Now THIS is bang for your buck! - Elegoo Neptune 4 Pro

Рет қаралды 405,181

Күн бұрын

Thanks to Elegoo for sponsoring this video and sending us the Neptune 4 Pro to take a look at in person. Check out Elegoo and their line up of 3D printing products using the link below and use the code MKT_ShortCircuit to get $10 off your order:
www.elegoo.com/pages/elegoo-n...
Does cheaper mean worse? Absolutely not the case with Elegoo's Neptune 4 Pro. It has everything you need to get started on your 3D printing journey and then some, all at a reasonable price point.
Purchases made through some store links may provide some compensation to Linus Media Group.
Want us to unbox something? Make a suggestion at lmg.gg/7s34e
► GET MERCH: lttstore.com
► LTX 2023 TICKETS AVAILABLE NOW: lmg.gg/ltx23
► GET EXCLUSIVE CONTENT ON FLOATPLANE: lmg.gg/lttfloatplane
► SPONSORS, AFFILIATES, AND PARTNERS: lmg.gg/partners
► PRODUCTS WE USE ON THE SHORTCIRCUIT SET: lmg.gg/scset
FOLLOW US ELSEWHERE
---------------------------------------------------
Twitter: / shrtcrctyt
Instagram: / shortcircuityt
TikTok: / linustech
Facebook: / shortcircuityt
CHAPTERS
---------------------------------------------------
0:00 Intro
0:27 Unboxing
5:10 Assembly
12:03 Filament
13:46 Automatic Cycle
16:30 Let's Get Printing
17:33 DONE!
19:34 Klipper
24:10 Print # 2
26:03 Outro

Пікірлер: 805

@ZackMuffinMan 10 ай бұрын

LongCircuit

@autofocusphotos 10 ай бұрын

We had the exact same idea for a comment lmao

@sillyWillieBilly 10 ай бұрын

This one actually though was informative and covered everything. I didn't mind this one at all.

@christophercannon769 10 ай бұрын

That's what she said

@JackyAnimations 10 ай бұрын

Lol

@Ripinda1911 10 ай бұрын

Shortn‘tCircuit

@Metal_Maxine 10 ай бұрын

"I hope it's not [something] lined - that way you'd die of neurotoxin poisoning" - Dan, as ever the cheerful member of the LMG team. The first time I saw him, he recommended doing electrical repairs standing on a metal chair because "if you get it wrong, they can't make you do it again"

@SUPER_ZOMBIE 10 ай бұрын

LMAO I remember this! I don't remember what video it was from though

@bubbledoubletrouble 10 ай бұрын

PTFE, aka Teflon. When heated to very high temperatures the fumes can be toxic.

@BAoxymoron 10 ай бұрын

Dan, the Lumalee of LMG

@kingdraconias 10 ай бұрын

@@SUPER_ZOMBIE It was the one where he was helping Linus setup his new living room's VR setup. And what he said was something more like "If you mess up, you don't have to go into work tomorrow."

@MowMdown 10 ай бұрын

@@bubbledoubletrouble FYI - If you, or anyone reading this, ever uses the "self-cleaning" mode on your oven, you need to open all the windows, remove any persons and pets until the cleaning is complete because it does burn the PTFE lining off.

@sstalder5 10 ай бұрын

Can Dan just have his own LMG maker channel at this point? He's got so much knowledge to share and I feel like it'd be an instant gold play button to add to the collection.

@shanematthews1985 10 ай бұрын

Linus Maker Tips, where we make just the tip

@wobblysauce 10 ай бұрын

Dan needs to re master the Christmas music

@Cobyc5150 10 ай бұрын

I can hear it now, " welcome back to the shop to another episode with maker Dan. Today we will be.....

@BenCos2018 10 ай бұрын

Facts I'd watch his channel for sure

@Kyle496 10 ай бұрын

@@BenCos2018 I'll not be making anything but for whatever reason I'll probably watch everything he's showing off.

