Nothing Wasted at this Sawmill | Wood Chipper Eating Sawmill Slabs

No video

Nothing Wasted at this Sawmill | Wood Chipper Eating Sawmill Slabs

Рет қаралды 37,274

Күн бұрын

Nothing wasted at this sawmill as the wood chipper is eating sawmill slabs in an oddly satisfying way on today's episode of Sawing with Sandy. If there's something that is going to happen as soon as you starting milling your own wood, that is the creation of lots of waste. The waste wood is often called slabs or offcuts and typically consists of atleast 4 sides of each log which contains the bark. Finding a use for this slab wood is often challenging for many due to how fast it builds up. There are people who will bundle it up and sell it, while others will simply pile it up and burn it. In my sawmill operation, I try not to have anything go to waste and so I try to use it. In comes my 40hp Kioti tractor paired with my Woodland Mills WC68 wood chipper. This pair is used to turn my waste wood into wood chips which I often use on my trails to keep dust down. The size and consistency of the wood chips is quite nice for building up low spots on trails and allows me to easily improve the quality of the woodlot. If your in the market for wood chips, making your own sure is a nice alternative to having to go out and buy them. Glad you fine folks tuned in today. Let's get to chippin!
Tractor used in this video: Kioti DK40se HST
Wood chipper used in this video; Woodland Mills WC68

Пікірлер: 93

@lumberjill6598 3 жыл бұрын

Another job completed! Good job!

@sawingwithsandy 3 жыл бұрын

Crossing it off my to do list

@motorzeit24 3 жыл бұрын

*Another great Video!* Thanks for sharing!

@sawingwithsandy 3 жыл бұрын

Glad you liked the video! Thanks for watching

@Bushman9 3 жыл бұрын

Hi there Ontario neighbor. What a great way to spend a beautiful spring day outside. Firewood pile is getting a little unruly... you’ve got me thinking now. 🤔

@patrickcotter4992 3 ай бұрын

love the wood rack I built the same thing for cutting slab wood and put into ibc totes for the winter heat

@curtesamoangelos5995 3 жыл бұрын

Watched from Yosemite Kentucky. Fantastic video. Great info and detail on you equipment and setup. Thanks!

@whatscoldoing5627 3 жыл бұрын

Thanks for the informative video. I am about to update my PTO chipper and this is the one I favour. The speed control on the infeed is vital for me due to the large number of very hard wood species I deal with here in Australia. Well done.👍😁

@richragan4810 3 жыл бұрын

Thanks for sharing your day with us Sandy. I look forward to your videos as a nice break in the day. Thanks for your hard work.

@sawingwithsandy 3 жыл бұрын

Glad to hear you’re still liking the videos Rich. All the best

@lincolnstovall9471 3 жыл бұрын

Firewood processor might fit right in there between chipper and sawmill. One process at a time, one person running show. I understand. Dollars only go so far too. Thanks for your vids and honesty!!!

@sawingwithsandy 3 жыл бұрын

You’re right about a processor. Sounds like a great addition. Glad you like the videos Lincoln

@vkeshelya 3 жыл бұрын

Very informative video thank you for your time sharing it with us 😎

@sawingwithsandy 3 жыл бұрын

Glad you liked the video and thanks for tuning in

@craigleonard7715 3 жыл бұрын

Thanks for the video Sandy! You have a great work ethic and your videos are truly inspiring, especially for those of us who love and work outdoors!

@sawingwithsandy 3 жыл бұрын

Thanks great to hear Craig. Glad you tuned in

@johnbourgeois1414 3 жыл бұрын

Interesting

@matthewharvey8755 3 жыл бұрын

A great machine for sure!

@sawingwithsandy 3 жыл бұрын

Absolutely!

@chriscox6598 3 жыл бұрын

Nice weather your having. Keep the content coming.

@sawingwithsandy 3 жыл бұрын

Sure has turned out to be a nice little bit of good weather.

@wardo17 3 жыл бұрын

We have a Kubota B2650 with the Woodland Mills WC68 and it's fantastic. It's built awesome. We have tons of Cedar trees that have outlived their lives along with Ash trees that have been killed by the Ash Bore. We are going to make a bunch of trails on our land and top them off with the chips.

