😂😂😂 Same here !🙌

THIS IS |D|0T|C!!! 😂😝😛😜🤣 This is definitely a POOR if not the WORST demonstration of what's the real purpose of using punch needle!!! Though the use of punch needle is correct, (if one had the traditional "fixed length", the instructions of using the traditional one would still be the same compared with this fancy "adjustable length" punch needle), it defeats the purpose of why even use a punch needle!!! Punch needles are use to create "fur"like design...like if you're making a Xmas throw pillow cover with Santa Claus design making his hair & beard furry & fuzzy...or a bag with a soft fur cat design!!! So it is important that AFTER FINISHING A SECTION, THE OPPOSITE SIDE THAT HAS THE LONG YARN STRAND FLOWING OUT MUST BE TRIMMED TO CUT THE LOOP AND BE BRUSH OUT!!! First, IT IS VERY STUPID if I'm using some fancy punch needle like yours just to do that flat triangle you keep insisting to be the front when I can easily get a cheaper large hole cross-stitch needle or embroidery needle to do that design in a much more secured backstitch. Second,(and god forbid this didn't happen to anyone STUP|DLY following you after watching this |D|0T|C VIDEO!!!) If the other side that have the long strands of yarn loops got caught with some zipper of your cloth or stray fiber of some basket or plant nearby or simply by some naughty kid playing around, then it will unravel & all your hardwork will just go down the drain unless you repeat the ENTIRE PROJECT just so it won't be worthless!!! If all the yarn loop were cut before the disaster strikes, all you have to repair is that part that got caught & unravel... not the entire project as they are no longer interconnected!!! In fact, there are some punch needle creation that are expertly punch close enough that if a strand got pulled out, you just need to brush out those that remain to cover up. LASTLY, it's important to mention that anyone doing this project, the end product (unlike other embroidery) must only be handwash. It's just so DUMẞ if one fell in love with your expensive fancy punch needle, follow your CRAPPY INSTRUCTIONS & just destroy everything in the washing machine!!! SERIOUSLY, RESEARCH BEFORE POSTING STUP|D VIDEO!!! 🤣😜😛😝😂

Mi piace molto questa lavorazione. Adatta sia per tappeto che cuscini. Come potrei ordinarlo? Grazie molto

@@lorettadonini79 En Internet y tiendas de costura y artesanía. Se llama punch needle.❤️

Punch needle. In the Internet and the sewing and craft stores. ❤️

저도 첨보는건데, 6:22 마지막에 뒷면을 보니 3:59 이 원리로 고정이 되는게 아니라 뒷면에 고리처럼 남겨놓고 앞으로 전진하는것같아요. 그래서 앞에서 당기면 바느질처럼 고정되는게 아니라 그냥 쭉 당겨지나봐요...

재봉틀 원리랑 같은듯ㅋ

고정은 안 되는거 같지만 쉽고 재미있어 보이네요.

Pp

pagi mbak google mau tanya di mana beli jarumnya

THIS IS |D|0T|C!!! 😂😝😛😜🤣 This is definitely a POOR if not the WORST demonstration of what's the real purpose of using punch needle!!! Though the use of punch needle is correct, (if one had the traditional "fixed length", the instructions of using the traditional one would still be the same compared with this fancy "adjustable length" punch needle), it defeats the purpose of why even use a punch needle!!! Punch needles are use to create "fur"like design...like if you're making a Xmas throw pillow cover with Santa Claus design making his hair & beard furry & fuzzy...or a bag with a soft fur cat design!!! So it is important that AFTER FINISHING A SECTION, THE OPPOSITE SIDE THAT HAS THE LONG YARN STRAND FLOWING OUT MUST BE TRIMMED TO CUT THE LOOP AND BE BRUSH OUT!!! First, IT IS VERY STUPID if I'm using some fancy punch needle like yours just to do that flat triangle you keep insisting to be the front when I can easily get a cheaper large hole cross-stitch needle or embroidery needle to do that design in a much more secured backstitch. Second,(and god forbid this didn't happen to anyone STUP|DLY following you after watching this |D|0T|C VIDEO!!!) If the other side that have the long strands of yarn loops got caught with some zipper of your cloth or stray fiber of some basket or plant nearby or simply by some naughty kid playing around, then it will unravel & all your hardwork will just go down the drain unless you repeat the ENTIRE PROJECT just so it won't be worthless!!! If all the yarn loop were cut before the disaster strikes, all you have to repair is that part that got caught & unravel... not the entire project as they are no longer interconnected!!! In fact, there are some punch needle creation that are expertly punch close enough that if a strand got pulled out, you just need to brush out those that remain to cover up. LASTLY, it's important to mention that anyone doing this project, the end product (unlike other embroidery) must only be handwash. It's just so DUMẞ if one fell in love with your expensive fancy punch needle, follow your CRAPPY INSTRUCTIONS & just destroy everything in the washing machine!!! SERIOUSLY, RESEARCH BEFORE POSTING STUP|D VIDEO!!! 🤣😜😛😝😂

You did punch needle before but you still didn't recognize all the errors!!! THAT SAYS A LOT ABOUT YOUR IQ... & HOW CRAPPY MUST BE YOUR PUNCH NEEDLE WORK!!! 🤣😜😛😝😂

No

어렵나요??

