Now that’s how you teach Extruded Boss in SolidWorks!

Рет қаралды 36,443

Күн бұрын

Watch my 1-Hour free course ► bit.ly/SolidWorksCoursePro
After that, you can consider checking out my ultimate SolidWorks Course.
Ultimate SolidWorks Extruded-Boss/Basse tutorial for absolute beginners up to professionals.
In this video, you will learn to work with every single option offered by SolidWorks' Extruded-Boss, as well as extruded-cut that comes in its property manager's tab. Most people do not use the 'from' section but you will learn how and when to use that to your advantage to save some modeling time.
Hi, my name is Ryan and I am the owner of SolidWorksTutorials, this very channel you are on! You're welcome. SolidWorks is my passion and I love to teach it to people who love to learn it.
Also, if you like to practice more, make sure to sign up to my website where I put weekly premium tutorials for beginners.
Website: solidworkstutorials.net
Membership: solidworkstutorials.net/plans...
Tutorials: solidworkstutorials.net/produ...
This Channel contains topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketch
- SolidWorks Surface
- SolidWorks Motion
- SolidWorks Weldments
- SolidWorks Mold Design

Пікірлер: 40

@with-Aryan 3 жыл бұрын

I have a great webinar that is free and you can watch it here bit.ly/SolidWorksCourseProForBeginners

@xtra-air 4 жыл бұрын

awesome job Ryan, thank you so much

@johnbenson4927 4 жыл бұрын

Excellent video dude, thank you

@raulll95 4 жыл бұрын

Man, you are awesome ! :) I want to congrats you for your awesome job you are doing, so you just beat up any other SolidWorks tutorial with your knowledges and your way how to teach ! SO YOU, YES YOU (I know, I'm not using enough "you" LOL) KEEP UP THE GOOD WORK !

@with-Aryan 4 жыл бұрын

Thanks Raul, lots of compliments there

@saamatriyan6684 3 жыл бұрын

Thankyou for this video, it was very helpful

@with-Aryan 3 жыл бұрын

You’re welcome 😊

@jeffmatthews9125 Жыл бұрын

Thanks for the video!

@with-Aryan Жыл бұрын

You're welcome!

@Copozeras 4 ай бұрын

good video , man. thank you

@with-Aryan 4 ай бұрын

Glad you liked it!

@vahidmirzaei3554 3 жыл бұрын

That was awesome thank you very much

@with-Aryan 2 жыл бұрын

Glad you enjoyed it

@xhaxhimiti 8 ай бұрын

Excellent Thank you

@with-Aryan 8 ай бұрын

You are welcome!

@zaqirhussein1955 2 жыл бұрын

outstanding

@jubara195 10 ай бұрын

Beautiful explanation. I was hoping you would talk about extruding from surface, face, plan

@with-Aryan 10 ай бұрын

Thank you for the kind words.

@Raj-gp8vs 3 жыл бұрын

great .

@sasangavangi9776 2 жыл бұрын

Thanks a milliom

@alializadeh8195 3 жыл бұрын

Thanx

@with-Aryan 3 жыл бұрын

you're welcome

@with-Aryan 4 жыл бұрын

If you are interested in a full SolidWorks course sign up in my website to get notified about the release date www.solidworkstutorials.net/

@22killerj Жыл бұрын

Can you or anyone explain when using extruded boss/base feature to extrude a sketch (in this instance a rectangle) up to a surface It will give a rebuild error and say the face cannot terminate the extruded feature, but if i change the size or location it works.

@with-Aryan Жыл бұрын

too specific. Have to see your file.

@bpetnoi1472 2 жыл бұрын

Great vid. I think you missed one really important idea and that is the "re -using of a sketch". Take for example two circles one inside of another. If I extrude the inner circle out into a shaft everything is fine. Most beginners will then make a new plane and redraw the larger circle to extrude it out the other direction to make the shaft diameter larger or they will not draw the larger circle at first and draw it on the end of the first shaft as a larger circle and extrude it out the other direction. Many people do not understand that many elements of a part can all be drawn at the same time and then sections of them can be used to either extrude or cut the part as needed without drawing more sketches.

@Robinlarsson83 Жыл бұрын

Well, yes, you can do that, but actual professionals doesn't do that. It just makes the model harder to edit and you risk getting unexpected problems. A sketch should only contain a single contour, with the exception of construction lines of course.

@JingDong-md7mp 6 ай бұрын

After I do the Extruded Boss/base, I get a transparent block rather than a coloured one like how you showed. How do I change this setting?

@with-Aryan 6 ай бұрын

First restart your SolidWorks

@with-Aryan 6 ай бұрын

If it still persist, then it’s a graphical error probably caused by your hardware

@mcgarry_92 2 жыл бұрын

What if you need to extrude parts on the same place to different lengths individually?

@with-Aryan 2 жыл бұрын

what do you mean? Like extrude a sketch with different height on each of its sub closed-areas?

@mcgarry_92 2 жыл бұрын

@@with-Aryan Yes, it’s okay though I found it out! Just had to open the menu at the top left and then it would let you individually select shapes. Thanks anyway!