@LarryTait1 2 жыл бұрын

I bought their WC88, and I’m very pleased with it. I can run all day feeding hardwoods like hawethorn into it. I’m very impressed with the infeed. You can saw down an entire 4-6” diameter tree and heft the base into maw of the feed chute, snd the whole tree gets dragged through. That red safety/ direction Control is very handy

@feelingold2995 3 жыл бұрын

Great video Sandy ... Ive been looking for a 3pt chipper for a while now, been burning way to much brush. It never crossed my mind to grind the offcuts though. Awesome idea. Looks like a well built chipper, performed pretty darn good. Got lots of iron wood in 4 feet lengths standing up in the kiln to give a try on some fancy handles. Keep up the good work brother...

@sawingwithsandy 3 жыл бұрын

That ironwood sure would be some nice stuff. Must be tough as nails. Thanks for tuning in. Hope all is well

@sssqq123 3 жыл бұрын

Thanks for the great videos! I recently bought a Woodland Mills WC88 chipper and I'm looking forward to see how it performs. Wanted to upgrade from my little gas chipper a bit... :D

@sawingwithsandy 3 жыл бұрын

Yeah that wc88 sure looks like a great unit. I also had a small gas chipper and it sure was a great upgrade

@scrhino40 3 жыл бұрын

If you had a dump trailer to chip in you could then haul wood chips to where you want them and dump/ spread the chips in the area you want. Wood chipper is great. Have a great day be safe

@sawingwithsandy 3 жыл бұрын

I agree. I’ve got a project coming up just like you’re mentioning. I sure like the idea of a dump trailer.

@bwillan 3 жыл бұрын

If you happened to keep any of the plastic tanks for your IBC cages, one or two could be used to catch the wood chips from the chipper. Would be much easier to move the IBC tote around with the pallet forks on your tractor.

@sawingwithsandy 3 жыл бұрын

That’s a good idea. Unfortunately when I purchased Ibc cages I didn’t get any of the plastic tanks. I also would like them to make lids to cover my firewood. Thanks again for watching and all the best

@HeavyIronAcres 3 жыл бұрын

Hey Sandy, just found your channel and subscribed lately! Been enjoying your content. You have a good screen presence. I'm in southern Ontario and also have a wc88. Been happy with it!

@sawingwithsandy 3 жыл бұрын

Welcome to the channel! Good to hear from a fellow Ontarian. Happy chipping! Nice unit you’ve got

@FatherOfTheParty 3 жыл бұрын

That looks like a great chipper, the more chips I produce, the more uses I find for them. Trail cover is a great use.

@edgeoftheforesthomestead602 3 жыл бұрын

I keep looking into the woods waiting for Scorpion from Mortal Combat to jump out from behind a tree a yell "Get over here"

@brucefowler7218 3 жыл бұрын

Hey Sandy, enjoy your vidios I just acquired a WC 68 chipper, was woundering if you had to make any modifications to the pto shaft on for use on your tractor...I enjoy your vidios thinking you may be one of woodland mills best sales people thanks for sharing your projects

@alanatkins4315 3 жыл бұрын

Why did you put the small pieces on ground in machine to prevent trip hazards, have small chipper and keep ground clean to prevent me tripping over. Really enjoy watching you doing the work you do thank you .

@jeffweber5546 3 жыл бұрын

🤔I'm so jealous 😭 lol nice set up !!😁

@sawingwithsandy 3 жыл бұрын

Thanks Jeff!

@xdude2x 2 жыл бұрын

Gonna have to get one of these, what a machine

@xdude2x Жыл бұрын

And I will officially have one in a couple days!

@danielburke8350 3 жыл бұрын

I've had my eye on the Woodland Mills chippers for a while now. When I went back to look at them on their website today, for whatever reason they're now quoting ship dates in excess of FOUR MONTHS out.

@sawingwithsandy 3 жыл бұрын

Yeah I’ve heard similar stories all across the board with equipment like that. I’m guessing the demand for all those type equipment have skyrocketed

@tbabajan 3 жыл бұрын

I mean the entro took forever but I know some people love that. Love that thing though! You’re lovin the dream my friend! 👌🏻

@13612 3 жыл бұрын

Why not burn them for heat?

