Cessna 150 RC Plane full build DIY

Рет қаралды 145,968

2 жыл бұрын

How to make Cessna 150 RC scale model at home out of XPS foam (Depron). DIY video tutorial (full homemade scratch build & maiden flight).
Specifications, parts list & PDF/SVG/DXF plans: numavig.com/plans/Cessna-150/

Пікірлер: 208

@pabloricardodetarragon2649 2 жыл бұрын

That"s master work First drawing the plans to get the developpable panels, that asks some experience in CAD, second for the very precise cuts, third for forming the panels and gluing it with a very light hand. Wings with true profiles. The beauty and effectiveness of the structure. I'm in awe. Many thanks for sharing.

@RcAircraft 2 жыл бұрын

Very Nice 👍 I especially like the rubber o rings for the motor mount.

@joewynn2445 2 жыл бұрын

This airplane was extremely well built 👏. And the attention to detail was excellent! Good job!

@hekikuu Жыл бұрын

What a lovely plane! Great building technique, clean build and it flies like a fun plane to do touch and goes with all day..

@Gaboon777 Жыл бұрын

Awesome build! My brother bought a 150 a few years ago. This would be an excellent gift idea. Thanks!

@crystalclearwindowcleaning3458 Жыл бұрын

Another outstanding design and build. I'm adding this to my collection of "one of these days" projects.

@k.o.0 2 жыл бұрын

As always a great build! I really liked your approach to inserting the landing gear using the wedge system. I never thought of that, but it’s brilliant and strong!

@bokusimondesu 2 жыл бұрын

Your builds are becoming more and more spectacular!!! Wauw!

@captivenut4122 2 жыл бұрын

It's incredible how you come up with fresh ideas in every video. Masterful work again!

@RC-planes. 2 жыл бұрын

I'm so happy that you built this plane ,it's one of my favorite ,I will downloade the plans ,thankyou very muchhh , you made my day better ,hope you have a great week 🖐️👍♥️

@itslukasfpv 2 жыл бұрын

Damn i subscribed a long time ago and i never get tired of ur vids... best asmr 😅🤤

@oldflyingman7581 2 жыл бұрын

What a talented builder!

@LordMarinade 2 жыл бұрын

Awesome and relaxing build as always. I really admire your skills with blender and manual work. I would love to see more of the Cessna flying on your flights channel. Btw I was recently struggling with bending the wire behind the wheel because it was too short to be bent. I tried putting the shrink tube to stop the wheel from falling but I didn't have CA glue to fix it and it kept falling off so I found out that I can put a bunch of solder on the end of the wire so the wheel remained in place and the tin was very solid.

@user-pw8dn2ov6m 2 жыл бұрын

Спасибо за работу! Уровень достойный повторения!!!!

@MrTinner66 2 жыл бұрын

Gran bel lavoro di progettazione e gran lavoro di costruzione... Proprio un bel modello. Bravo! Grazie per la tua disponibilità.

@franciscoduran3688 Жыл бұрын

I found this trough the slotted flaps part. Great build!

@jimr3633 2 жыл бұрын

It has been such a treat to see how well your design and build skills have progressed. Every video is some new technique. Outstanding! Two requests: 1) Home made wire bender. I struggle to bend wire with pliers and think if anyone can design and build one it's you 2) A unique warbird scaled up about 50% or so from your usual builds?

@massimoborghini9724 2 жыл бұрын

Sei uno spettacolo! Grazie!!

@pascalmuller1258 2 жыл бұрын

Can you please build a Cmelak Z-37. It's one of my favorite classic planes. I have already build your Decathlon and I love it. I wish I had the same building and designing skills as you.

@rcpowres 2 жыл бұрын

No questions!!!! Amazing work

@Yosrd17 2 жыл бұрын

Bravo pour ce travail juste magnifique 👌

@georgepilot2001 2 жыл бұрын

well done sir! that's an aeromodelling art you did there

@sainirchobby 2 жыл бұрын

Absolutely neat and clean as always. i m really impressed with your work of art. ❤️❤️🔥🔥🔥

@flymachine 2 жыл бұрын

Given the price and availability of the impressive CarbonZ C152 I was thinking of making my own too, very nicely done. I actually learned to fly on a C150, very cool airplanes

@gulsmvlogs4170 2 жыл бұрын

Very nice and clean built!

@enriquekramer4590 2 жыл бұрын

A true enjoyment!!! Thank you!!!

@user-il2ne2ze4i 2 жыл бұрын

Молодец, отличные самолёты получаются 👍

@gesseaureliano4629 2 жыл бұрын

Adoro seus aeromodelos

@jonnydiezpaz769 2 жыл бұрын

es increible el nivel de detalle. una obra magnifica de aeromodelismo, tiene que ser ingreible la coleccion que tienes hecha con tus manos y el incremento de detale que has ido teniendo desde que te sigo. un gran saludo y a seguir con ese excelente trabajo

@jorgevillalobos8356 Жыл бұрын

Hola hermano como se hace para llevar el plano a PDF gracias

@demetriusvasconcelos5866 Жыл бұрын

Congratulations. I've been waiting for a long time to see a construction in depron (xps) just like a construction in balsa wood. Thank you very much for sharing your knowledge. The plane turned out beautiful. I'm going to try to make one the same. Good landings.

