Nux Mg 300 Expression Pedal Demo

Nux Mg 300 Expression Pedal Demo | Secret Tones Here!

Рет қаралды 90,493

Күн бұрын

In this video I show you everything you need to know about the Nux Mg 300 Expression Pedal. This is one of the most powerful features of the MG-300 as it goes far beyond just working as a standard Wah and Volume Expression Pedal. This pedal can be assigned to nearly any module within a preset. You can assign it to the Level of the Amp, the Mix of the Delay or Reverb, the Pitch parameter of the Harmonizer. And you can do this without a computer. It really turns the MG-300 into a pro piece of gear.
0:00 Intro
0:34 Calibration
1:41 Default Mode
2:29 Assign to Amp
3:42 Assign to Delay
4:38 Assign to Reverb
5:28 Assign to OD
8:10 Assign to Pitch
8:58 Conclusion
#thepedalguy #dontgetpedalbored #nuxef
Facebook: bit.ly/30uRrnS
Instagram: bit.ly/3f97KuD
Twitter: bit.ly/3fcRTeo

Пікірлер: 160

@MusiciansReflib 2 жыл бұрын

Such a helpful video. I really like that you go into extreme detail, talk slow and clear about everything you are doing, and not assuming I already know a bunch of things. Thanks!!

@ThePedalGuy 2 жыл бұрын

Glad it was helpful!

@howgreatisourgodgreatminds3032 3 жыл бұрын

I just received my NUX MG300 today. Thanks for the update and all your tutorials

@ThePedalGuy 3 жыл бұрын

Glad you like them!

@kyleblaneplays 3 жыл бұрын

Literally waiting on my MG-300 to arrive today and I see this pop up in my feed. I got it based on yours and other videos, everyone just seems to really enjoy playing around with it.

@ThePedalGuy 3 жыл бұрын

Glad to hear. Enjoy the mg300

@hanovergreen4091 3 жыл бұрын

Backordered MG-30 ship date pushing out again, I should have purchased one of these. How did it work out for you and Best Regards

@user-jd6rd8cq7k 2 жыл бұрын

@@ThePedalGuy Hello! Is it have auto-wah? Can I use it in pedal-board without simulations of amp and cabsim?

@ThePedalGuy 2 жыл бұрын

@@user-jd6rd8cq7k I don't recall an auto wah. Yes you can turn off the amp and cab sim if you want to use it on a pedalboard.

@user-jd6rd8cq7k 2 жыл бұрын

@@ThePedalGuy Okay, thank you very much!

@Abenjohar22 2 жыл бұрын

Excellent demo keep it up

@ThePedalGuy 2 жыл бұрын

Thanks

@radias2922 2 жыл бұрын

ohhhh man, this is awesome. thanks!!!!

@ThePedalGuy 2 жыл бұрын

Sure thing!

@TezTezTezTezTez 7 ай бұрын

Pitch bender with the pedal sounded fun 😃

@farleytrading Жыл бұрын

thank you,very helpful video!

@ThePedalGuy Жыл бұрын

You’re welcome

@mr.dizzzm7385 Жыл бұрын

very helpful, thank you 🙏🙂

@ThePedalGuy Жыл бұрын

Thanks

@pierrevivies3158 Жыл бұрын

Thank you ! Whitout your explainations it was impossible for me to activate le pedal as wah! Thanks a lot

@ThePedalGuy Жыл бұрын

Happy to help

@dr.hesoyam48 3 жыл бұрын

u r the best, thanks for good instruction

@ThePedalGuy 3 жыл бұрын

Thanks.

@Fernando.Canal2 3 жыл бұрын

This is awesome

@ThePedalGuy 3 жыл бұрын

Thanks 🙏

@brownadebola5244 4 ай бұрын

Well explanatory🎉🎉❤

@ThePedalGuy 4 ай бұрын

Thanks

@nadhilafiq Жыл бұрын

tq . finally i find solution to active the pedal..

@ThePedalGuy Жыл бұрын

Cool

@OD138 3 жыл бұрын

Can you set the pitch bender to just tune down a half step or full step? When I'm learning songs that are tuned down I want something quick so I don't have to tune my guitar.

@ThunderFalcon333 3 жыл бұрын

I got this Saturday for the hell of it.i gotta say I like it and it's a fun pedal for $149.

