NX PMI/MBD for Designers and Engineers

Рет қаралды 21,712

Күн бұрын

The paperless workspace has been hype for decades, but recent efforts are pushing it to the forefront. How can you support your team and be successful in your initiatives?
It's time to get your company and supply chain to buy into Advanced Manufacturing, Product Manufacturing Information (PMI), and Model-Based Definition (MBD).
In this video, we discuss PMI in the NX environment. Since PMI complies with industry standards for 3D product definition, product teams now have the ability to use 3D models as a sanctioned method for fully documenting product and manufacturing information. By associating PMI with a "living" part, information is re-used throughout the product lifecycle.
For more resources please visit appliedcax.com/resources-and-s...

Пікірлер: 10

@mohamedcheraitia3907 6 жыл бұрын

Very good thanks!

@ProdigyOllum 3 жыл бұрын

Hello Matt Martin, just watched rhe Video about PMI. I have a more specific question regarding PMIs in assemblies. Today we have drawings of our assemblies how they are mounted to a surrounding geometry. We made in our old system a container with that surrounding geometry that is switched on in the views of the drawings. Now we want to do that with PMI in NX. The problem comes up with the surrounding geometry. Our procedure is now to take the assembly in NX, put in the PMI, including e. g. texts that refer to the surrounding geometry (for example in a assembly that is bolted to some steelworks we have text like "conserve threads of steelworjs with agent xy". Then we save that assembly with its views and switch to tc vis, were we load the assembly, and additionally the surrounding geometry and then we safe that as a session to the assembly. Now my question: Do you have any idea, how we can have the same effect by only using NX? We have the tc vis in our production where the guys there open the assembly and view the PMI. Thabks in advance, Matthias

@marthinusmarais 3 жыл бұрын

INGM gang where you at? ashwin se boys

@wilhelmmarais6468 3 жыл бұрын

@joshuavanzyl6536 3 жыл бұрын

Daar van hy ouens😂🤙

@EVPchannel850 5 жыл бұрын

😎👍

@user-ei8re1kw7v 2 жыл бұрын

오 쌤 ㅋㅋㅋ 라방 가시죠 ㅎ

@vinodhiremath6986 2 жыл бұрын

How do i create a dynamic profile symbol and create see thru line

@mohamedcheraitia3907 6 жыл бұрын

how to add or install PMI to NX 12?

@AppliedCAx 6 жыл бұрын

PMI is controlled by your license file and is a toggle on the Applications tab. Click on PMI and the tool bar will show. If you don't have the license & you will get an information window. NX bundles Mach 2 and higher have PMI. If you have a Mach 1 license a floating PMI license.