@mississippioutpost2895 3 жыл бұрын

Slabs make excellent 🔥 fire wood also. Mississippi Outpost

@erickschmidt432 Жыл бұрын

I think your slab rack is better than a trailer just for the fact you can cut the slabs with a saw. And your not bent over cutting slabs and I'm thinking the slabs stay pretty still while cutting them. I'll be making a slab rack for my sawmill. Thanks for the great videos

@sawingwithsandy Жыл бұрын

I think you're right Erick. Great working height for sure

@larrykluckoutdoors8227 3 жыл бұрын

That’s one way to get rid of them

@mr.fringeminority5426 3 жыл бұрын

If you still have the guts from some of the totes you used for firewood, they would work excellent for holding the chips until you're ready to use them.

@sawingwithsandy 3 жыл бұрын

I agree! Unfortunately I only bought the cages and don't have the insides

@bruceriep803 3 жыл бұрын

Great video, as usual, Sandy! Lots of good info and advice. I have noticed the unusual symmetry of the "forest" around you. Obviously you are located in a reforestation (replanted) area. It gives the impression of being in a cathedral, with columns in alignment. Very spiritual. Do you know how long ago that area was originally logged out and replanted? The size of the average trees around you would lead me to believe your forest is about 50 years old, or so. Just curious. Thanks! Bruce.

@sawingwithsandy 3 жыл бұрын

You’re absolutely right Bruce. I believe the trees were planted about 35 or so years ago as from what I have heard, each level of branches indicates about one year of growth. Sure is a good Forest for lumber as it matures

@pauljelen2330 3 жыл бұрын

High Sandy, I would love to have that chipper but my tractor is rated at 17.5 at the PTO. A chipper that would fit my tractor is to small for my needs so I have to rent a portable one. Anyway, are you able to adjust the size of the wood chips produced?

@duaneadams3786 3 жыл бұрын

Nice chipper I have the exact same one it takes care of all my brush and limbs I acquire

@sawingwithsandy 3 жыл бұрын

Sure is a great unit ! Thanks for watching Duane

@ggallman 3 жыл бұрын

Why place the chipper so far from the material to be chipped?

@sawingwithsandy 3 жыл бұрын

I needed to wood chips to fall in a location that my bucket could easily pickup and if I back up further there’s a stump that the wood chips would get piled onto. I didn’t want to have to dig around it

@larryrecoy8198 3 жыл бұрын

fire wood!

@sawingwithsandy 3 жыл бұрын

It does give good firewood as well. If I didn’t already have 5 Ibc cages of the slab wood for firewood already I’d likely do that

@exotictones1054 3 жыл бұрын

Like to see how she does w hard wood.most of mine is hard wood.did a great job on your spruce.

@joellemire3630 3 жыл бұрын

Hi Sandy, Do you sharpen your own blades? If so, that could be another video.

@stevengullison5123 3 жыл бұрын

Hello sandy, I want to buy something like your mill .I live in N.B. so I probably would have to get mine out of Nova S. Thank you for taking the time to video from Steve Gullison st.Stephen N.B

@Mickey-we1vh 2 жыл бұрын

Hi Sandy, nice job. What do you do with the wood chips?

@ianblott6342 2 жыл бұрын

What is the largest slab you can put in that chipper? Some of the slabs I get are a quite wide and jam in the shoot of my chipper.

@terrycarl8923 Жыл бұрын

Do you use your chipper enough to warrent the cost of one? I'm looking at buying the same one you have but the only use I have for it is to chip slabs and my slabs are all hardwood

@sawingwithsandy Жыл бұрын

Hi Terry I find I use it quite a bit for all the brush and slab wood I’ve got around here

@TheOldManAndTheSaw 3 жыл бұрын

I want one of those! BTY where is your white ground cover?

@sawingwithsandy 3 жыл бұрын

Sure is a handy unit to have around. Lucky for me the snow is gone for a few months. Just hoping it’s a bit longer than normal until I see it again

@dannyatwood7266 3 жыл бұрын

It's hard work being a good steward of the land and resources. Good job bud. Thanks for your video I ordered a new HM122 I have been looking for year's. With the wood prices this year I pulled the trigger your video helped me with what brand. Keep up the good work

@sawingwithsandy 3 жыл бұрын

Glad you tuned in Danny. Yeah those wood prices are crazy. Sure will make your sawmill pay for itself quickly. Happy sawing

@barrelfish8106 3 жыл бұрын

how often are you greasing the chipper?