@ThePedalGuy 3 жыл бұрын

You bet it is. Watch all of my vids and you’ll find a whole bunch of things to do

@ThunderFalcon333 3 жыл бұрын

@@ThePedalGuy I'll check out ur videos 👍

@hargisP2 3 жыл бұрын

Thanks

@ThePedalGuy 2 жыл бұрын

No problem

@stanissuban Жыл бұрын

thnk you om

@ThePedalGuy Жыл бұрын

You’re welcome

@asirex 3 жыл бұрын

Can the pitch shifter be used as a different tuning (I mean without tuning the guitar to that tuning)

@Searchingforsilver777 3 жыл бұрын

I was happy with the MG 300 before but seeing this video makes me want to experiment more and more. I also have a BOSS ME-80 which is real fun to play with. The only problem is I also have the Katana MK II 100w head w/ 5 " speaker and home made cabinet with two 12' jbls =, two 4.5" All arounds. And two 4 " piezo tweeters. SO my amp pretty much does many of the things the effects pedals can do, however they will both work compatible with the amp at two different levels in the effects chain. Got a lot to play with.

@ThePedalGuy 3 жыл бұрын

Looks like you’re heading in the right direction

@irenabosworth9707 Жыл бұрын

Can I set the Min to half volume and the Max to full volume? I want to boost the volume on guitar solos without using gain

@joedesouza6686 3 жыл бұрын

Very useful info. Thanks! Most Multi effects units plugged into the front of an Amp don't sound good. But they sound great if you use an FRFR Amp/powered speaker. Where does the MG 300 stand?

@ThePedalGuy 3 жыл бұрын

Thanks. The MG-300 sounds good either way. Here’s a vid that demos this kzfaq.info/get/bejne/mMeVbJmorZyviac.html

@joedesouza6686 3 жыл бұрын

@@ThePedalGuy Thanks Scott. I just watched the link. Very useful and amazing feature.

@gunslingersymphony5015 Ай бұрын

I only recently got my MG-300, and on mine, after holding edit/exit and save, then using the group module buttons to navigate to the pedal option, I have to press save to get to the calibration, and edit/exit just exits them menu. I don't know yet if this is the same for other menu options.

@kholileo821 2 жыл бұрын

I bought mg300 today . And I'm trying to activate the wah pedal, but I'm not done yet. I pushed it slightly hard, but nothings happen. How hard should I push it? I'm just afraid it will broke the pedal..

@RockatHome 3 жыл бұрын

Please make a pitch shifter preset like tom Morello with this nux mg 300🙏

@ThePedalGuy 3 жыл бұрын

It does have a whammy already but not with enough range a la Morello. I’m sure they have this on their list to improve.

@RockatHome 3 жыл бұрын

@@ThePedalGuy I bet you can make an almost certain Tom morelo sound with this effect.👍

@prince_peter_immanuel 3 жыл бұрын

Zoom G1 four X or nux MG 300? Which one is best in worship patch and more cooler tone Thank you

@musik4life24 3 жыл бұрын

Hello nice Videos i subd;). Torn between 2 multieffect units One Question: What about nux mg300 compare to the boss gt1??? Tone wise and quality of the effects? A good Rectifier would be nice!

@ThePedalGuy 3 жыл бұрын

Thanks for the sub! Haven't used the GT1 so I couldn't tell you. The MG-300 has a Dual Rec included already, but I found that I liked the Diezel emulation even better

@martinchocoo 6 ай бұрын

hii, great video, tho I cant seem to turn on the wah on no matter how hard i push down, i´ve previously updated its firmware if that helps.

@accentontheoff Жыл бұрын

So the parameter to which I can assign the pedal within each effect is predetermined? Or can I configure that. Thanks.

@muan_tea 3 ай бұрын

Can this be directly connected to a phone as an audio interface, im currently using the mg 30 and i can directly connect to my phone and use it as in interface using a cable adapter. I wonder if that can be done with this? Please help🙏

@sinistrality7883 Жыл бұрын

How far is the reach of the pitch bender? a full octave? double octaves?

@shoter9696 2 жыл бұрын

Hi! pedal guy, love your videos. I got a question. My volume/wah pedal is not working correctly, when I change presets it suddenly volume goes down a lot or activates the wah from nowhere. I hope you can help me with that. Any way, thank you for your videos! Saludos from México.

@ThePedalGuy 2 жыл бұрын

Sorry for my late reply. Have you calibrated the exp pedal?

@paulhansen8566 Жыл бұрын

Great video! I just got mine today and I calibrated the expression pedal, but I'm having a problem. I pick the string or play a chord their's a half second delay with the sound coming out. I don't have the delay on at all and it sounds that way on every preset I try. Is their a way I can fix that or is the unit bad?