@user-dj2zy2wb8z 10 ай бұрын

Can Dan review a handful of printers and give us his suggestions at each price point?

@evilgremlin 10 ай бұрын

Well if you want most incompetent reviews... And he admits complete incompetency by "my home printer runs at 30mm/s"

@imapotato5927 10 ай бұрын

@@evilgremlin yeah and when he said the heat sink fan was for part cooling

@blacknovella 10 ай бұрын

as a hardcore resin and fdm enthusiast. Dan knows his stuff I want dan doing more of these.. he knows what he is talking about.

@MonkeyWithAKnife 10 ай бұрын

Or MandicReally, Modbot, CNCkitchen, 3DNero, 3DPrintingNerd or one of the many other channels focused on 3d printing.

@blacknovella 10 ай бұрын

@@MonkeyWithAKnife i too am in many of their communities :)

@OrDuckVet 10 ай бұрын

I like to picture Dan reviewing random things in his home. “Well, this fork is a bit small, but I mean, well, it’s fine.” 😂

@yohojones 10 ай бұрын

I could listen to Dan review anything. So calming. Great episode.

@ssl3546 10 ай бұрын

I like how Dan has basically taken over Anthony's (RIP) function at LTT. Dan started as this unpleasant sarcastic guy but he's mellowed out at alot.

@Internetianer 10 ай бұрын

@@ssl3546 rip? o.o

@JWF111 10 ай бұрын

@@InternetianerAnthony is a lady now I think, so no more Anthony

@verakoo6187 10 ай бұрын

Not a review

@Internetianer 10 ай бұрын

@@JWF111 that doesn't really change who they are as a person though

@my_alibi 10 ай бұрын

For $300 that is an outstanding value.

@privacyvalued4134 10 ай бұрын

Yup. This is the first PLA 3D printer I've seen that actually makes sense and looks pretty solidly engineered. It's a shame it's just a PLA printer. I'd love to see a desktop metal sintering 3D printer at $300. Currently, metal sintering printers run about $12,000 on the cheap end and easily push $100,000.

@Leesboringlife 10 ай бұрын

I just looked it up and was like WOW!!

@hazonku 10 ай бұрын

@@privacyvalued4134 True. I remain hopeful laser sintering printers will find their way down to affordable prices one day like FDM & resin did. As stupid and wannable Apple as Formlabs are I will give them credit for making the first effort in making at least nylon sintering printers that are more in the small business/rich hobbyist price range.

@edenassos 9 ай бұрын

@@privacyvalued4134 Choosing beggars.

@sxmtaekwon-do7685 8 ай бұрын

metal sintered for $300? dude.... are you even serious. LOL @@privacyvalued4134

@PeteyBoy23 10 ай бұрын

I love these videos where someone absoutely knows their shit with a particular product. I don't know jack shit about 3D printing, but I'm sold on this product based on Dan's assessment, and I understand why this is great. Very well done.

@Brandon-jf9cv 10 ай бұрын

He actually knows very little. He called the heat sink fan the part cooling fan and he says his printer at home can only do 30 mm a second if you’d like to see 3d Print reviews there’s a lot better you can do not saying his is bad there’s just gaps in his knowledge.

@mads6103 10 ай бұрын

@@Brandon-jf9cvAgreed, could be way worse though

@juts89 10 ай бұрын

It's a sponsored overview, absolutely do your own research

@tonim.9460 10 ай бұрын

@@monki_sudoafter two weeks? wtf you're lubing it with? water?

@BeefIngot 10 ай бұрын

ugh. Don't be tricked my dude. He is absolutely not an expert by any means. Many many inaccuracies and misses. Not his fault, but don't take this as the be all end all source. Heck, don't even take the recommendation

@sturdybutter 10 ай бұрын

Now this is a 25 minute shortcircuit I can actually get behind!

