Nova GTS1500 wood chipper
Рет қаралды 23,602
3 жыл бұрынThis shows how this chipper handles junk dried out branches and limbs. The belt guard is removed because it's being modified so that you don't have to remove the fender and tire in order to check the belts. The hitch has been flipped and reversed so the unit can be towed with a lawn tractor.
@avontaprice-lg7ws Жыл бұрын
Do trains be coming by on those railroad tracks behind you or not?????
@StuffBobbyDoes Жыл бұрын
Yes. There are three sets of tracks, and I wave at the engineers.
@Johnzottel 3 жыл бұрын
First Run? Hardcore Test😁🤘
@StuffBobbyDoes 3 жыл бұрын
Yep. Still working on the mods.
@Johnzottel 3 жыл бұрын
@@StuffBobbyDoes I bought the same chipper in Germany for 1800€ you get the blow back from the wood you get away when you put the counter-cutting very close to the rotating knives Sorry for my eglish (translator)😁
@StuffBobbyDoes 3 жыл бұрын
@@Johnzottel I didn't get much blow back at all, just with large short pieces that I let free-fall into the chute.
@danfriday1968 Жыл бұрын
Are the blades adjustable on this ?
@StuffBobbyDoes Жыл бұрын
@@danfriday1968 The blades are not adjustable but the anvil is. I reset them to the factory setting of .080. Huge difference.
@gregburke4045 3 жыл бұрын
Is it legal to road tow or not
@StuffBobbyDoes 3 жыл бұрын
I would say not. It's even a little squirrely behind the lawn tractor.
@gregburke4045 3 жыл бұрын
@@StuffBobbyDoes Thanks for reply i was not to sure thinks would require axel about 4ft wide to be safe merry xmas
@StuffBobbyDoes 3 жыл бұрын
@@gregburke4045 Yeah, the tires are nice too but the spacing is only about 28". And that chute is heavy so it's a little top heavy. Merry Christmas to you too.
Otiss Machines
Рет қаралды 28 М.
Otiss Machines
Рет қаралды 55 М.
Otiss Machines
Рет қаралды 17 М.
Der Kompressorschrauber
Рет қаралды 64 М.
Đen Vlog
Рет қаралды 23 МЛН