Nux Mg 300 Update | NEW FIRMWARE JANUARY 2021
Рет қаралды 21,727
Күн бұрынNux Mg 300 Update. NuX just released a brand new firmware this month. While there aren't any new effects or amps, there are some outstanding workflow improvements that I think you'll really dig. In this video, I'll take you through the installation process and review each new feature. Enjoy!
0:00 Intro
0:43 Backup
1:24 Installation
2:31 Master Volume Lock
3:49 Engage Blocks
4:30 Set Global Mode
5:53 Default Preset
6:47 Quick Exit
7:04 Preset Location
7:39 Conclusion
#thepedalguy #dontgetpedalbored
Facebook: bit.ly/30uRrnS
Instagram: bit.ly/3f97KuD
Twitter: bit.ly/3fcRTeo
@AmritP 2 жыл бұрын
OMG had another watch of this and picked up a super useful tip. thanks so much for informing about the master volume lock. whilst i'm not saving the volume lock, it's super useful that i can save the bootup master volume. as i'm connecting to my combo amps 'aux' port, normally the pedal would boot up at 50% volume and blow my ears off but with the master volume i can save it atleast so the bootup volume is more along lines of what i can tolerate, and i have less reliance on having to remember with my foot pedal on 0. awesome!
@ThePedalGuy 2 жыл бұрын
Glad to help
@firdeye2681 3 жыл бұрын
this thing is so cool, buying one asap! thank you for the informative video, liked.
@ThePedalGuy 3 жыл бұрын
Cool. I have them in stock if you’d like to pick one up
@jurgeoribe9907 3 жыл бұрын
Great video as usual, very helpful
@ThePedalGuy 3 жыл бұрын
Glad to hear it!
@robertorocatagliatta2028 2 жыл бұрын
Great Job !!!
@ThePedalGuy 2 жыл бұрын
Thanks
@stjohns0 3 жыл бұрын
Hia Scott. So I switched the MODE to COMBO FRONT and then went into setting 1A, expecting to see the AMP block "bypassed", but it was still in the chain. I thought that FRONT setting would allow me to hear my own combo amp as God intended ;-) with just the stomp boxes in the chain.
@NDAYOfficial 2 жыл бұрын
Tqvm......its very helpful.........
@ThePedalGuy 2 жыл бұрын
Thanks
@ozzyozz3040 3 жыл бұрын
Nice new feature. --> in the left upper corner you can change the size of the Window from the Editor in percent.
@ThePedalGuy 3 жыл бұрын
Excellent
@RADERFPV 3 жыл бұрын
Is this on the unit itself, or is this something on the desktop app? I have poor vision, so I'm always interested in being able to change text/window sizes. I just ordered, can't wait to get it! Thank you.
@anthonypeterjackson1588 3 жыл бұрын
Hi Scott, you didn’t mention about re calibrating the volume/ wah pedal when you re install the presets..
@ThePedalGuy 3 жыл бұрын
Good point. Sorry I forgot to mention that.
@leesbassment6393 3 жыл бұрын
Nice!
@ThePedalGuy 3 жыл бұрын
Thanks.
@gabsguitarvlog 8 ай бұрын
Hey Scott! how do you switch between user preset and factory preset without using the quick note editor?
@DankradMP 3 жыл бұрын
Thanks :)
@ThePedalGuy 3 жыл бұрын
Welcome!
@ozzyozz3040 3 жыл бұрын
Have you see, there is an new Quick Tone Editor to.
@ThePedalGuy 3 жыл бұрын
I did. Totally forgot mention that
@MrShmikeuk 3 жыл бұрын
Is there any way to turn a selected effect on or off with the foot switch like you would a normal pedal. I find im jamming along and quickly want to tap off the drive or a delay and can't...
@steveallsopp8385 2 жыл бұрын
It seems the best way to do something like what you want (since you can't simply turn on and off a specific effect in the chain block with the footswitch in a given preset) is to copy the preset patch you're using and adjust or eliminate the effect that you want altered/removed, then save the altered effect patch in the location right next to the unaltered effected patch in use. That way all you have to do is hit the footswitch to move to the next patch/preset that has the effect off and back again to the previous patch/preset to turn it back on.
@rkpragyajitsingh3074 3 жыл бұрын
Does this thing have an envelope filter?
