My work quality has tremendously improved through his videos. I have learned a lot n actually solved tones of problems but I don’t really understand wen people dislike his videos, does not really make sense.

What a fantastically educational video, thank you for making these

You are probably the best with small electronics I have ever seen ......Great Video

I counted like 30 secs of heat. What temp is the heat gun set to. I put mine up to like 750 degrees and it ain't comming off. You make it look easy. Also when u reapply solder what kind of solder did you. All u say is unleaded solder.

Good videos dude. I like how professional you are.

I love your repair videos. I want to switch careers now, thanks!

You doing great job👌🏻

Perfect repair 🔥👍

Great video, at the same time this is horrible that the Xbox one x has these faulty prone chips given this thing was barely launched back in 2017 or 2016 and is recent high end $499.99 USD when new so it was a premium game console and it has these faults. I've been looking into getting one but really scared away from finding this information for over a year now and just reminds me of my 2002 Xbox going bad around 2005 to 2006 leaving me very frustrated back then because my friends were also having problems with their then brand new Xbox 360s.

Anyway to find out what size smd cap that is at C36? I apparently knocked it loose when heating the IC and it disappeared.

Great job again like always

Do you know where I can find out the pins for the MN86471A? I was just checking for shorts after replacing one and I have got a couple od pins not next to each other that have continuity.

Nice vídeo. Do you pre heat the boards?

What are you applying in the beginning? Is it liquid soldering paste?

Great Job ,do know maybe what value is SMD capacitor C50 ?Thx

Does the autodetect function works with the replaced retimer chip?

I've tried using a butane soldering iron/heat gun and also have used an 18v ryobi heatgun for multiple minutes straight trying to get my ic chip off and it wont budge, any tips? Also using rosin flux with both

Hello I played games with my xbox one x and after two hours I turned it off. the day after it starts but it shows nothing on the screen but I hear the startup sound on the headset. I replaced the HDMI cable, tried to reset it using the power button and two other buttons, showed nothing on the screen. I had it for a year on the same table with the same hdmi cable on the same tv. I opened it and everything looks really nice, no damage and not dusty.

I can't get the chip off...I am using a solid rework station, at 500c and that retimer isent budging, Iv had it on the chip for 3 minutes straight and it jasent budged...

I sadly have that problem with my Xbox One X, i bought it used and when i turn on the console. And it worked fine, then after a week, It just say no signal and Black screen, i have tried diffrent HDMI cable that i know work. But they wont work on the Xbox One X enymore. What do you think is wrong with my console?

Hi I have an x box one x and I am having problems with the hdmi port it has going on for to long now so I took it in to see if they can fix it but they couldn’t so maybe you can help me please

i have a 1x with bad retimer but also r31 and r32 are missing what value are they ?

Can this chip cause no power issue/ not turning on? Also does anyone know where I can find the Mosfets for the VRM? I would greatly appreciate any help pointing me in the right direction.

Thanks a lot!

Hi. What is the exact model and size of the retimer chip please?

Bom trabalho meu amigo!

My xbox one x is having the issue where the screen constantly flickers black, should I get your services to replace my xbox's retimer chip?

what kind of Microscope can i use for think kind of repair ?

Nice work.

Its seems that the retimer ic occurs mostly when pairing an Xbox one s or X with a 4k tv. The fat xbox one never had this issues and its locked at 1080 max.

Ayuda hice esto ala perfeccion Prende pero no se ve Antes prendia y varios minutos se va la imagen.

What is happening at 4:04 ? Is he adding more solder with a standard iron? Or getting rid of excess with an iron?

Which temperature and airflow are you using? It takes a lot of temperature into the pcb

i have been watching every video and i love them , i have all the equipment, im struggling today to remove the same chip, will my hot air work its 450deg low end any tips?

Again i like ur video as obviously....

What is that gel, and is it necessary?

after soldering the chip the xbox does not start, could it be a wrong soldering? thank you

What type of tip is that and size?

The connector is not defective the defect is at the two holes that is the wool the first broken pin that you do not connect to the pin so the drive is not recognized

How much heat do you use?

HEY I NEED U TO FIX MY XBOX SERIES X IM HAVING THE SAME PROBLEM LIGHTING STRUCK RIGHT OUTSIDE MY HOUSE THE CABLE BOX AND WIFI ROUTER MY XBOX HAD A HARD WIRED ETHERNET CORD GOING TO IT WHEN THE LIGHTNING STRUCK

My console has the same problem. I was playing it today, and it just went black and said no signal.

Nice Sir 👏👏👏

Thanks for video, what gauge jumper do you use and how do i get it, thanks.

