Nova build Episode 2: Speedway Motors Gasser kit

No video

Nova build Episode 2: Speedway Motors Gasser kit

Рет қаралды 13,576

Bobbyb918

Күн бұрын

In this video I bolt on the Speedway Motors Gasser front clip. It was actually a pretty easy process.

Пікірлер: 13

@OneMoreBolt 6 ай бұрын

Bold move with the white, I like it.

@TheBobbyb918 6 ай бұрын

Since the car was painted white I figured why not just go with it. Should be easier to find leaks.

@OneMoreBolt 6 ай бұрын

@@TheBobbyb918 well, not sure if they will be easier to find or not, probably, but for sure it will be easier to notice when they start.

@robdollich3849 Жыл бұрын

those are tapered roller bearings in your rotors,they cant be tight,they need to be loosened after seated down tight or they will soon fail,loosen the nut until you just can actually feel slack,then put your key in.

@jonahguitarguy Жыл бұрын

It's been a long time since I was a professional wrench. But yes I was thinking he was going way to tight.

@TheBobbyb918 Жыл бұрын

I believe I backed them off a quarter of a turn but I will definitely check them before I drive it. I may need to back them off a little more. Thanks for the info I appreciate it.

@user-gz5kd4os3v 7 ай бұрын

bob you need to make the rod from the steering box and r/s spindle parallel to the tie rod bar so you dont get bump steer

@TheBobbyb918 7 ай бұрын

I can agree with that hopefully after a roll the axle back some to set the caster right and get all the weight on the car it will level out some. Thanks for commenting. I’ll take all the advice I can get.

@user-gz5kd4os3v 7 ай бұрын

get a dropped pitman arm and or a longer bolt grade 8 with a spacer and attach it to your spindle . good job so far

@TheBobbyb918 7 ай бұрын

That is a drop arm it came with the kit.

@quadekaras8124 Жыл бұрын

Are you gonna run the speedway 64 fender well headers? I can’t seem to find much else that work with the speedway solid front end kit. Either hit my steering linkage or support arm off the firewall. I’ve tried a tri 5 from patriot, don’t work. And I’ve had the speedway 64 gasser fender well headers but I was worried about how close they were to my master cylinder so I sent them back, starting to look like my only option other than custom. Thanks man keep the vids coming

@TheBobbyb918 Жыл бұрын

I’m planning on running speedway headers, but If you find something better please let me know.

@The3rdWiseMan1 Жыл бұрын

But some reflective heat tape on the master