@21stcenturymetal31 3 жыл бұрын
Cool I might need to hook it back up again. lol
@ThePedalGuy 3 жыл бұрын
Yes indeed
@KennethFernandez 2 жыл бұрын
hi, just brought it yesterday, im using it as an audio interface, all settings are done in my DAW, I can record actually, but when i want to hear the playback, I cant hear anything. even my backingtracks. my output came from the output/headphone of the NUX MG300. Did I missed somthing?
@ThePedalGuy 2 жыл бұрын
Hi. I’m sure it’s something simple. Need more info though. What daw? Which platform. Etc
@KennethFernandez 2 жыл бұрын
@@ThePedalGuy im using Mixcraft 8 sir.
@JCILORD 2 жыл бұрын
Wow. nice video. Could I use the MG300 as just a pedal for recording in a DAW like Logic or Cubase? I would like to re-amp with the Guitar rig (Plug-in) also.
@ThePedalGuy 2 жыл бұрын
Yes, absolutely
@JCILORD 2 жыл бұрын
@@ThePedalGuy Thanks for a reply.
@andrescs8947 3 жыл бұрын
can u help me? , my nux mg300 not finished the update, i closed the software when show the message but in my nux's display, keep updating and not shows succeced.
@ThePedalGuy 3 жыл бұрын
I would suggest trying to reinstall again but this time wait for the mg300 to complete the update. It takes a few seconds to complete after the application finishes.
@jcd13able 3 жыл бұрын
Can you move the effect blocks in the chain without using the editor, ie. on the unit itself?
@ThePedalGuy 3 жыл бұрын
Yes. There’s an option on blocks that allow this
@jcd13able 3 жыл бұрын
@@ThePedalGuy Nice. Thank you.
@odenirandavid6620 Жыл бұрын
Please did i need to i install the software on my PC first before updating my MG300.
@ThePedalGuy Жыл бұрын
Yes. Install the editor and back up your presets
@sunnytaufiq07 2 жыл бұрын
Hi. I am about to buy this MG300. Do i need to install the new firmware first or I connect it to my PC to set the install patch?
@ThePedalGuy 2 жыл бұрын
Install the firmware
@ziffra506 3 жыл бұрын
i got a muted sound after the update. when in tuner, it sounded when i press the loop switch. can you help me with this issue? bought here in China.
@ThePedalGuy 3 жыл бұрын
I would suggest doing a reset on the pedal, recalibrate the exp pedal and if all else fails reach out to NuX.
@ziffra506 3 жыл бұрын
@@ThePedalGuy works well now.. thank you
@tomcaron9113 3 жыл бұрын
Hey Pedal Guy! 1A User is my first of 10 of performance patches. Problem is if I accidentally hit the left button, I am into 9D Factory and have to go through all of the Factory patches with the dial to get back to User, not to mention 9D is so loud it disrupts the show, Any ideas? I would like to disable all Factory patches when I’m playing live.
@ThePedalGuy 3 жыл бұрын
Hi Tom. Sounds like you got this question answered in the MG-300 FB Group.
@tomcaron9113 3 жыл бұрын
@@ThePedalGuy Yeah, it’s a work around but that’s ok. It’s a great sounding pedal at any cost. Wish the wah eq was adjustable though.
@ThePedalGuy 3 жыл бұрын
@@tomcaron9113 ya never know. Maybe they will put that in an update at some point.
@tomcaron9113 3 жыл бұрын
Would be nice if the MG30 has that option.
@prince_peter_immanuel 3 жыл бұрын
Please tell me which is best for beginners nux mg 300 or zoom g1x4 ? And which one has more cooler tone in worship patch? Thank you
@ThePedalGuy 3 жыл бұрын
Haven't used the Zoom so I can't offer an objective opinion here. However, I love the tones from the MG-300. It's a great solution for under $150
@prince_peter_immanuel 3 жыл бұрын
@@ThePedalGuy thank you for the opinion Cheers bro 🙌
@ShaWar102 2 жыл бұрын
My quick tone editor doesnt see my mg300. I just get the NUX screen. Its been updated. Anyone known whats wrong? Thanks.
@ThePedalGuy 2 жыл бұрын
Make sure you're using a USB data cable. Not a charging cable.
@ShaWar102 2 жыл бұрын
@@ThePedalGuy how do you know the difference between the two? I've tried every Cable in my house
@melipongamri6626 3 жыл бұрын
Hey brother....what r the new amp ,dist,drive,modtn etc
@ThePedalGuy 3 жыл бұрын
Don’t quite understand your question
@Chip_57 3 жыл бұрын
Wonder if you can help. Heard that the MG300 wont record the drum and loop via USB? Is this correct?
