Gigabyte 3080TI Repair using NF.Short Voltage Injection tool

Рет қаралды 70,712

Жыл бұрын

NF.Short northridgefix.com/product/pow...
⭕ Visit our ecommerce shop and buy all your tools at northridgefix.com
⭕ Ask questions and Engage in our Forum at northridgefix.com/forum/
⭕ Need a repair? northridgefix.com/mail-in/
⭕ We are an Amtech Flux Distributor. Buy AMTECH NC-559-V2-TF Flux
northridgefix.com/product/amt...
Microscope northridgefix.com/product/mic...
UNI-T UTi260B thermal Camera
northridgefix.com/?s=thermal+...
Grinding pen
northridgefix.com/product/gri...
Low Melt Solder
northridgefix.com/product/low...
NorthridgeFix T-shirts
northridgefix.com/product/nor...
Weller Soldering station ebay.us/1mvgt5
===================================================
If you are local, drop in and say hello
NorthridgeFix
19365 Business center drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com If you are local, drop in and say hello
NorthridgeFix
19365 Business Center Drive, Unit 7
Northridge, CA 91324
Phone: 818-668-7058
NorthridgeFix.com

Пікірлер: 137

@glenroynelson8542 Жыл бұрын

ist only me or some one thinkin the same, why you dont fix your power supply chanel 🤭

@DanRing Жыл бұрын

There is a saying the mechanics car is never fixed, and a builders home is always in need of repair.

@rogerwilco5187 Жыл бұрын

He doesn't get paid for that. 😁

@codplayer5719 Жыл бұрын

We need to see that... Guys Put a like on this comment so that NF can see it😉

@NorthridgeFix Жыл бұрын

Having the NF.Short on my bench, being small, compact, and easy to use with excellent volt Amp range, I rarely ever use the Rigol. The Rigol is big and bulky with no real benefit unless third digit accuracy is important, and that is not the case for any repair business. I have 2 working channels on the Rigol. Fixing the third channel on something I'm not going to use is just a waste of time. Maybe I'll look into it in the future when time permits.

@robertpage2023 Жыл бұрын

WHAT!!!???? Don't you know that the man is busy fixing his customer's stuff!! He ain't got NO time for that!!! Just kidding............. Yeah, I was thinking the same thing but just like the plumber's family, THEY ARE THE LAST TO GET WORK DONE..............the plumber's wife does it all.

@willwalker2672 Жыл бұрын

That faulty Chanel 3 power supply would make a great repair video too 👍

@josearrasola7236 Жыл бұрын

Hello , yea I will and I’m 💯 that Alex himself can fix it with eyes closed !!!

@cajuncoinhunter Жыл бұрын

I agree..

@andrea_dev Жыл бұрын

It doesn't bring money to the company, so...

@frankiehensley2928 Жыл бұрын

You sure got your handsful with all those graphics cards. Nice voltage injection device you promoted Alex. Keep up the great work.

@DinoDiniProductions Жыл бұрын

I've been watching your videos for a while from the UK and now you got me as a customer, I just placed an order with you including NF Inject.

@darrenstrathdee7425 Жыл бұрын

I upgraded from the vc04 mechanic to this and its much better. Sits in my bench beautifully.

@randy2835 Жыл бұрын

So glad to see you back , I wish you had a asking question hotline.

@NvTwist Жыл бұрын

Just placed order for that NFShort/PSU. Been wanting and looking for a supply with those features but none fit the bill…. Now to clear off a spot for it on the bench. Keep up the great work.

@PracticalKnow Жыл бұрын

What I like to do in the case of welded on chips is to use the grinder to separate the welded on contacts from the rest of the chip, remove the chip and then deal with the remaining legs.

@rawcus918 Жыл бұрын

I like how he’s so positive and likes to say yes. We have this chip in stock but we might have a donor board right here. Everything is in stock!

@BLiNKx86 Жыл бұрын

Great to have ya back!

@pedobear101 Жыл бұрын

Great video. Thanks for sharing your tool and explaining it!

@terrymax5340 Жыл бұрын

Good work . I am sure it's going to work when you're done 👍

@TheKec789 Жыл бұрын

Alex, I am so happy to watch you become more successful as you grow your business! Your work is the best and you prevent so much e-waste by helping us repair our electronics. You also teach as you go, inspiring others to learn the intricacies of what you do to maybe repair their own devices. Fantastic business model you have put together! Keep it up!