@Shynd 10 ай бұрын

The tiny fan in the hotend is for cooling the heatsink, the two fans on the side are layer cooling fans.

@tjCooper88 10 ай бұрын

Came here to say this. Why would you ever have two fans blowing at each other for the heatsink cooling 🤦🏻

@s4nari 10 ай бұрын

Thanks to Dan for hosting today's video.

@GeneralRasp 10 ай бұрын

I love when Dan gets to review 3D printers. Always enjoyable and informative. I would love to see him do a general trouble shooting video for FDM printers.

@ricknaam5658 10 ай бұрын

shortcircuit doesnt do reviews, this is an initial impression

@sven2701 10 ай бұрын

Agreed. First time I've watched one of his videos, super informative. Subbed

@koybuscho5880 10 ай бұрын

Mine just got here 4 days ago. It’s a fantastic printer. Done some complex prints like castles and stuff at full speed (250mm/s) and it KILLED IT. Amazing value!

@BeefIngot 10 ай бұрын

You almost certainly did not. It's a common beginner mistake and I'm not the least bit judgey, but you should know at any usual layer height the hot end wouldn't be able to keep up, and the printer would never actually be able to hit top speed unless you cranked the accelerations so high that the print came out looking awful other than literal straight diagonal lines across the whole bed.

@droniedj557 9 ай бұрын

But the Bambu lab X1 does a great job? It isn't that unbelieveable.@@BeefIngot

@xvr6036 10 ай бұрын

The best part of WAN Show, and now, the best part of ShortCircuit 👌

@peeonthe3rdrail414 10 ай бұрын

Pshht everyone knows the best way to do it is to buy an ender 3 for $250-$300 and put $400 worth of upgrades into it.

@MrAlucardDante 10 ай бұрын

That’s exactly what I did 😂. Although I payed 120€ for my ender3, and only spent 250€ for upgrades (raspberry for klipper, 32bit mainboard, 3dtouch, linear rails, direct drive and dual z)

@ReaperUnreal 10 ай бұрын

I was fully expecting this to be $600+, seeing it at $300 makes me seriously consider it.

@TheTonie4 10 ай бұрын

@@monki_sudo This isn't meant to be a real review in the first place, these are just overviews of the products essentially, especially with this people a sponsored one.

@talharoxen 10 ай бұрын

@@tombeardy4833 Is that good?

@Digitness 5 ай бұрын

@@talharoxenit’s like a cult. Bambu lab has almost gained a following like apple. Apparently they are good

@99956563232 3 ай бұрын

Just bought one. Excited to see what it does.

@nicksterspad 10 ай бұрын

Great video! I love how it feels like the editors are allowed to try to express their personality with funny clips but their editing doesn't distract from the content.

@beardedgaming3741 10 ай бұрын

can you please make a how-to for setup? ensuring things are square, that motors are stepping correctly, that beds are level, that hotends are flowing properly... from square 1

@rux_ton 10 ай бұрын

This was my first short circuit video, never really wanted to venture here and boy was this a BANGER video, kinda swayed me towards this as a secondary printer. Ive been teetering between this and bambu labs p1p (look i want the companion cube ok)

@blackeyespecialist88 5 ай бұрын

Bought this for my wife for Xmas. I was having second thoughts about this printer after I bought it,but your video made me feel much better. I was actually able to understand what you’re talking about. BRAVO man

@Dramaican88 10 ай бұрын

It is very nice to see and quite obvious that Dan's knowledge around 3D printing has improved and grown a lot and in a relatively short time! Also really nice to hear that the engineers at LMG are using Vorons. This great as a "first printer with Klipper" option for newbies and I hope printers with stock Klipper that are this affordable reach "ender 3 status", especially since they seem to have a better out of the box user experience. It used to be that consumers would buy an ender 3 and then in the first 5 minutes they started ordering upgrades and printing modifications to make the printer actually print well. I am happy that those days are gone and now you buy a 300$ printer and you can actually have some nice prints without any need for modifications or fixing issues.

