowHow 3 жыл бұрын

Thanks Charles. Definitely takes longer to make this style video than what I usually do. I have a lot of hours wrapped up in this one. It was fun and enjoyable to make though because some of the stuff was pretty funny to look back on

@asdtop1284 Жыл бұрын

You are the splendor of happiness my dears

@truenexus1usa 3 жыл бұрын

Loved it. Now I want one too. If you often ride without a party maybe carry jumper pack or fit in another 12v wet cell? The Broke Down Lost Dude was fortunate to have you out there that late.

@NoNonsenseKnowHow 3 жыл бұрын

Yeah you're right, should probably start riding with a jump pack. That thing has the little pickup bed so I will probably put a pretty good oh shitt kit in it

@NoNonsenseKnowHow 3 жыл бұрын

And yeah Thurman was ready to push it in the woods, hide it for the night and walk back.

@paulpresto7346 3 жыл бұрын

Nice video- I subscribed to see part two . Very nice work

@NoNonsenseKnowHow 3 жыл бұрын

Thanks man. So far I've been kind of breaking down the other videos into small repair ones. But yeah eventually I plan to do a part two that has a bunch of fixes and some riding and probably some breaking down

@mikecowan8762 Жыл бұрын

Really Good Machinic.!!!

@clauderichard7576 Жыл бұрын

Thanks looks like a joy to ride

@oscarvalenzuela45 Жыл бұрын

I think you should add a CB radio to your Rhino 660, Never no when ur cell won't work an call Jen on ur home base when your out an about in the snow or whenever,,like your shows keep it up, Later.

@timf2279 2 ай бұрын

You both are a cute couple and love your project Rhino. Well done.

@gregpavone8485 3 жыл бұрын

Enjoyed the video and you had the opportunity to ride with the one and only Andrew. Next up Mustie?

@NoNonsenseKnowHow 3 жыл бұрын

Awesome. Glad to hear. And yea riding with him was a blast. Tough to keep up

@KM_59 3 жыл бұрын

Absolutely part2 looking for the same machine myself

@NoNonsenseKnowHow 3 жыл бұрын

Cool. Yeah they are definitely a worthwhile unit. Well built. Yeah once I get some cash together and all the parts I need Ill do a part 2 with all the mods and then some more riding

@billdyke9745 Жыл бұрын

You guys sure know how to find fun... 👍

@kennethmorgan2704 Жыл бұрын

Jack of all trades, good deal!

@petercorreia4019 Жыл бұрын

Yes I would like to see part 2

@unclebilly1353 2 жыл бұрын

Great work on your Rhino. The odd thing to me is where did you find room to ride in bucks county? I live in new mexico now with a rhino. You treat these machines right , they are reliable. Good luck and be safe.

@cm5838 Жыл бұрын

I’ve had pretty good luck with niche top end kits, aside from one that I may have over torqued and cracked, I read the wrong line and put three times the torque it was supposed to have. I mostly work on Honda’s and Polaris since they are more common here but personally I am a Yamaha fan. I did however just buy a Polaris ranger, so much more comfortable than my Yamaha big bear.

@NoName-yr1jv 3 жыл бұрын

This is a really good video my friend

@NoNonsenseKnowHow 3 жыл бұрын

Glad you like it. thank you very much

@Chris11111 Жыл бұрын

I just started watching your channel....started with your Vegas to Home adventure. Then I started to watch this one and saw you drive by Andrew Camerata's castle. Small world on Your Tube I guess.