@zc1971tube 2 жыл бұрын

I've been hypnotized!!!

@henrygutierrezjaimes 2 жыл бұрын

Hermoso trabajo, me anima a hacerlo en casa , saludos

@patrickeloi4125 9 ай бұрын

j'aime le travail que vous faite bravo

@jorgenelsonfelix52 2 жыл бұрын

A very nice model and spectacular work. A big greeting from Buenos Aires. ✈✈👍😎👍✈✈

@peterp.3530 2 жыл бұрын

Perfect as always. Best regards

@yasinakklc9354 2 жыл бұрын

perfect job!

@alexdorn7868 Жыл бұрын

Крутая машинка получилась.

@thierryreymonenq8824 2 жыл бұрын

Merci pour ton partage !!!!

@tonybivers1661 Жыл бұрын

U're a genious !

@ayotaamer 2 жыл бұрын

As always great work 💐❤️🇮🇶

@vovanikotin 2 жыл бұрын

Хотелось бы от вас мотопланер из потолочки увидеть.

@jorgecastellanos1806 Жыл бұрын

Master, genius!!!

@amirhosseinketabi7798 Жыл бұрын

Spectacular ❤😍🤩👌🏻👍🏻

@dableit3936 Жыл бұрын

excelente, saludos desde México

@VOEAERO 2 жыл бұрын

Wow, esse vou fazer!

@jbml3642 2 жыл бұрын

Perfect!

@tboystoys5682 Жыл бұрын

Great job I love the hobby but I haven’t got that kind of patience.

@Heywood-----Jablomeh 2 жыл бұрын

Wow what a talented builder! Do you have a background in aviation engineering? You build these so precise and clean as if they were a manufactured kit.....Excellent work bud!!!

@dangabrielyurango2802 2 жыл бұрын

Awesome build and a gentle flying bird probably one of the more scale looking foam scratch built 150s in KZfaq🤘🤘🤘, and a quick question will there be another twin in the possible future? Maybe a DC3..

@geraldoaugusto8813 2 жыл бұрын

Lindo parabéns

@sondal-7s 2 жыл бұрын

Шикарно! Очень похож на настоящий!

@johnwykoff3256 Жыл бұрын

I would like to make one but a bigger scale like 80inch wing span great job

@djalmagoncalves5190 10 ай бұрын

Parabéns 👏👏👏👏👏👏👏

@kf4293 2 жыл бұрын

Nice build. I wish that blue foam was available around here.

@robato3991 Жыл бұрын

Should be available in most DIY stores. It's a flooring underlay foam originally.

@leve89 2 жыл бұрын

Again awesome build 🙃 For next time P-38 Lightning with everything (removable wings,moving landing gear, ruddler, elevator, flapperons, ailerons and 2 motors). It can be chalange?

@Serega643 Жыл бұрын

Молодец!!!! Супер!!! Лайк!!!

@user-jh2md6fh8f 2 жыл бұрын

hello, I'm your subscriber, I've been watching you for a long time and you are my favorite modeler, who makes models better than everyone and easier than everyone, my request: please make an Aeroprakt a-22ls aircraft. as easy as Cessna, 150. THANK YOU)

@jackcannan9045 2 жыл бұрын

Love the slotted flaps! Anyone know where to get the xps sheets he uses in the U.S? Readi board seems a bit on the rigid side

@messybench974 Жыл бұрын

Nice build! I actually bought the same motor and I used a 8×4 propeller and the motor blow up after few seconds, I manage to land safely, but really sad for the quality of the motor 😔

@ishigamiyu1991 Жыл бұрын

Hello NumaVig! can you also make a STOL style plane?

@alexanderalexander3474 2 жыл бұрын

А можно ещё побольше пилотажек полукопийных?

@AngelCuadrado7 Жыл бұрын

Hola, alguien me puede indicar donde puedo encontrar ese tipo de láminas y tamaño de XPS en españa, por favor? Leroy Merlin no tiene en su catálogo el mismo tipo aquí. Muchas gracias. Excelente trabajo señor Numa.

@Angelum_Band Жыл бұрын

Es polyestireno expandido, cartón pluma le llaman uds? Quizás este enlace te sirva en tu país: kzfaq.info/get/bejne/raeHhpZpvN-2hIE.html

@AngelCuadrado7 Жыл бұрын

@@Angelum_Band gracias por la respuesta. No, en principio el cartón pluma es diferente, a lo que yo me refiero es a poliestireno extruido, q se usa para aislar suelos de madera, por ejemplo.