@sawingwithsandy 3 жыл бұрын

I’d say after every long day of use

@barrelfish8106 3 жыл бұрын

@@sawingwithsandy Ok, way more often than i was thinking, thanks! The zerc fitting on the top/back of the chipper wheel, when i grease mine, i'm not seeing where the grease comes out. how many pumps are you giving that one?

@danielvachon7994 3 жыл бұрын

Sandy can you list what camera equipment you use to make your videos? Thank-you.

@rickcoleman8903 Жыл бұрын

Looking at woodmaxx with hydrostat infeed which runs cooler than the hydraulics and American made.

@sawingwithsandy Жыл бұрын

Right on Rick. Happy sawing!

@hitied1 Жыл бұрын

I bought the WoodMaxx 990 and love it. I’m chipping my mill slab wood into a dump bin, mounted on a trailer. It holds 3 yards

@finnherbert9159 3 жыл бұрын

Nice videos, always thinking how comes you never have any help? One one else working with you... working using dangerous tools and no help if something goes wrong

@sawingwithsandy 3 жыл бұрын

Unfortunately I don’t have anyone available to help with the chores. In a perfect world I’d have help with most tasks but unfortunately I don’t and so rely on my cell phone on the event of emergency (and working safely of course)

@savetherepublic9124 3 жыл бұрын

you would get done a lot quicker if you didn't take so many coffee breaks lol.

@ColdFlame23 3 жыл бұрын

Maybe you've covered it before in an older video that I haven't made it to yet, but may I ask how big your property is? Are those pine trees planted by man? They seem to be very linear, so that's why I ask. Anyway, I've been looking at this wood chipper too while I wait for my saw mill to show up. I have a '09 John Deer 4320 (48hp at the motor) and have 33 acres of forest. We've recently done some thinning as part of wildfire mitigation plan, and I'd certainly love to be mulching up branches and putting the organic material back on the forest floor to trap moisture and improve soil conditions. It's nice to see some real world uses for the machine!

@sawingwithsandy 3 жыл бұрын

Hi Jeremy. Where you often see my filming is about 40acres. Those trees were planted about 35 or so years ago I figure. Thanks for tuning in and all the best

@sawingwithsandy 3 жыл бұрын

Sounds like a great tractor and plot of land you have. I also am trying to bring my forest back to natural over time with selective cutting. At the rate I cut trees sure will be a while for that to happen though

@louisst-laurent9113 3 жыл бұрын

I need that wood chipper Sandy lol but I am way too cheap lol 😂 jokes aside i think i will look into this product for sure

@sawingwithsandy 3 жыл бұрын

Don’t worry, I’m also pretty cheap. Took me a lot of convincing for me to talk myself into buying this haha

@karivepsalainen5817 3 жыл бұрын

That is wasting. Good firewood goes to chips. Greetings from Finland anyway.

@sawingwithsandy 3 жыл бұрын

I’ve got 5 full Ibc cages of slab wood as firewood right behind my tractor and firewood logs everywhere and so I end up making these into something I need which is the wood chips

@sawingwithsandy 3 жыл бұрын

It does make good firewood like you mentioned however. Thanks for watching, Finland sure is a beautiful area

@russellbelliveau1694 3 жыл бұрын

This is interesting, so the logging trails you have that are muddy and wet do the chips dry it up well? I have many and never thought of doing this. I always thought you need rocks and gravel to properly solidify them but I could see this work. Thanks for sharing always enjoy watching.

@sawingwithsandy 3 жыл бұрын

I find the chips keep my tires on lighter vehicles from creating ruts. It also allows for me to groom the trails with my harrow behind the atv

@karivepsalainen5817 3 жыл бұрын

@@sawingwithsandy Good dry firewood is like having money in bank. It is worth money years after cutting. I know that you have a problem with waste slaps, so you need an engine like this: kzfaq.info/get/bejne/aLGdp82V3ZrOm6M.html . So you don't need to store slabs, just make firewood at once. And directly to bag. Make chips from waste wood like branches and small diameter wood, not from firewood.