The firewall tip was golden! My NVEM did not make contact. I tried everything, even reinstalled mach (noob). Thanks.

Did you ever get the servos working? Found out my jmc servos will not work without a firmware debugging tool to calibrate them. The download isn’t available anywhere atm.

Thanks for the video. How you have connect the output? Do you have schematic?

Hi how are you?

i would imagine that running this via a powerline cable adapter and via a switch and a pfsense firewall would work, instead of direct ethernet cable pc->stepper?

Can it be used for 6 axis robotic arms?

I have massive problems with the G31 command and the NVEM V2 controller. The controller will not stop the movement in 50% of the cases when probe ist triggered. Do you have a suggestion to fix this.

would really like to see a video of hooking up the 3-10 outputs to relays cant seem to get it to work, and alot ofh other people too. and mice video by the way

Does this come with a smooth stepper built into the board? Also are smooth steppers and CNC control boards the same thing?

can you help me? my problem is that when ich choose the novusun plugin during the start of mach3 , the motortuning will not running an an error accures the software and the the software ist not running.

Здравствуйте! У вас брали этот контроллер, но он имеет множество проблем: таких как невозврат домой, выход за пределы допустимого, не работают soft limits, частые зависания и другие проблемы. Пришлите ссылку на обновлённый и исправленный файл Novusun.dll.

what is index, pin and port number, thank you. " the information sheet says port 1, pin 0 but it's not correct "

Essa controladora tem entrada para encoder incremental

device not ready.sometimes works sometimes lost comunications and motors lost control

Thanks for the video. One question what makes mach3 connect enable 1 to th X axis? I do not understand how to assign it to a specific axis. I am getting the same JMC servo (200w version) and from the diagram I see you need to connect an enable signal for each axis. If you activate 3 enable outputs, how Mach3 assign them to the axis? Are the Enable signal always the same so if you have 3 activatede will be the same signal across whole of them? Thanks

Can I use this card WITHOUT Mack3, writing my ow app using Visual Studio C# ??

Perfeito! Ajudou um brasileiro!!

I'm struggling with the index, I can't seem to get it to light up. If I short it with another input it will but otherwise I can't seem to trip it. I tried using port 1 and pin 0 and nothing. It detects rpm, but that doesn't help for indexing lol. Any ideas?

nvum i choose bin, can i fix it?

Hi! is this Novusun board is suitable for plasma cutter?