@CanuckCreator 10 ай бұрын

`We run it in our creator warehouse for our little Vorons` How is this the first time ive heard of LTT running vorons? lol

@takuya2431 10 ай бұрын

The best comes last i guess :hehe:

@hyun-shik7327 5 ай бұрын

I just got this for Christmas thanks to your recommendation. I made my first of many things.

@timsoft3 8 ай бұрын

i bought one of these as a first 3dprinter based on the review, and some yt vids showing that it wasn't impossible to do 3d cad. Apart from a slight challange with the initial manual levelling, it's been great; easy enough to setup, and use. the network acess is only while printing, which is worth mentioning. the money off discount is available directly. Its taken a little while playing around with settings to get precise holes and first layer for latest version of cura, but it seems to be quite capable. It can handle abs and nylon as well as the usual pla.

@Anyobservation 10 ай бұрын

Dan is one of the best, if not the best host at LMG. Always lots of humor and knowledge while casually being well spoken and easy to follow.

@DanielSalley3D 9 ай бұрын

FInally got my 4 pro. I was as concerned at home the head would move itself to death but the speed the bed moves really is amazing, it'll prevent the head unit burning out the rails ! Great printer, even compared to the Bambu its amazing for the money!

@dylanstorts4327 10 ай бұрын

I want Dan to get more Short Circuit content to the market. He is thorough and funny and I love it!!

@Wink_FingerGun 10 ай бұрын

Waiting for mine to get here. So thankful you guys did a review. Thank you.

@spivzit8754 10 ай бұрын

Incredible first impression video you did great. Elegoo as a brand has included a lot of the same features and kit to their last couple of generations of Cartesian printer and that's why i tend to recommend them to new users. Other brands you have to upgrade to get the same features when elegoo just realized that this is what people like. The upgrades on this printer is wild with the speed and rails and I'm quite intrigued. Pla+ had been my go-to material for many years since it's the easiest to print with. It's consistent. It's tough and rigid and I can hold some very tight tolerances when prototyping and making fixtures for the shops I work in. 10/10 all machinists and engineers get in to 3d printing as an additional tool in your belt.

@RahulJC 10 ай бұрын

I pre ordered this.. already have the Neptune 3, absolutely love it. Looking forward to the 4pro.

@elone3997 10 ай бұрын

Nice review Dan..I have literally no experience of 3d printers so to me they look like pure voodoo..the speed that thing was moving was crazy!

@SmallDisturbedChild 10 ай бұрын

I'd love to see Dan do a review of your Voron setups and any mods you might have done, though that being said there is a lot do dive in to with vorons. I have a 350mm Voron 2.4r2 and love it.

@x9x9x9x9x9 10 ай бұрын

Toss in a CHT nozzle and that printer looks like it might be a winner. Its really nice to see cheap printers coming to market with klipper installed so we can print fast. There hadn't been any major advancements in FMD machine in the past 4 years aside from volcano style hotends. Like there have been a few smaller things but now with klipper, Volcano, and CHT nozzles we can actually print really fast. Eventually my sidewinder x1 will die and the neptune 4 pro might be my next printer

@CuttinInIdaho 10 ай бұрын

The little fan by the nozzle is to keep the heating block from over heating and to keep temperatures within range. The one on the left and one on the right side are for layer cooling with the big blower accompanying those.

@jameslewis2635 9 ай бұрын

Nice to see someone like Dan doing a review like this. He comes off as someone who knows his stuff, at least where it comes to 3D printers. It also makes a difference that he is throwing things on the floor rather than randomly dropping everything he touches.