@ThePedalGuy Жыл бұрын

That’s odd. If you would post a video demonstrating the issue on our MG300 FB group we can help

@eloy4672 4 ай бұрын

is the exp pedal dual function? If you turn it off it function as a volume pedal?

@maumontag Жыл бұрын

How is the wah wah kept active? because when I press the BYPASS to change the Presets the WHA WHA turns off

@ubw8754 3 жыл бұрын

I have a question. Is it possible to assign exp pedal to more detailed parameters? I mean, Can I assign exp pedal to a [gain control] knob of AMP section? or Can I assign exp pedal to some specific parameters in EQ? And is it possible to assign exp pedal to several parameters at once in one preset?

@sinistrality7883 Жыл бұрын

I have this pedal, and the answer is no, the exp pedal can only be mapped on the volume of said parameters, basically "how loud do you want Modulation to be" etc, it's not that detailed tbh and no, there's no parameter for the EQ, and no you can only map one parameter in a preset.

@elemkay5104 3 жыл бұрын

Hey cool vid. I noticed that when you used the whammy, pushing the expression pedal all the way down didn't result in a whole octave drop - it was slightly off. Is that something that is consistent whenever you use it? I've seen a few people talk about issues with the pedal working 100% correctly, so just doing some research before I take the plunge and get one.

@ThePedalGuy 3 жыл бұрын

Thanks. That probably had more to do with not calibrating the pedal properly to my hand strength.

@moon-ln2ci 2 жыл бұрын

@@ThePedalGuy i seen reviews about the mooer 200 and the wah there was amazing I really wonder how is it on nux Are there few options there?

@martindamasin8669 3 жыл бұрын

Would the exp pedal set to the od sound good for a solo boost?

@ThePedalGuy 3 жыл бұрын

When it comes to the EFX block, the Exp pedal Controls GAIN (DRIVE) parameter of OD/DIST. Or controls PITCH parameter of PITCH BENDER.

@jesusamayaguitarra77 2 жыл бұрын

funciona el pedal de expresión en el parámetro de modulación también ???? muy interesante tu vídeo !!!

@ANONYMOUS-sg6qh Жыл бұрын

si entiendes ingles mínimo preguntale en ingles 🙄

@muhammadrakanyusra1430 3 жыл бұрын

can you use it like a stomp? instantly turn off/on the distortion or any other fx?

@ThePedalGuy 3 жыл бұрын

Hi. Unfortunately, no not at this point. It might be addressed in a future firmware update, but I would bet that it will be found on the upcoming MG-30 when that arrives.

@d3strac00l Жыл бұрын

Terimakasih pak saya berhasil

@ThePedalGuy Жыл бұрын

Glad to hear it

@tiago5a 3 жыл бұрын

Is it possible to create a freezer effect with a reverb and the expression pedal? Thanks

@ThePedalGuy 3 жыл бұрын

Not that I’m aware of

@Funkfreed 2 жыл бұрын

Would you rather have the TSAC tone & menu simplicity of NUX MG300 or the stomp mode of Valeton GP 100?

@ThePedalGuy 2 жыл бұрын

Haven’t used the valeton so I couldn’t give you an objective opinion.

@candyman5429 3 жыл бұрын

I wish there is a sustainiac pedal on mg300🙏🙏🙏 it must be fun...

@ThePedalGuy 3 жыл бұрын

Maybe one day

@-BY205 2 жыл бұрын

Could you do a tone of zz top please 🙏 on the mg 300 nux. 🙏

@ThePedalGuy 2 жыл бұрын

Thanks for the suggestion. I'll consider it.

@sinistrality7883 Жыл бұрын

Can you use the expression pedal to do ambient volume swells?

@ThePedalGuy Жыл бұрын

Sure. You should be able to do that just fine.

@sinistrality7883 Жыл бұрын

@@ThePedalGuy nah im sorry, I'm mainly asking this since most expression pedals that controls volume, only control the volume of the amp and not the guitar, so when you put heavy reverb and delay on it, and try to do volume swells the trails of the reverb and delay aren't left off.

@estebandavilanaveda7114 2 жыл бұрын

Does the Whammy included in Mg-300 has a 2 octaves mode?

@ThePedalGuy 2 жыл бұрын

I believe it's only one octave at the moment.