@joshua199628 Жыл бұрын

Its perfect that you made a video about this specific topic because i was thinking about buying one of those Short-injector machine. 😎😎✅

@PeterVanHertum Жыл бұрын

I'd like to see you repair your Rigol 3rd channel 😀

@robertlucke4964 3 ай бұрын

I love watching you fix everything and I'm able to learn alot thank you for the content

@griparian 11 ай бұрын

After watching your channel, it has motivated me to learn electronics...

@trilexfix Жыл бұрын

man your scope has an amazing picture quality!!!

@williamreitinger8978 Жыл бұрын

Super job Alex!

@CooLDEaFY2023 Жыл бұрын

Good see ya Alex. Nice background that you guys moved new building awesome 👌

@alliseeify Жыл бұрын

I know a guy that can fix that 3rd channel😂

@yashveermoond1744 Жыл бұрын

Who is he

@Ron-cb7gu Жыл бұрын

I think his name is Alex...😂

@andrea_dev Жыл бұрын

Lol

@thewanderingguy5436 Жыл бұрын

@@kamm3021 nah he's gonna make it worse 💀💀 Jk

@Elberto71 Жыл бұрын

Or sell you a new one 😉

@jorganjanssen5618 Жыл бұрын

Throws donor boards in a drawer... Love your work sir!

@IV_Boi Жыл бұрын

Ur videos are so captivating…although I don’t know how to do anything u do..at least I gain the knowledge u share…I build a lot of computers and thanks to KZfaqrs such as urself I don’t need to go to fancy schools and colleges to gain the knowledge…respect…I wish I could solder and do these types of things

@samcorbin6744 Жыл бұрын

The Voltage Injection NF.Short tool is worth its weight in gold!

@laszloszell8753 Жыл бұрын

Give a like if you want Alex to make a video about trying to fix the Faulty Chanel 3 power supply.After 100 like,he have to do!

@Ainda2014 Жыл бұрын

My Hero 🎉 hope all the best to you❤

@itswoodimf Жыл бұрын

man, i am learning so much from you it's insane, can't wait to gather enough funds to buy some tools and stuff from you and see where it takes. Keep em coming, loving and learning from your content.

@AniDormi Жыл бұрын

i have one of these injection tools - such a time saver

@TwiztedJugallo Жыл бұрын

And I do not have such a tool which prevents me from diagnosing a faulty RTX2080...

@siontheodorus1501 Жыл бұрын

@@TwiztedJugallo even if you have it, you still need a thermal cam or somewhat knows the area where the heat may rose to be able to diagnose easily.

@user-fl2ug7sr3t Жыл бұрын

@@siontheodorus1501 Sometimes you can feel the heat, use alcohol , or rosin flux pen to detect the heat spot.

@siontheodorus1501 Жыл бұрын

@@user-fl2ug7sr3t yeah but you would also still need to know where the area roughly is. I think rosin flux is more effective since alcohol can just vaporize without any additional heat from the board.

@user-fl2ug7sr3t Жыл бұрын

@@siontheodorus1501 yes

@a13Banger Жыл бұрын

On a side note.. I just got the NF PCB holder, the one with the 6 sliders... THIS THING IS AMAZING!!!!!!!!!!!

@a13Banger Жыл бұрын

Ordered it today!! Looking forward to playing with this voltage injector!

@rasheed3039 Жыл бұрын

Awesome tool! 👍

@rfr653 Жыл бұрын

Good job mate 👍

@RandomAudioGuys Жыл бұрын

Is there any chance you can show us a video on Desk management, I always find my desk getting cluttered badly and I would like some ideas on how to clean it up and cord management.

@y_zass Жыл бұрын

This is why I leave my cards alone. Shaving off 5 degrees by replacing thermal paste / pads is not worth losing your warranty over. The Gigabyte Gaming OC line has 4 year warranty, this card should still be in warranty. I'm guessing they removed the warranty sticker though and couldn't RMA it. I have a Gigabyte Gaming OC 3080 12gb, I bought it for the 4 year warranty and will use it until it dies.

@mikeros003 11 ай бұрын

Great tool !