@antigravityinmotion 10 ай бұрын

great job Dan🎉 I really like your printer videos 👍 the video so packed full with interesting details, so I don't care its not "short" - it could 2h and would watch it completely🫶 I vote for more Dan videos❤

@technewb8241 10 ай бұрын

Ordering it. Thank you, Dan

@marcusansell9713 10 ай бұрын

Really enjoyed the full in depth video great informative content 👍

@clementfrance2905 10 ай бұрын

Ordered ! You sold me at "EVERY beginner should have this printer". I've been doing CAD for years and hesitated to take the next step and get myself a nice printer. Now it is done. Can't wait to toy with it, thanks for the review !

@digiscream 10 ай бұрын

I've had my Neptune 4 (non-Pro) for about a week now, and this is probably the best video I've seen on it. That said, I've been printing at a real 250-300mm/s, and I haven't had any of the issues seen here - aside from a bit of ringing, my prints have all come out perfect. In practice, this is just as fast as the Bambu printers, and the only thing it lacks is proper input shaping; the accelerometer headers are present on the controller board and it's obviously present in the firmware, there just...isn't one. In a sub-$300 printer, that's not the worst thing in the world I guess.

@Itsudemo1 10 ай бұрын

It may be close to as fast but it's still a v roller bedslinger. It'll wear down quickly when pushing 200mm/s Core XY is for fast printing

@digiscream 10 ай бұрын

@@Itsudemo1 - when you can buy 2-4 of these for the price of a CoreXY, it's not really a problem...especially when you consider the closed ecosystem and crappy firmware limitations of most CoreXY printers on the market, compared with this one running Klipper.

@Konigstiger 10 ай бұрын

I've got a Neptune 3 downstairs chugging away right now, and this is looking like a hell of an upgrade.

@arthurmint 10 ай бұрын

this is the best shortcircuit i have ever watch. great video dan :)

@MrAlucardDante 10 ай бұрын

Octoprint also has a Bed Mesh Visualizer plugin. But it’s nice that it’s integrated into fluidd

@tswan137 10 ай бұрын

Wow. I’m actually sold. I’ve been waiting to bite the bullet on my first 3D Printer. This doesn’t look like a cheap little toy and I can learn a ton while having actual functional software and features.

@urhomarkkanen 10 ай бұрын

"I hope it's not PTFE lined, otherwise you will die of neurotoxin poisoning" Just a PSA for those who don't know, PTFE, commonly known as Teflon, starts to decompose at temperatures above 260°C, so unless you for certain that your hotend doesn't contain PTFE (for example full-metal hotends, most hotends do have PTFE in them) its not safe to print at temperatures above 260°C

@philipwolper1339 Ай бұрын

Just got this for 150€ on eBay as my first printer. Super hyped to start printing!!

@anmolsinghshekhawat4284 10 ай бұрын

you guys can make an ltt video for getting started with 3d printer for different budget and proficiency level. can also include a bit about 3d print farm business that people are building now a days. I myself want to start 3d printing but not sure which one to get.

@BeefIngot 10 ай бұрын

You want to go to an actual 3d printing channel. You would not benefit from such a video. I promise you.

@DoRC 10 ай бұрын

The small fan is for hot and cooling the two larger fans on the sides are for layer cooling.

@buckminst 10 ай бұрын

Not only did this video sell me on (and cause me to buy) the Neptune 4 Pro, but it introduced me to Klipper, and sent me down the rabbit hole of converting my Ender-3 Pro over to run Klipper off of a spare Raspberry Pi I have. Good job.

@cparks872 10 ай бұрын

I'm a fan of Elegoo, I've had their Neptune 2 for a couple years now. Great budget printers. Probably going to be upgrading to the 4 or 4 Pro here in a few months. Their customer service is top notch as well.

@99prxp 10 ай бұрын

build a voron

@tophatv2902 10 ай бұрын

@@99prxp dont do this just get a bambu for cheaper

@cparks872 10 ай бұрын

@@99prxp Unfortunately I don't have the budget for that. Maybe some day. It does look like a fun project!

@AzuraTheRock 10 ай бұрын

We love Dan

@Jef-F 10 ай бұрын

Dan can review a booger and I'd still watch it.

