@shesees432 Жыл бұрын
You're such a great teacher that just about anybody could do this after your instructions. Well done! 👍💗
@antraciet 5 жыл бұрын
Great repair, wasn"t easy to find the problem.
@RES. 3 ай бұрын
Pretty smart guy...nice job...wish I knew stuff like this....
@victoriatrestrail 3 жыл бұрын
This was excellent. I am having the same problem with my iLife vacuum and I will try this tomorrow.
@DavidAmmerlaan 5 жыл бұрын
nice little sweeper
@zaprodk 5 жыл бұрын
Being used to seeing my Roomba's roam around, this one has a peculiar movement pattern. The wheels are set quite far in on the sides, so it looks funny when it turns. Interesting fault - i wonder what fried that diode - under rated or just a bad batch?
@mrsemifixit 5 жыл бұрын
What are those diodes used for if the charger is already putting out dc voltage? Are they for reverse voltage protection?
@chazzer4759 2 жыл бұрын
Thank you for this video- exactly the same problem Are u saying I can do this myself? Without taking it in to shop? I won’t muck up the well mother board?
@Infiniti25 5 жыл бұрын
Do you have a video covering the creation of that psu load with the switches and orange high wattage resistors and how to safely use it?? If not can you produce one please?
@javasrevenge7121 Жыл бұрын
Rowenta 60 serie, a couple of months old, not used daily. I think that it has the same issue as here.
@discoHR 5 жыл бұрын
07:50 You're measuring current going through a diode by shorting the diode with probes? First time seeing this. How does that work? Doesn't portion of the current go through the probes and the rest through the diode? I would desolder one leg of the diode and add amp meter in series.
@retrofitter 5 жыл бұрын
The burden voltage of the multimeter is less than the forward drop of the diode, the current will flow though the meter and not the diode
@zaprodk 5 жыл бұрын
I was also a bit surprised by that, but i guess you can do that if you know that nothing bad happens by not having the diode in the circuit for a moment.
@FEMADEATHCAMPCONTROL 5 жыл бұрын
Its a short through the meter. All the current will go through that short.
@norcal715 5 жыл бұрын
the power supply should be in constant current mode to charge the li-ion battery and the current would stay the same up to the max cutoff voltage. I should have mentioned it in the video.
@DrSoda. Жыл бұрын
Thanks, this may be the problem with mine
@JuanHernandez-jo7rb 5 жыл бұрын
Gran reparación. Gracias/Great repair. thank's
@ryanmeyer2118 2 жыл бұрын
Does anyone know where to buy replacement filters for this vacuum? I have no need for the mopping pad, nor replacement brushes.
@mixinginthebox 5 жыл бұрын
Thank you.
@zekeilleyva1735 3 жыл бұрын
Can you fix a Coredy R300
@javasrevenge7121 Жыл бұрын
After opening and cleaning a 2nd time the robot is working again :)
@ronaldspencer547 4 жыл бұрын
My pucrc25 has the same problem. Must be a design or manufacturing defect.
@daliariveravelazquez6670 2 жыл бұрын
I need you to fix mine.
@MrSnuffinum 3 жыл бұрын
DO NOT BUY THIS! They have horrible customer service! And broke after few month of use!
@ahmeddahmani2662 5 жыл бұрын
salut prof
@SpicyTexan64 3 жыл бұрын
Nerd central.
@xtglxtgl8591 3 жыл бұрын
*I run the m6 daily, and my floors look awesome🌼 **allabout.wiki/eufy** I wet mop 2 days and dry sweep the rest of the days. When I first got it, I used the included disposable pads. I didn't like them--the dry pad has no depth so if it picks up a chunk of something, like dry cat food, then it pushes it around or drags it around the floor. The wet pad wasn't very absorbent so left streaks and wheel marks.*
Ремонт бытовой техники Кудрово | РемБытТехника77
Рет қаралды 16 М.
TightWadDIY
Рет қаралды 707 М.