@sunsys0 Жыл бұрын

Alex I think very soon you will change your profession to either a standup comedian or go full time in e-commerce business, all the signs are very clear, 9th dimension, components playing games, you playing games with them and yes then there is the sales pitch, "Anti glare microscope with ring light" is back in stock, the voltage injection tool is back too. Whatever profession you choose Alex we will fully support you.👍👍👍

@marcyd2007 Жыл бұрын

When are you doing the video on fixing your bench power supply 5v rail?

@campkohler9131 Жыл бұрын

It might be possible to make a jig that would allow a Dremel tool to remove small amounts of material on each pass and thereby grind away a stuck chip, leaving the board undamaged.

@techpricher Жыл бұрын

Am always watching an learning even though I don't comment thank you

@randallsmith4685 Жыл бұрын

I've asked you several times over the past year about using a PS to inject voltage. Now I know.

@djdoctorstyle Жыл бұрын

Would like to see the follow up on this card.

@bignig2278 Жыл бұрын

Can you please include the input voltage for the items you sell. Here in Australia we run on 240v AC. Putting that in a 110v AC device wouldn't be a nice outcome.

@cajuncoinhunter Жыл бұрын

@big nig Most of the power supply's in those types of tools work on 90-240 volts.... That's what good about Switch mode power supply's AKA SMPS......

@NorthridgeFix Жыл бұрын

Works with all inputs 110-240

@StonyBologner Жыл бұрын

I wonder if this was one of the cards that fell subject to the “doom beta” also wouldn’t it have been under warranty?

@trilexfix Жыл бұрын

I have a question and it's been a dilemma of mine but it is true that you can't always inject voltage on a short with a DC bench power supply? I use the TEKPOWER TP3005T and i turn off current protection but I can't always boost amps on a short.

@lindarahman7337 Жыл бұрын

So for the initial volt injection is 1v right?

@suryavanshib Жыл бұрын

Awesome ✌🏻✌🏻✌🏻

@todaynews55 3 ай бұрын

What thermal are you used sir ?

@sweetestson7 Жыл бұрын

Shield removed from iPad is called "iShield" 😌

@rasungod0 Жыл бұрын

So it is just a bench power supply.

@candrmix 9 ай бұрын

is it okay to inject voltage on any component we want??

@brycehobbs3573 Жыл бұрын

I am trying to fix a Radeon rx 6800 but 12v rails on the pcie connection is measuring above 12v I think. It’s reading 1850ish in continuity mode, does anyone know what this means?

@RafalScrapper Жыл бұрын

👍

@Harry001by7 9 ай бұрын

One of the smd cap shorted on intel i7 2670 2nd gen chip, everything perfect on the board dell xps 15 l502x motherboard. Any help ?

@thedanfernando Жыл бұрын

Does it also have USB charging port?

@atsimas Жыл бұрын

From experience, put a photo of the connector as not all multimeters have the same connector interface.

@burnedik Жыл бұрын

Hi Alex.. I think your camera's setup is too close to your workstation/ or too zoomed in . Maybe you can zoom out a bit . Ty sir😉

@a13Banger Жыл бұрын

I hope there is one of these left on payday :)

@dejanpetkovski8761 Жыл бұрын

Why you don,t repair your power supply and show us what is inside that big 3 channels PSU? You can make great video. 😁😁

@steroidan Жыл бұрын

Where can we get this product if we are from Europe

@balangboy7773 Жыл бұрын

happy ramadhan alex

@gcee347 Жыл бұрын

What is the AC Voltage Input Range for the NF.Short Voltage Injection Tool?

@NorthridgeFix Жыл бұрын

110-240 works on all inputs.

@parshan Жыл бұрын

ca you explain us why do you inject voltage by 1.7 volts?

@darrylhaynes9208 Жыл бұрын

To keep the smoke in the cpu

@kpelectronics Жыл бұрын

I Know a guy who inyect always 4 volts 4 amps in phones. He said as there's a short, current will not damage since is consume by short. What's you opinion about it Alex??

@DummyLooks Жыл бұрын

If the short blows open (not that unlikely with 16W going through it) it can fry whatever is connected to these traces.

@MrThinkMaker Жыл бұрын

If some one made misstake with measurements (we are only humans) it is gonna kill every component that needs low voltage power supply: CPU, MemC, Mem and so on.

