that ending is out of sync, maybe youtube uploading/processing acting weird

I just wanna say thanks for all your videos! Yesterday my Ps5 controller started to stick drift and I ended up switching out the potentiometer from a working donor board. I used all the tips and tricks i learned from your channel and the controller is now fixed. I have tried to do that in the past and messed up badly. Thanks to your channel, I was able to get back to gaming. I also saved the world from complaints by getting rid of the messy solder. It is now better than factory!

Its refreshing to see a business honor their warranty than make up some bs excuses. I respect this channel even more

Alex: we fixed that board. Asus: I'm back bro.

I have been in the electronic repair business since the early 90's repairing mainly TV's, VCR's and so on, I still repair LED TV's today, your soldering skills and diagnostics skills are insane, LOVE you videos, from Melbourne in Australia... keep up the great work.

The ultrasonic and IPA, is actually a way to clean some aircraft parts. I work as an airforce tech and we do it often

Good job, Alex. Great to see you stand by your warranty, even when the unexpected (repair return) happens.

Alex, it nice to see you stand behind your work and give him expedited service.👍👍👍

Alex you mentioned a viewer talking about using IPA on the ultrasonic machine, let me tell you something it works awesome, yes you are correct it's flammable so use at your own risk.

I get up at 5:00 am central time for my coffee fix and Northridge fix and never disappointed! Wouldn't mind to see some of big boss teardowns and reassembling. Thanks 😊

I just wanna say thanks for all your videos! Your soldering skills and diagnostics skills are incredible. I think about to change my business, but I have to watch more vids of you. ;-)

Good job. Glad you're not getting a lot of repeat repairs under warranty, it kind of proves your methodology works. Which is reassuring for all the component level repair people out here (myself included).

Now that's service, Another fantastic fix. If i lived in the US i would ONLY go to this shop for repairs! :)

you could have been a comedian in another life . Pretty funny stuff you say 🤣 Impeccable work 👏 Thanks for all the lessons Merry Christmas and all the best to you

Yea man u seem legit my ps5 been doin good so far but recently had a hdmi problem were it came on but was saying no signal on tv I messed with it a bit it came bk on eventually worried its early signs of my hdmi connectors going out nice to see u in Cali as I am Atwell will be sure to hit u if need to fix my stuff

We used to use Closed cycle IPA UltraSonic cleaning baths with a refrigerated top condensing fume capture at a Military PCB production factory back in the mid 1980's. we could clean boards upto 50cm wide. They are nice bits of kit, but are expensive, so not suitable for a small business.

Amazing and interesting work. Great video, thx. Happy xmas to all of you in the shop. Have nice holidays with your family. Greets

We want more videos in a day from you... 😊

It's fair. You fixed it and there was an underlying problem. Took a week to show. It's not feasible for you to test every device for 2 weeks. It all works out, nice job 👍

kind of epic, i had a acer aspire motherboard with the very same issue. thought, it took me a darn 4-5 weeks to shove my face to the controller chip. Good work, nice that you knew of the issue. i didn't

I've experienced the same/similar on digital commercial tape drives in the 80s in manufacturing in Monrovia, CA. Usually the output power devices will blow and replacement of the output transistors of the preamp will resolve the issue. In a few cases, uncommon, the pre-stage drivers of this preamp to these output transistors on this same board will also blow. The tape drives are soaked for 2 weeks, drives will usually fail well within this soak environmental test. Most common are the power transistors of the power amp, a separate circuit board with a huge heatsink. The TO3 transistors will blow probably because of an imbalance. Sometimes this will damage the output of the preamp board. Virtually all failures are power related for power supplies, controls, sensors and tape drives. Seldom does a logic (chip) fail (probably less than 1% of all failures) because back in the day things were comparatively conservative. Today chips and near components do fail, consumer goods, because they are basically overdriven or overclocked. It was a time when virtually any schematic, pictorial diagram or perhaps theory of operation could be had for any product. The days when Heathkit and others like it were still around.

Another great video, Wish I was local I am currently in Philippines but i have a MSI ge72mvr 7rg the motherboard popped a mosfet as well. Love your videos Merry Christmas and GOD bless

how do electronic components short out ? why does it short out ? what cause it short out ? a big fan of you watching every single video you upload . pls mention my question in the video or just reply to my comment . love your content because i like your personality .