@ThePedalGuy 3 жыл бұрын
Hi. As far as I'm aware, it does not transfer the loop and drum via USB.
@Chip_57 3 жыл бұрын
@@ThePedalGuy Ok thnx. Do you know how to work round this?
@ThePedalGuy 3 жыл бұрын
@@Chip_57 Record it in as an analog signal. Take the main output of the MG-300 and send it to an audio IO that's connected to your computer.
@Chip_57 3 жыл бұрын
@@ThePedalGuy I guessed so. Thnx for your help. 👍
@ThePedalGuy 3 жыл бұрын
@@Chip_57 Sure thing
@stephenhunt572 4 ай бұрын
Is there away to update to firmware on android or is it only available for mac and windows
@ThePedalGuy 4 ай бұрын
Only Mac and windows
@stephenhunt572 4 ай бұрын
@@ThePedalGuy I think I found one in the app store called EXF mobile that supports UNX pedals but haven't tried it yet
@_kukaracha_ 3 жыл бұрын
I have question. What about IR's? Is that ok with quality on nux mg 300?
@ThePedalGuy 3 жыл бұрын
The mg300 is supposed to support third party IRs but I haven’t tried it yet.
@billkendall5532 3 жыл бұрын
Yes you can load 36 different IRs 1 per user patch. They work great. I've tried all kinds of them.
@ThePedalGuy 3 жыл бұрын
@@billkendall5532 thanks for chiming in. I have a IR vid coming tomorrow as well.
@davidalley7533 2 жыл бұрын
Could you recommend this pedal over the Boss GT-1
@ThePedalGuy 2 жыл бұрын
Haven't tried the GT1 so I couldn't give you an objective answer.
@edoshonen4882 2 жыл бұрын
I have tried that pedal and tho is bigger with more stuff, this pedal is way ahead of the boss gt-1
@lehcamdom 3 жыл бұрын
Hi Scott! Do you recomend the Nux Mg 300 over the Nux Ceberus?
@ThePedalGuy 3 жыл бұрын
Hi. Well, that's a tough one as they are quite different. Cerberus is a multi FX that's based on analog & digital tech and no amps. The MG-300 is all digital modeling with fx and amps. There's also a big price difference between them
@odenirandavid6620 Жыл бұрын
I am so scared to update to the latest, because i don't want to loose my present patches,so please i need a good explanation,thanks
@ThePedalGuy Жыл бұрын
You can back up your presets with the editor.
@odenirandavid6620 Жыл бұрын
@@ThePedalGuy oh thanks so much boss
@frigotv1 3 жыл бұрын
Hi there;) i guess you know how, tahts why i ll ask you ;) how can i record my guitar with nux 300 into my DAW? Using studio one 5 pro , but Im not able to set it to work correctly. Can you sggest some trick ? Thx a lot. You doing great job with all these reviews here. Life will be much more complicated without your support ;) well done , thx for all
@ThePedalGuy 3 жыл бұрын
I’ll see if I can do a quick vid on this
@frigotv1 3 жыл бұрын
@@ThePedalGuy YOU ARE NUMUERO UNO :) i was not expecting such fast reaction , thx . Looking forward new video :)
@ThePedalGuy 3 жыл бұрын
@@frigotv1 happy to help. I will be showing it with reaper but the procedure should still be the same.
@frigotv1 3 жыл бұрын
Amazing. Can you ,please, also explain how to use sound monitor and also how to set needed ins and outs ? Then it would be perfect ;) thank you once again ;)
@ThePedalGuy 3 жыл бұрын
@@frigotv1Not quite sure what you mean. My plan is to show a pretty quick and easy setup that should translate to any DAW.
@butteredshrimp3977 3 жыл бұрын
Did they add new pedals?
@ThePedalGuy 3 жыл бұрын
Not yet.
@sandroquinta1125 Жыл бұрын
Too shame they abandoned updates for the MG300, which I think it's a huge mistake. It lead people suspect that the same will quickly happen to the newer MGs. Even the Mighty Plug Pro has greater flexibility and more effects than MG300. It's ridiculous. I really miss the effects that Mighty Plug Pro, MG400 and MG30 have. Because of that, I'm done with MG300, actually with NUX. Too shame!
@ThePedalGuy Жыл бұрын
Sorry you feel that way. And to my knowledge we are considering more updates for the MG300 as it is a current product. So maybe be a little more patient
@sandroquinta1125 Жыл бұрын
@@ThePedalGuy Maybe! Thank you anyway for your answer and for your work
Nail That Lick
Рет қаралды 6 М.