Trying to shove some Aluminum Oxide pads inside of my 3070 Ti. Was supposed to buy Aluminum Nitride pads instead.
Пікірлер: 33
@sovu9399 Жыл бұрын
Dude, Copper is completely safe as long as it does not touch any other gpu components but Vram. I too have not just copper shims but the whole copper plate on my Vram, and no kapton tape applied at all. All cool, no issues at all.
@darkoz1692 Жыл бұрын
Not to mention that all decent cpu/gpu coolers have copper base plates. And yet regular guys on KZfaq think they know better.
@sovu9399 Жыл бұрын
@@darkoz1692 they do know better, because it helps to lower vram temperatures drastically.
@HenryDailyLifeАй бұрын
you would also need to consider the extension of the parts under heating condition
@angryleeАй бұрын
Which makes the idea even more stupid
@Xantylon742 ай бұрын
5:45 why did you not use new good flexible thermal pads instead?
@Super1Rad Жыл бұрын
Once you went too far with sanding your ceramic shims you could have swapped the thermal paste for thermal putty, putty is actually meant to fill gaps so you can use an excess and just use the pressure of screwing the cooler back on to squeeze out all the putty that isn't needed.
@angrylee Жыл бұрын
kzfaq.info/get/bejne/jdmnmbWDrNWue3k.html
@harrydijkstra99369 ай бұрын
I would use a single sheet/shim and use U6 Pro putty on both sides, this way there is room for expansion otherwise memory chips can crack on the solder pads
@aadi21349 ай бұрын
that jawline is sharper than ma kitchen knife damn
@v.98766 ай бұрын
Not good for boxing
@jll97648 ай бұрын
Defeats the purpose if you gotta stack pads.
@pav1u4 ай бұрын
i have more than 9 3080's and 3090 all copper modded day one, they aren't isolated in any way, i use thermal putty + copper shims, lovely
@aaronphelps22424 ай бұрын
instead of changing the thickness of the pads, what if you modified the heatsink to squeeze snuggly on to the pads with some springs under small tension? Aluminum can be a lot easier to work with.
@aleksandrbmelnikov6 ай бұрын
Or just water cool your graphics card with a full-coverage block and correct pads. Save yourself the risk of cracking solder joints under chips, and keep stock cooler minty-fresh, for if you want to resell your card later. Plus the buyer starts off with a newly repasted GPU.
@mrm8818 Жыл бұрын
tl:dr watch his other video cos this didnt work
@1989johno6 ай бұрын
make a ceramic mold , under high pressure
@EpicGamingEct5 ай бұрын
i raise you a shot glass of vodka and scrap the ceramic pads , i am using 99% pure Silver pads !!!! works great 78c on the memory !!!
@albion_i5 ай бұрын
why not instead get some good thermal pads like the minuspad 8 and call it a day? yes it wont be as cool as copper or ceramic but defenately better than stock
@angrylee5 ай бұрын
kzfaq.info/get/bejne/jdmnmbWDrNWue3k.html
@albion_i5 ай бұрын
thx when i get a gpu that even has a the coler contact the memory il use that(i have a 1660tirn)
@katerang313 ай бұрын
dude why u reading off the wall? say your own opinion bruh and coper modding isn't risky why u even care? it's his card, not yours so
@Marauder19813 ай бұрын
You sound 100% like Latka XD. You know? That Andy Kaufman character
@angrylee3 ай бұрын
Why did you have to say this?
@OzanOzz3 ай бұрын
please work on better presentation. Stop excessive eye movements. and i had to speed up 1.5x to focus on the subject
@TechnologyHive5 ай бұрын
Keep doing this, so your GPU's break and they are sent to people like me to fix them :D
@GoMArkkrAM4 ай бұрын
People getting sick, buying a GPU card and then becoming prick about number, temps, tweaks or whatever, wasting the time on these things instead of the purpose the GPU was designed for….PLAY GAMES. That’s make no sense
@angrylee4 ай бұрын
It's not about numbers, it's about what they represent. If, in this case, mem temps hit 110 degrees, cards starts to thermal throttle, drop performance, fans start spinning like crazy. So it's not about number, it's about getting maximum from the thing you bought making the card last as long as possible while having a very quiet and silent in some scenarios card. Fan is literally does not spin. The card will last much longer and experience with the computer will be much more pleasant. I just don't wanna hear a sound of a vacuum cleaner in front of me.
@pav1u4 ай бұрын
you are a low iq citizen, congrats
@goofyb69513 ай бұрын
nvidia failed at designing these cards. this is a fix for the cards' shortcomings and is not a waste of time. The life of the card will be a lot longer if it isn't destroying itself.
@GoMArkkrAM3 ай бұрын
@@goofyb6951 make sense in this case, ya right! In other hand, there are people crazy about numbers too (when everything is running “normal”).