@Angelum_Band Жыл бұрын

@@AngelCuadrado7 Te averiguo con mis conexiones Españolas.

@natewillis8780 2 жыл бұрын

what up dude i love your videos and i think you should probably try making the P38 or even the infamous and iconic B17 with a 2 1/2 FT wing span

@manxman6165 2 жыл бұрын

Go and see Flite Test and a 20 ft B17

@natewillis8780 2 жыл бұрын

@@manxman6165 i already did that and it was super cool and I think this guy should make an exact replica of it but at a much smaller scale like a 21/2 wing span

@sightandscenealloverthewor4121 2 жыл бұрын

Brother .. You are genius .. Could you build F16 we need the template and your skill

@il88ka 2 жыл бұрын

Очень круто!

@almosh3271 Жыл бұрын

Excelent workman ship. What is the glue you are using?

@wladimirvelososoaresjunior497 Ай бұрын

Cara topi demais, ensinando aí quase passe a passe, fazer seu próprio aeromodelo 😂

@willasproth 2 жыл бұрын

Dope

@ivanmaslov8084 2 жыл бұрын

наконец-то кто-то сделал цессну-150 действительно цессной-150)

@UpVoltageOverclocking Жыл бұрын

The outter skin of the fuse would have a cleaner finish if the seam was on the bottom rather than the top

@TwoBricks2345 5 ай бұрын

Its not fair you make it look so easy😣

@stevendegiorgio3143 11 ай бұрын

A lot of work went into building that plane It looks really nice.Its not much different than building a balsa plane

@ambrozywajcha1262 Жыл бұрын

Witam serdecznie Pana uwielbiam pańskie filmiki z budowy modeli rc czy byłaby możliwość zrobienia modelu typu sky surfer chętnie bym się pod uczył budowy szybowca

@henriquerezendeesteves2908 Жыл бұрын

muito maneiro

@mohamedrashidcassam3034 2 жыл бұрын

Sadly couldnt download the free plans.I would love to build this plane as i love the model.

@xtofduurr 2 жыл бұрын

the PDF plan will be available in a few days. Meanwhile you can print the JPG plan. numavig.com/plans/Cessna-150/img/Cessna-150-RC-plans.jpg

@MegaSuperJaBaTo 2 жыл бұрын

Would love to see this plane in BLUE and YELLOW. I thought that OBI is closed in Russia ...

Ай бұрын

Did you considered make tutorial how to design plane in CAD and then build? Whole process?

@kapten_baron 2 жыл бұрын

Awe👍👍

@martin.k240 2 жыл бұрын

Hey I was wondering if you keep you planes and if so how much do you have in total?

@vinayakvinayak143 Жыл бұрын

Best thing about ur plane It s light weight so lesser wing loading

@FabiodeMoraes84 2 жыл бұрын

👏👏👏

@marcorinaldi2196 Жыл бұрын

E molto bello l'hai disegnato con blinder 3D?

@jqmachgunner2577 Жыл бұрын

In your opinion, what is the best buy in RC controllers?

@user-gf9mt1il6y 2 жыл бұрын

Классный самолёт! Не подскажите, а мотор 2208 можно поставить и аккумулятор 3s?

@NumaVIG 2 жыл бұрын

у меня нет моторов 2208

@T.W.I.T. Жыл бұрын

very nice, can you please tell me what glue you are using, and what is that coloured tape you are using to cover the plane..

@NumaVIG Жыл бұрын

www.google.com/search?q=glue+for+polystyrene www.google.com/search?q=colored+tape How many times do I have to show the glue bottle logo in a video to stop being asked this question?

@T.W.I.T. Жыл бұрын

@@NumaVIGthanks for that.. I am new to this.. you only see the brand name not the type of glue.. your thumb covers most of the bottle and it is a brief look.. if it was listed in your plan materials then maybe you wont get asked so often.. I looked through a few of the comments to see if anyone else asked the same question before I asked you.. I didn't see anyone else asking about the glue..

@user-js3jq3fo9d 2 жыл бұрын

can you make a DLG glider?

@AlexanderBessalov Жыл бұрын

а что то из моделей с полетным контроллером так чтобы АЙНАВ туда залить GPS поставить делали ? Я только квадрики делал

@adcdsasa6526 Жыл бұрын

Hi master what program you use for desagne the pices tkx great job

@martincakov7061 2 жыл бұрын

№1

@flymachine 2 жыл бұрын

Could I ask you to share a link for the underlay material you use, it’s not easily available in South Africa but I bet I can ship a container in

@NumaVIG 2 жыл бұрын

this was bought 2 years ago, is not available now www.google.com/search?as_q=XPS&as_epq=&as_oq=&as_eq=&as_nlo=&as_nhi=&lr=&cr=&as_qdr=all&as_sitesearch=rcgroups.com&as_occt=any&safe=images&as_filetype=&tbs=