@estebandavilanaveda7114 2 жыл бұрын

@@ThePedalGuy oh ok :(, thank you

@elordemedina9474 Жыл бұрын

🥰🥰🥰

@ThePedalGuy Жыл бұрын

Thanks

@jhonelguerrero7218 2 жыл бұрын

Can do pre select? While switch on other patches?

@ThePedalGuy 2 жыл бұрын

Not sure I understand.

@RobinhoGuitarCovers Жыл бұрын

How many octaves does the pitch bender have? Looking for 2 octaves up for the Tom Morello whammy

@KevinTPLim 8 ай бұрын

If you figure this out *please* share!

@RobinhoGuitarCovers 8 ай бұрын

@@KevinTPLim i think at this moment it's just 1 octave up

@ridzuanmohamad4491 2 жыл бұрын

Hi .. I cannot into calibrate screen. Do we need to upgrade the firmware? I just received mg300 today. Tq

@ThePedalGuy 2 жыл бұрын

You don't need to upgrade the firmware to get into the calibrate screen. I did a video on this very subject. Check my MG300 playlist.

@berryoaks3061 3 жыл бұрын

Hi, can you also make a demo of how to calibrate the expression pedal of the MG-30. you can't find anything about this in the manual. You can't actually call it a manual, it contains almost nothing Thank you in advance.

@imthebatking 3 жыл бұрын

On the Nux website there's a manual with expression pedal instructions and also a firmware update to fix some issues people were having.

@berryoaks3061 3 жыл бұрын

@@imthebatking Thanks!

@ThePedalGuy 3 жыл бұрын

I've shown how to do this on a few of the MG-300 vids.

@steelydan1242 3 жыл бұрын

Can you do this for MG100?

@ThePedalGuy 3 жыл бұрын

Eventually I might be able to do something for the MG100

@howechern Жыл бұрын

Hi, very useful video but I'm semi-regretting purchasing this because I read that the 2 on-board foot switches can't be use to store preset effects? So it can't really be used in a jam session where I might want to have distortion on one foot switch and chorus on another? Is that correct?

@ThePedalGuy Жыл бұрын

That’s correct. If that’s what you’re after you might give the mg400 or mg30 a look

@abrod6098 2 жыл бұрын

0.46 I can’t do that it I’ve pressed it but it just show the pedals that come from the presets please I need to know what I have to do.

@abrod6098 2 жыл бұрын

0:46

@ThePedalGuy 2 жыл бұрын

Really not sure what you're asking here. You can't calibrate it?

@gitarhane Жыл бұрын

I am pressing pretty hard to activate the pedal but it doesnt work here. Should i press harder or something?

@ThePedalGuy Жыл бұрын

The on/off on the expression pedal is pressure sensitive so you do need to press down with your foot and it should feel fine. Takes a bit more work with your hands but if you are still having issues try calibrating it

@gitarhane Жыл бұрын

@@ThePedalGuy i handled it thx for answer

@spartanunyil6772 2 жыл бұрын

updet for new software nux MG 300 2021 🙏🏻

@ThePedalGuy 2 жыл бұрын

There was a new firmware released recently. Did you grab it?

@stormdami Жыл бұрын

ok what if I am not going to record anything at the moment. Considering I have no DAW. Can I simply plug nux somehow to my PC and hear the sound of what I play? Looking for some trick that allows me to enjoy full nux simulations (amps,cabs,,efxs etc) but bypassing my combo and not buying frfr..

@ThePedalGuy Жыл бұрын

I don't understand the question. You don't need to use a computer at all to enjoy the sounds of the MG-300. Just connect your guitar and use a pair of headphone.

@stormdami Жыл бұрын

@@ThePedalGuy Neither I want to use my combo nor headphones. I want to enjoy amp,efx and cabs from Nux. So I wonder if I can plug Nux to my pc somehow to pc sound card so I could hear what I play through pc active speakers.

@stormdami Жыл бұрын

I am afraid that connecting Nux into combo front I would be missing either Nux amps or Nux cabs simulation functionality..

@ThePedalGuy Жыл бұрын

@@stormdami OK, I think I understand. Well, the MG-300 is an audio IO so you can plug it in via USB and use it with your PC

@stormdami Жыл бұрын

@@ThePedalGuy thx!

@alexandre8014 3 жыл бұрын

Ola to tendo problema com minha mg300 nao reconhece o dispositivo no update o que posso fazer estou usando o windows 10

@ThePedalGuy 3 жыл бұрын

If you would please ask your question in English I'll try to help.😀

@tamila_keek7628 2 жыл бұрын

Dovnload cyi ton

@pauloing1pauloing167 Жыл бұрын

00:32 click here to start the video.