@DestroyedArkana 10 ай бұрын

I decided to pre-order this as my first 3D printer, thanks for the rundown! I hope it works well for me

@papaplintus 10 ай бұрын

Glad I preordered one earlier this month.

@user-hd8gn1uj7e 10 ай бұрын

i love that dan dailies a tank

@B_T_B 10 ай бұрын

I for one was happy when I got the Neptune 3 Max, then a week later releasing the Neptune 4 series! Hoping they dont release the 4 Max for a while! What I can see from that review of the 4.. Differences are the extra fans on the back of the extruder. Extra light on the extruder. 300°C temp upgrade on that nozzle. Yeah im happy and reckon I can upgrade this max with no problems. 😁

@v3c7r0n 10 ай бұрын

The only two things stopping me from pre-ordering this machine (it is pre-order only at the moment) : 1 - "Remember. No pre-orders" 2 - The question if this is a cherry picked / "golden sample" - This is by no means a shot at Dan or LMG, but I 100% agree with Dan on the question of how the hell it's so cheap

@BeefIngot 10 ай бұрын

you shoudktn because the P1S exists and is far better value.

@kwedl 10 ай бұрын

If anything preview/review models of 3D printers are usually slightly worse or lack some features or final touches of the consumer release. Elegoo and Sovol are great brands, not everything has the be Bambulabs or Prusa expensive to be good.

@kwedl 10 ай бұрын

@@BeefIngot Why are you all over the comments recommendig people Bambulabs, especially as their first printer. 99% of people will never utilize them or require their features. Most people will even be fine with a Kobra Neo or used SV06/Neptune 3. You keep going on about how nobody knows what they are talking about, but you blindly telling people to buy 700+ dollar printers is just stupid.

@BeefIngot 10 ай бұрын

@@kwedl Its not blind at all. I have experience with all spectrums of printers. I say with full context that this is the best option, because I think people value their time, not getting frustrated, not having to tune and calibrate and I've seen way too many people give up or spend all their time with the printer trying to improve it. This printer, you don't do that. It's absolutely a great justification.

@v3c7r0n 10 ай бұрын

@@BeefIngot I'm severely inclined to disagree. First, for the price of a P1S I can buy two of these printers. I am not looking to spend that much at this time. Second, my use case and rationale behind wanting this machine requires zero of the advantages the P1S may or may not have over this machine. Since you don't know my particular use case or rationale, good luck proving otherwise. Third, since, as stated, you know nothing about my intended use of this machine, my experience with 3D printing, or what other machines I may or may not have, your blind (and thus blatantly ignorant) recommendation falls on deaf ears. Fourth, the amount of comments you've dumped trying pumping up the P1S has me thinking that at worst, you are on the Bambu Labs payroll (making you a paid shill) and at best, you're so deep in the fanboy-ism you legitimately cannot comprehend why anyone would ever buy anything else, and both is never off the table. Also, it should be noted that no matter what you may attempt to reply to this with, you cannot prove to me either of those statements are false, not that I'd care if you could.

@SirSicCrusader 10 ай бұрын

I have been keeping a eye out for a recommendation for a starter printer, and I may have just found it thanks Dan, you the man etc.

@Fearox 9 ай бұрын

Crazy to see how far 3D printers have come.. I bought my first 3D printer 2017/18 for 500€ It had NO heated bed (I think it was a 120€ upgrade part) and no leveling assists.

@ZeyadAlmat 10 ай бұрын

Saw this early on Floatplane, watching it again on YT. Videos hosted by Dan are rewatchable af. Funny, informative, and soothing all at the same time.