Hello, i have an xbox one x mainboard, there are missing capacitators c1264,c16 c18 beside the retimer chip, can you tell me the values of these missing capacitators, thanks in advance

Can this do the same for the xbox beta?

Great vid! and for the usb I don’t think that the magnet wire can handle the vcc on the usb try another wire! Good luck

Can you please tell me the name of the gel and the copper string please

8:50 why not just installing a software for hfs+ formats for windows?

Why don't you ever check to see if you have power coming out of the USB connector. You could have something wrong with the power connectors internally. instead of giving up after checking the caps and or resistors.

Is the Xbox one x chip the same with the one S if not ,can I still use a one x chip

What was the solution at 0:56 that looked like Vaseline before you used the heat gun? Ty

What is the name of the liquid you use?

Usb flash drives are quite easy to fix, been doing it for years anyone can do it.

I have a series x. Ive had it for about a year and suddenly out of no where im having this issue. Theres no damage to the hdmi port. I just want to know why this happens

Good channel)

How hot was ur heat gun?

What kind of solution are you using on the re-timing chip to get it loose and reattach and is it heat your applying to it both to remove and reapply

If I can get remote play to work on my phone and the Xbox is working fine but no signal on 3 different TV's with two HDMI cables, is this likely the cause of that? All cables are in the right places. I mean, if I can remote play the console is perfectly fine so it must be the HDMI controller chip or the port itself?

I had to send mine to Xbox for service. Same thing no video signal. They charged me $250. They either fixed it or sent me a very knew looking Xbox 1X 1T reconditioned unit.

Good job From Libya

i have used xbox one s and i want to know why this problem happened and if main will be in this problem one day

Big boss☺️💪👍

Mine Xbox one s boots up without any green screen and is showing just a black screen...the controller is also not connecting to the console.....i bought the console one month ago....please help me😭

what temperature do you use on the hot air?

Just had this happen to me today.have to ship it back to the states.expect better for how much you pay for it

I have replaced both HDMI port and Retimer chip and i'm still getting a no signal on the screen. Is there any other component that can be causing the no signal. The HDMI port is soldered properly and the Retimer chip as well.

What tool were you using for the heat source?

Can you explain better next time what exactly your doing please?!! Like each process, like adding flux or whatever that clear goo melts down into. Which and all tools needed or being used in this process. I have an Xbox one x that I believe the retimer chip is the issue. Have never worked on a chip board before so a little nervous. Also needing to know exactly what I will need too do this repair myself, I’m not paying Microsoft $250 plus shipping for an out of date warranty. I miss the old Xbox/Microsoft customer support where I could just call in and talk to someone. They’re new system is garbage in my opinion and makes you jump through a ton of hoops to just end up paying out almost $300. I expect a class action lawsuit to come Microsoft’s way just like the way the Disc Drive problem. Who knows, really frustrating

الله يعطيك العافية..بدنا فيديوهات صيانة لابتوب وشروح عن الخطوط والجهود

Replaced the 3rd retimer chip in 2 months. The last one worked for 1 hour. Any thoughts?

what is the goo called

why do these fail ? heat ? if so would thermal pad help

What is the liquid used to remove and put on the chip?

HI I CHANGED ic tdp158 but no signal

Would a faulty chip cause the "mode not supported" error?

How much is a repair for a Xbox that wouldn’t turn on

I HAVE THE SAME PROBLEM IN MY XBOX ONE S BLACK SCREEN AND I CAN'T FIND AT FIXED MAN 😓

How much it cost to replace the HDMI chip

My One X won't power up. No lights no sounds nothing. Could it be from HDMI retimer chip only?

Can this be a cpu problem ?

What is that gel stuff called?

Question: I had temp at 217C and air speed at 70. I tried flux and using reflow gun in conjuction with solder gun and can't get the IC to come free. Not sure what I'm doing wrong. Help.

Mine just broke 😭, at least I got 4 good years worth of playing

A x box one x retimer chip do fit a one s

My xbox one x seems to have the symptoms but only with 4K output. When it is set to 1080p it is fine. Tried different screens and cables and still same results. Any one else experience this?

How much would it cost to have you fix it?

the black screen of death or the no signal is happening to alot of people around the world during quarantine even me

An alien appeared at 2:15 on the heat dissipation pad and it was killed :( ya di3ano ken chab tayib!!

My comment was for flash drive repairs

can I mail my xbox for repair?

You'll need data cable for the middle pin (data pins). I learned it the hard way

So hard to do it by yourself

Can I send you my Xbox one x to get repaired

Big. Boos

Most of Indian waiting your videos

Who is big boss? Your father ?

+

First

dont buy the timing chip from the link in description. $50 for a $11 timing chip is insane