@mimicr3y39 2 жыл бұрын

Hey there! is anyone else here experiencing some sort of warble or glitch sound with their pitch shifter? thanks

@ThePedalGuy 2 жыл бұрын

Well, it's a whammy and they are known for that type of digital artifact.

@mimicr3y39 2 жыл бұрын

@@ThePedalGuy oh so like when i try to play like a triad it just doesnt work with this pitch shifter? I can only play one note without i being a warbly mess that turns into a diff pitch

@ThePedalGuy 2 жыл бұрын

@@mimicr3y39 yep. Single notes are going to sound better

@Vince1974 3 жыл бұрын

Hi, My expression pedal only works with the wha or as a volume. When set on delay or mod... still a volume controller. Any idea ? Best regards

@ThePedalGuy 3 жыл бұрын

Hi. Couple of questions. 1. Did you calibrate the pedal. 2. Are you using the latest firmware? 3. When you have the pedal assigned to anything other than Wah is the "Pedal" light on?

@Vince1974 3 жыл бұрын

In case it helps I found out : You need to activate the expression on/off the pedal by pressing it on toe area :)

@Vince1974 3 жыл бұрын

@@ThePedalGuy the pedal was not lit on ;) Thanks !

@ThePedalGuy 3 жыл бұрын

@@Vince1974 Figured that's what it was.

@Vince1974 3 жыл бұрын

@@ThePedalGuy by the way, the 4 first presets 1A-D don’t have a mic in front of the cab, do you know why ?

@markblack5015 2 жыл бұрын

For me, this Pedal button does not work, I press it strongly and it does not illuminate after calibration

@ThePedalGuy 2 жыл бұрын

I would contact NuX to see if they can help.

@markblack5015 2 жыл бұрын

@@ThePedalGuy I have already dealt with this problem. the cable that connects to the PC was to blame. I connected the cable to charging the phone instead of connecting and transferring files and data. Everything works as it should.

@user-lb6md9ms2u 11 ай бұрын

Once I press the edit button it takes me back to the home page instead of the calibration menu😢

@hifijohn 11 ай бұрын

You have to press the save not the edit/exit button.

@user-lb6md9ms2u 11 ай бұрын

@@hifijohn thanks

@moon-ln2ci 2 жыл бұрын

I'm confused about those multi effects A dilemma between mooer ge 150 200 Or this 1

@ThePedalGuy 2 жыл бұрын

Well, I’m biased so I would say NuX

@moon-ln2ci 2 жыл бұрын

@@ThePedalGuy i had nux 200 no pedal i don't know how to use those things so good. Switch between effects like when you have normal effects Do you have few wah wah options in the pedal? Or just basic?

@ThePedalGuy 2 жыл бұрын

@@moon-ln2ci yes it has a Wah

@moon-ln2ci 2 жыл бұрын

@@ThePedalGuy i know it had my question us can you play with it different options. Or just basic wah

@hitmakerstudio6405 2 жыл бұрын

my pedal button wont get red

@ThePedalGuy 2 жыл бұрын

Have you calibrated the pedal?

@hitmakerstudio6405 2 жыл бұрын

@@ThePedalGuy yes it works now thanks! The problem was The pressure function to activate the pedal was not clear! Now I love this little Box...

@ThePedalGuy 2 жыл бұрын

@@hitmakerstudio6405 great!

@Godspeed961 6 ай бұрын

i push the pedal button but doesnt become red.

@Godspeed961 6 ай бұрын

ok i doesnt put enought the expression pedal to turned on. i think i will broke it on my table lol.

@ThePedalGuy 6 ай бұрын

@Antonio-xk6yk 7 ай бұрын

Without upgrade this multieffect are very sucks

@ThePedalGuy 7 ай бұрын

There have been upgrades. Maybe give that a try instead of negative comments that mislead

@asirex 3 жыл бұрын

Can you set the pitch bender to just tune down a half step or full step? When I'm learning songs that are tuned down I want something quick so I don't have to tune my guitar.

@KevinTPLim 8 ай бұрын

Great idea! Did you find a way to make this work?

@asirex 8 ай бұрын

@@KevinTPLim kind of, I just gradually pitched it down until it was a half step, but there's no option to do it faster. I would recommend to save the preset so that you don't have to do it everytime