@tranceonline 10 ай бұрын

Some things he says doesn't sound like he is that much educated in that topic. For example, he says "nice quiet stepper motors" but 90% of the noise of stepper motors comes from their drivers. Meaning, that a really loud printer can get really whisper quiet by just changing the stepper drivers. without touching the motors at all! My first printer was disgustingly loud. Just switching to a "silent-board" made it almost not hearable. Switching to a good 32 Bit board went from quiet to "is it running?" this is just one of multiple examples. I mean, for beginners, its ok. For ppl who are into that for some years... i'd rather watch other YT'ers regarding that topic. still: Love you guys from LTT ;)

@SiniSael 10 ай бұрын

yay Dan video!!! The best of LTT - Luke and Linus is cool and all but Dan is the man!

@Tommy_The_Gun 10 ай бұрын

The printer I am currently using (and it is also my 1st 3D printer) is Creality CR200B - And for the 1st printer it is actually pretty awesome. The only downside I can think of is that bed levelling is not automatic - it is same as here (4 knobs & sheet of paper trick). But again, the price point is similar to the one in the video, but what you get instead of way too fast printing is fully enclosed printer that is pre-assembled & works out of the box. I was even able to print some ABS stuff and it did not failed. And it is not that the printer is slow. My default print speed is set to 60.

@CapacitorCapacity 10 ай бұрын

Dan you should have demo'd screw tilt adjust while you were showing the bed mesh. Also you can klipperize any printer, including yours.

@Dr_Axton 10 ай бұрын

In case you wonder about a axis rods being belt connected-that’s actually a relatively common thing, especially if you upgrade from one rod to two. It’s made in case only one driver makes two steppers move

@kstricl 10 ай бұрын

I JUST bought an Ender 3 V2 Neo in early June. This makes me jealous, but I don't regret my purchase - some of the joy in these units is modifying them. I changed it to direct drive less than a week after purchase using a model from Thingiverse, which I have since modified to add things I wanted. This Elegoo is now on my recommend list for those that want to start without being modification happy.

@nata911 9 ай бұрын

I fuckin love this dudes roll through everything style

@kissmychakram1 10 ай бұрын

I see Dan, I watch the video. I didn't know it was possible to be chaotic dead-pan before he came along. This printer looks very interesting and might just be the one to get me to open my heart and wallet to 3D printing. Thanks.

@xsehrmotiviert 5 ай бұрын

Looks like Linus isn't the only one who can drop stuff

@user-zw3mg1so7o 10 ай бұрын

Love me some 3d printer reviews! Would be cool to see some reviews of resin printers!

@flebnard 10 ай бұрын

Saturns look pretty neat with what can be done with resin

@user-zw3mg1so7o 10 ай бұрын

@@flebnard I do have a Saturn 2 and its a great machine, can recomend! But I am looking to switch to anycubics latest one with autoleveling, since you still need to relevel the build plate from time to time on S2. The ball joint just isnt perfect

@theongothic182 10 ай бұрын

dan is is the second anthony for me, i can listen to this man for hours

@mysticwizard1943 10 ай бұрын

Elegoo makes great stuff. I've got the Neptune 2S and the Mars 2 Pro for resin and they're surprisingly good for their price. Probably gonna pick this one up when I've got some spare cash.

@VoidOperator 10 ай бұрын

I pre ordered this thing on day 1. I'll also be buying whatever printer someone makes that i can start prints from my phone while I'm at work. Bonus points for a Android version of Cura, and a slime block flying machine to push completed print off the bed so i can start the next one

@trailkat1338 10 ай бұрын

Yo I’m so glad you covered this printer! I’m. very into 3d printers and am looking to buy another!

@joeg1992 10 ай бұрын

It's Klipper, you can put that firmware on pretty much any consumer printer out there today. I run it on my Creality printers but it won't run on my FlashForge.

@MrPerfectjake 10 ай бұрын

This looks a great upgrade than the Neptune 3, which i bought as my 1st 3d printer. Just unboxed my Bambu Labs P1P today, which I bought because of Dan's review.