Great job bro 🎉 But for more safety you can ask the customer to bring charger also and check, could be faulty charger

Keep up the great work happy new year 🎉

Btw have you thought on buying a ultrassonic machine for cleaning boards?

Respect the man who fixes the impossible. Love the videos.

معلم يعطيك العافية ، سؤال سريع: محطة اللحام الصينية اللي بتستخدمها بتنصح فيها مقارنة بالHakko 951؟ تقريباً نفس السعر.

I think big boss's job is REALLY amazing, it takes a lot of patience to dissemble an reassemble electronic devices. If you you wanna verify this, try to teardown a laptop...or a smartphone... BIG UP BIG BOSS !

What is the white almost like a light salt crust on some Parts of this board, similar as you see on a sailboat after being at sea for a short trip and getting sprayed by waves?? Ps thanks for the interesting video's that show your work

@NorthridgeFix Its not enough for the laptop to be on, you need to stress test for 15 mins to make sure that chip doesnt blow out again when under heavy load.

Thank you for sharing your knowledge. But, Alex. The A3* chip you changed should be a mosfet driver/controller. The one you looked up is a dual LDO linear regulator.

Keep us updated, if it comes back again please. By the way, I've asked many times the title of the outro tune, if you don't want to say, could you at least extend one of your videos to include the full track?

You're the man wish the best for you and your family.

I'm feeling scared to buy an Asus laptop after watching there are lots of motherboard issues.

Does the T3B soldering station come with soldering tweezers or are they available?

I'm going to have to learn how to look up IC numbers and find the associated data sheets.

I noticed a blue silicone work pad at the @13:04 time mark in the video ..... That one is bigger than the one in the web store..... I have the one that's in the web store .....But I can't find the larger ones ...... Are they available here ???

I use IPA in my ultrasonic cleaner all the time to clean resin 3d prints, it's what works best. I don't use the heating function though.

"The customer paid for expedited service when he brought it in so we're still going to give him expedited service to re-do his laptop." Puts a rush on a warranty. Not something you see very often. That right there is quality customer service. You're the man Alex.

Thank you Alex ❤

While it is not best practice it's actually a very common thing among smokeing culture to clean different bowl pieces etc with ever clear in an untrasonic cleaner and it does magic even being flammable

Great viewing thankyou.

finally my answer to where to get the same hot tweezers...

It's always good to put all repaired PC on stress test maybe for 1 hour, before shipping to customer.

So where do you get your donor boards from? Do you buy them? Leftovers from no fixes?

Keep us posted on this job

Great video.... Like always.. 👍

The video finish like 40 secs before the audio... weird thing. Still a good useful video thank you.

why does it feel like Asus is slipping in the laptop department. I had a friend who brought me his Asus ROG Zephyrus S15 GX502GV and it was running so hot, temps are at 100°C+ on load. All pads have melted and on one side of the VRM, the pads are not even making contact. A good set of high end pads and TIM lowered that by 20°C.

T3D is incompatible with hot tweezers. so it does not really compare with the Weller, right?

Hi there.. I am one of your subscriber always watching from PHILIPPINES 🇵🇭🇵🇭😊😊BTW merry Christmas to you and to your family .. If you don't mind how can I message you personally coz I have to ask questions personally

Do you repair circuit boards for GTO gate operators?

I just noticed that after 12:50 the audio and video are way off. You are talking about the PDF of the documentation of that chip you replaced while you were showing that the laptop was working. And your intro played while you were still talking about it. Also the timeline on YT ended but still kept going so for the last like 20 seconds there is just a black screen. I don't think as it's my YT bugging out as it persisted after a page refresh. It isn't video-breaking but could you please fix this? Other than that I really like what you do and I still find it amazing how quickly you can fix devices with your knowledge!

i understand your english so easily

i hope you the best buddy keep it up .

Uve got a new sub here.. Like ur vids.. Keep it up👍

That board view at 4:00 shows a lot of "muck" over the board. Do you clean such boards, as the dirt could cause short-circuits and strange behaviour.

The A37 and A3H are likely OnSemi NCP81151 MOSFET drivers. The "A3" is the real marking the last letter is month of production, so it doesn't matter.