@DinoDiniProductions Жыл бұрын

Well.... there's a short... but what happens if the short burns out? Not impressed with your 'guy'.

@kpelectronics Жыл бұрын

@@DummyLooks truth, but this guy doesn't keep the current, he only give touches, that's why he trust his technic.

@kpelectronics Жыл бұрын

Also, this guy says he does that when he do not know the voltage of the line, if he does know then he inyect the line value. Another guy I follow only inyect a 3rd part of line voltage.

@eliekadi_OD5KU_KU5OD Жыл бұрын

Nice, is it ok for 220AC?

@NorthridgeFix Жыл бұрын

Yes 110-240

@mistermudpie Жыл бұрын

Maybe you could fix that bench power supply and let us watch :)

@Mimamau Жыл бұрын

Every bench power supply should be able to handle the power it can deliver.

@tschupbach Жыл бұрын

I need more practice with my thermal camera. Have the extra lens but still can't figure out what is hot and what is not. Watched the video, but still need practice

@nasko8605 Жыл бұрын

Repair your Rigol PSU for us :)

@unyimeakpan2565 2 ай бұрын

How much is the tool?

@ajayaYtube Жыл бұрын

🙏👏👏👏🙏

@shamsalfaisal Жыл бұрын

Came in for no power.

@4mulas 7 ай бұрын

MicroOhmeter is the best way to find short circuits, is non-invasive and no thermo camera needed

@n13ldo Жыл бұрын

Is the NF.Short 110v AC only?

@NorthridgeFix Жыл бұрын

110-240. Works with all inputs.

@user-jw7mk6pc2i Жыл бұрын

Привет, Алекс! Ютуб канал «майнеры в носках» рулят в видеокартах! Он прогары плат ремонтирует как произведение исскуства) Посмотри, это удивительно!

@RoyStevenUngKengSoon Жыл бұрын

Every time I see a graphics card repair I will surely watch!

@michaeltandrup3059 Жыл бұрын

To beep or not to beep. That is the question.

@user-yw5bw8cq7n Жыл бұрын

To beep, or not to beep, that is the question.

@tswellersalzer1850 Жыл бұрын

The fact the third channel of his bench power supply is broken and he didn't repair it.😀

@agoogleuser7899 Жыл бұрын

It looks as if the pad and pins get welded together.

@general23cmp Жыл бұрын

Northridge is so busy, he cannot fix his own benchtop power supply.

@fpk1954 Жыл бұрын

😎🥰👍👍👍🥰😎

@brendanjames4960 Жыл бұрын

If i worked there i would currier it to ourselfs to fix it, and see if they notice they are fixing there own stuff...😄

@ciprianpeica85 Жыл бұрын

you can test the card without 1 phase to make sure the GPU is still working. Did from experience

@corey81509 Жыл бұрын

Lol tell me how bad it is to do what im about to explain …context: im gpu mining … i have two gpus not working properly… to inject voltage i used a server psu with a breakout board plugged into a riser and the card … turn psu on and it fires up with no motherboard so its injecting voltage … i tried using rubbing alcohol to distinguish a short but couldnt find it … well maybe try rosin flux before i buy a thermal cam

@Rare_K_ Жыл бұрын

another sample for why to avoid anything gigabyte slaps their logo on

@budp.4209 Жыл бұрын

FIX !! FIX!! FIX!!

@domokos010 Жыл бұрын

Why don't you repair your power supply?

@blakeracerr899 Жыл бұрын

I owned 100 3 series gpu, Gigabyte 3080 ti & 3090 were only failures. My wallet will fail to buy another gig product.

@burakturkoglu627 Жыл бұрын

I'm looking for a job

@burakturkoglu627 Жыл бұрын

from turkey

@mayurjain392 Жыл бұрын

Spelling mistake in thumbnail, please correct

@NorthridgeFix Жыл бұрын

Thanks Fixed

@noknot77 Жыл бұрын

Ich habe diesen Kanal immer gemocht. Leider verkommt er immer mehr zu einer Verkaufsshow. So macht das keinen Spaß mehr. Hinters Licht lasse ich mich nicht führen. Nur weil das NF Logo auf den Produkten steht sind 100% Marge nicht gerechtfertigt. Schade! Mein Abo hat dieser Kanal verloren.