@thecyberquake618 10 ай бұрын

@@monki_sudo where are you finding a p1s for $400? Neptune 4 Pro is going for $300, P1S seems to be $700 most everywhere I can find it

@kwedl 10 ай бұрын

@@monki_sudo For "only" 100 bucks you can buy a bunch of filament rolls though. Most people won't need the P1S enclosure or other small features, if anything since most people just print PLA or PETG you are better off without. Or you can print your own with less money.

@shanematthews1985 10 ай бұрын

@@kwedl yeah the enclosure isn't really required unless you plan to print certain materials, as someone only doing PLA I would have to have the door open anyway if it was enclosed, the P1P is a damn good little printer though

@mirkinzaathnar3167 10 ай бұрын

"that won't break your bank!" Sir, you have not seen my bank account

@anarchangel7 10 ай бұрын

Would love to see more focus on the resin side of printers as well. Elegoo makes some nice ones.

@upcoming 10 ай бұрын

Muchos gracias El Gopher!

@lonesimba 10 ай бұрын

TBH this one looks a lot like a Ender 3 S1 Pro, it has Z motor sync as well, magnetic HB, nice look, print head connects via just single ribbon cable, but spool holder isn't screwed into frame, just clips. And also it doesn't have Type-A port or internet connectivity, but it doesn't feel too bad, i was planning on repurposing my old Galaxy A8+ into a print server anyways

@flammablewater1755 10 ай бұрын

1 hour after this video goes live and we've already hugged the Elegoo site nearly to death.

@moki2093 10 ай бұрын

@@monki_sudo you've made 7 comments on this channel and 6 of them are for shitting on it.

@tophatv2902 10 ай бұрын

@@monki_sudo dude i have seen you like 3 times on yt on diffrent videos. Go outside

@Goodsdogs 10 ай бұрын

I’m buying one. Also Dan looks so happy. It’s great to see!!!!

@shahmeer911 10 ай бұрын

Legit one of the best short cicuit vids

@zeke7515 10 ай бұрын

YESS!!! More 3D Printing content!

@mikekuschka998 10 ай бұрын

Glad Dan is getting away form the help at the Wan Show. Excellent job. Keep up the good work all. That includes you Terren.

@virgiltuser 10 ай бұрын

Nice! Just preordered one 👀

@HartenDylan 7 ай бұрын

Dan getting excited about cool nerdy shit is dopamine-fuel for sure. More please.

@bryanv3loso 10 ай бұрын

Happy y'all run Vorons. ♥

@Brookler 10 ай бұрын

I'm moving in a few months to a bigger place, this is at the top of my shopping list

@NavyDood21 10 ай бұрын

Man, if I wasnt living off of disability, I would love this printer. Used to have an Ender 5, but just didnt have the time to dedicate to it anymore. I was insanely surprised by the price, expected it to be at least twice that amount. I havent been even looking at printer prices for a few years, it amazes me how much they have fallen.

@The9El9Nino9 10 ай бұрын

I was actually hoping you would do this review/showcase.

@AndrewSpeer 10 ай бұрын

Dan's indifference @ 18:55 is why I love his hosting. Just completely unfazed by the utter chaos of it all.

@brokenwing 10 ай бұрын

Dan is a fantastic host. Hope to see him more often! I know nothing about 3D printing, but thanks to Dan's enthusiasm and knowledge, I found myself ready to throw money at the screen when he said the price

@se77ra57 10 ай бұрын

its insane to see how far 3d printers have come these past few years and how low the prices have become

@Wabaloo 10 ай бұрын

Dan has been the best addition to the on screen ltt team.

@dagingerdude 10 ай бұрын

The expletive at the end really has me very interested. It is also nice to see Dan this perturbed about a printer 🙂

@Middle-AgedWhiteGuy 9 ай бұрын

The Klipper FW (and mainsail ui) are open source. I built a printer last year, and have all those features on my UI as well. 400x400x400 cartesian, Octopus board, with 2209 drivers, and an RPI 4B running the interface.