Was i? About the ultra Sonic? Hope not, cuz to remove vaseline from motherboards after NL2 OC on motherboards works very good.

good customer care full marks

very honest re do under warranty

I have a question. I can see the use for a zero ohm resistor when you need to hop over another trace on the board, but what is a zero ohm resistor's purpose when not hopping over another trace?

Ultrasonic in IPA and even acetone is common in some industries. Just don't use heaters. Not unsafe. That said I don't ultrasonic populated boards.

Ma managed to do bad thing with my motherboard, i did not disconnect battery on MSI GF 75 Thin and shorted something with display cable. Is there any chance i can repair this ?

any upcoming episodes on the house hunt?

Alex you are sooo right on Weller getting extremely overpriced. Yes, Weller stuff ist still the professionals "wet dream" kind of tool, but as its so overpriced and not affordable - people should try to get better value/money relation from other manufacturers.

What is solution for Lenovo think center power saving mode

Same happend to my tuff 3070ti after week.. change the mosfet and in a week same mosfet again ..

Chip makers take the purest silicon crystals and make them work by introducing intentional defects. It's amazing they work at all but even more amazing is what has been driving the development all these years ... our desire to play games. Thanks for all your videos Alex. You are a true Jedi Knight with a soldering iron

Good job !

It always makes me wonder, how are you sure that there isn't a solder bridge under a chip when you squeeze it out at last heating? Is the surface tension enough to make them break apart under the chip? If the blobs flow out then there must be more than enough under to cause bridging. I'm always scared of making a short in this way, but I'm curious of your methods and pardon my ignorance if it was already answered in other videos :) I love seeing your skills and how happy you are when stuff is fixed!

i would absolutely advice against using IPA in an ultrasonic cleaner. this is used in a very controlled environment and not for the common person. it is a highly effective way for cleaning but it is very dangerous.. stay away from it if you do not know what you are doing. do not do this at home.

Thanks!

i like your point of view ;)

Man, ASUS really cheaps out on power management. Almost got an ASUS laptop in April but decided to pay a bit more for Sager. Thank freaking god...

This video is just the answer to the question of a certain commentator, why you should replace the mosfets in pairs and the driver. They should be replaced so that laptops do not return for a complaint.

Hi, what is the purpose of the zero ohm resistors in this instance?

Why have a zero ohm resistor ? Anybody please explain that to me is possible

Please I'm from Nigeria my Asus just have problem it's not display I asked many engineers to repair but I always getting the same answer I,e "isn't repair You must have to change your engine" so the big from now is we don't have the engine here. Please what should I do?

saving the world from complaints, one video at a time

imagine if big boss had an assembling channel also, super cool

Well crap.. I recently got an Asus laptop but it's a ProArt. At least Alex is getting alot of business from failed Asus laptops and with any luck he will have enough experience with them to find a surefire way to fix many of them. But I have a feeling it's sadly a case of cheap components causing the failures or even worse flaws in the motherboard. The parts shortage is a good excuse for companies as well I suppose..

I like your video's!

Superb😊

2:47 Phenomenal service right there.

You just don’t run the ultrasonic w/ heat when using alcohol. It’s a very common practice.

I like this guy , he’s good at what he does . Can you hire me ? Maybe I can sweep the floors or something

Great job

What is that site to find components and datasheets?

Nice repair.

Great double check, next time you can check 10 minutes on power mode.

That will be a lesson to that computer to stay fixed! 😅👍

Right to repair in action. Of course you'll need several years of experience and the right equipment, but it is still possible.

i have an ASUS tuf dash F15 2022 I7 12650H CPU 3070 8GB Graphics. i hope it does not fail like this one.

Maybe a stupid question, but why do they use zero ohm resistors? It is a renowned company like Asus, so you'd not expect these or?

O carregador do cliente pode estar com defeito, já estraguei um note com carregador defeituoso.

Im just so scared.. I just started working on laptop for work from home and the motherboard just got . Oh god.. This is so scary.. So unexpecting.. How am i going to work.. I've given for servicing and i dont even have extended warranty

Common sense is such a rare commodity. I thank God that my father was very hard on me and showed me common sense every minute of every day.

ultrasonic with ipa works just fine