Nord Stage 3 Piano Fix Keyboard dead Key Repair

No video

Nord Stage 3 Piano Fix Keyboard dead Key Repair

Рет қаралды 5,899

Күн бұрын

Here's how I fixed a dead key on a Nord Stage 3 Piano. It's not terribly difficult, but it does require a careful consideration of the internal ribbon cables.

Пікірлер: 24

@caseyholford 5 ай бұрын

For such a complex instrument it’s nice to see they have constructed them in a way that makes it pretty easy to get in there and do maintenance. Great repair!

@FrankOlsonTwins 5 ай бұрын

Thanks! Yes, pleasantly surprised that it was all very accessible. The only thing that really surprised me is how dusty it was inside!

@tomtregenza4633 11 күн бұрын

Did it today, worked great! There were a couple more pieces in the way than there were in the video (I have the 88 key stage 3, so probably built a little different), but just meant unscrewing more bits. Thanks a lot!

@FrankOlsonTwins 11 күн бұрын

Great, glad it helped!

@KyleofCarbondale 2 ай бұрын

Wonderfully produced video, and very helpful.

@FrankOlsonTwins 2 ай бұрын

Glad it was helpful!

@udumajoshua5947 13 күн бұрын

i thank you immensely i did it and my chords more than 7 came back to sound

@FrankOlsonTwins 13 күн бұрын

Great, glad to hear it!

@scottshamblin1962 12 күн бұрын

Hey, thanks for the Helpful Video! My only question is: "Should I use water for the cleaning solution?" I am going to try denatured alcohol with a Q-tip instead and maybe use mineral oil for lubricant if needed. I have a Nord Electro 5D-73 with a dead key. As a retired Electrical Engineer and musician, I'm all about DIY repairs. I'd rather not pay for parts, like a $300 power supply, which was the first thing to go. This contact cleaning maintenance would be a great preventive measure and a cost-effective solution.

@FrankOlsonTwins 12 күн бұрын

I've done a few of these now, and i still use distilled or highly filtered water. You can try alcohol, i worry about removing too much of the carbon from the rubber contact. My goal is to just remove the glossy "buildup," which a wet cotton swab does pretty well...

@andyhenderson796 5 ай бұрын

Great video! I'm cleaning mine tomorrow. I was going to use ipa but I'll use distilled water now 🤓

@FrankOlsonTwins 5 ай бұрын

Technically I used a highly filtered water, very similar to distilled. I'm sure alcohol will work fine, I just didn't want to risk any reaction with the carbon pads.

@josafatmoya4067 3 ай бұрын

this Chanel is amazing ¡¡

@FrankOlsonTwins 3 ай бұрын

Hey, thanks!

@lincemartinrincon Ай бұрын

Hello, thank you very much for your help! I'm having contact problems with two keys, but I'm having trouble fixing them. Can you tell me what screwdriver sizes are needed for each screw? thank you!

@FrankOlsonTwins Ай бұрын

#2 philips and a torx bit(i didn't reveal what size. Or, a hex key will work if it fits just right. I used a hex key/allen key that fit snugly

@akshatsgaikwad2616 Ай бұрын

I am having Roland bk3 arranger keyboard . I am also having same problem but in bass octaves 4 black keys are not functioning. And keyboard is also having chord error means when I am playing cmaj chord it shows c min 10/eb. And when playing a rhythm beat the chords section is not in proper way that it should be . I don't know what to do know . Can anyone?

@FrankOlsonTwins Ай бұрын

I *think* LB has a chip inside the head of the plug. Cut that off and it's all over....

@Jazzanomics617 28 күн бұрын

I wanted to know if I took the spring off from the key it self to clean it off how do I put the key and spring back in place

@FrankOlsonTwins 27 күн бұрын

Not sure. I'd just try to clean it with the spring in place with a small paint brush or tooth brush. I know lots of dust and hair gets caught in the springs, but I think total disassembly becomes a bit tedious/risky.