@@BB-jx6mi  처음엔 어려운데 감 잡으면 쉬워요❤

where do we get this type of needls,and are they in sizes?

Hi

Now I question how your mother do her punch needle 'cause surely your mother's work must be better than this crap... or is it just as crappy as this!!! 🤣😜😛😝😂

THIS IS |D|0T|C!!! 😂😝😛😜🤣 This is definitely a POOR if not the WORST demonstration of what's the real purpose of using punch needle!!! Though the use of punch needle is correct, (if one had the traditional "fixed length", the instructions of using the traditional one would still be the same compared with this fancy "adjustable length" punch needle), it defeats the purpose of why even use a punch needle!!! Punch needles are use to create "fur"like design...like if you're making a Xmas throw pillow cover with Santa Claus design making his hair & beard furry & fuzzy...or a bag with a soft fur cat design!!! So it is important that AFTER FINISHING A SECTION, THE OPPOSITE SIDE THAT HAS THE LONG YARN STRAND FLOWING OUT MUST BE TRIMMED TO CUT THE LOOP AND BE BRUSH OUT!!! First, IT IS VERY STUPID if I'm using some fancy punch needle like yours just to do that flat triangle you keep insisting to be the front when I can easily get a cheaper large hole cross-stitch needle or embroidery needle to do that design in a much more secured backstitch. Second,(and god forbid this didn't happen to anyone STUP|DLY following you after watching this |D|0T|C VIDEO!!!) If the other side that have the long strands of yarn loops got caught with some zipper of your cloth or stray fiber of some basket or plant nearby or simply by some naughty kid playing around, then it will unravel & all your hardwork will just go down the drain unless you repeat the ENTIRE PROJECT just so it won't be worthless!!! If all the yarn loop were cut before the disaster strikes, all you have to repair is that part that got caught & unravel... not the entire project as they are no longer interconnected!!! In fact, there are some punch needle creation that are expertly punch close enough that if a strand got pulled out, you just need to brush out those that remain to cover up. LASTLY, it's important to mention that anyone doing this project, the end product (unlike other embroidery) must only be handwash. It's just so DUMẞ if one fell in love with your expensive fancy punch needle, follow your CRAPPY INSTRUCTIONS & just destroy everything in the washing machine!!! SERIOUSLY, RESEARCH BEFORE POSTING STUP|D VIDEO!!! 🤣😜😛😝😂

Марина, скажите пожалуйста, как стежки держаться на изнанке??

@@vitagor2482 в данном видео стежки на изнаночной стороне, ни как не закреплены, а так должна быть косичка по изнанке

А смысл ,если это не держится ...

@@helenchevokina4998 возможно, можно закрепить при помощи специального клея

@@user-qp9ox2dt5h ковры делали таким способом и закрепляли клеем ? Если так ,то это не очень ...

ㄱ

THIS IS |D|0T|C!!! 😂😝😛😜🤣 This is definitely a POOR if not the WORST demonstration of what's the real purpose of using punch needle!!! Though the use of punch needle is correct, (if one had the traditional "fixed length", the instructions of using the traditional one would still be the same compared with this fancy "adjustable length" punch needle), it defeats the purpose of why even use a punch needle!!! Punch needles are use to create "fur"like design...like if you're making a Xmas throw pillow cover with Santa Claus design making his hair & beard furry & fuzzy...or a bag with a soft fur cat design!!! So it is important that AFTER FINISHING A SECTION, THE OPPOSITE SIDE THAT HAS THE LONG YARN STRAND FLOWING OUT MUST BE TRIMMED TO CUT THE LOOP AND BE BRUSH OUT!!! First, IT IS VERY STUPID if I'm using some fancy punch needle like yours just to do that flat triangle you keep insisting to be the front when I can easily get a cheaper large hole cross-stitch needle or embroidery needle to do that design in a much more secured backstitch. Second,(and god forbid this didn't happen to anyone STUP|DLY following you after watching this |D|0T|C VIDEO!!!) If the other side that have the long strands of yarn loops got caught with some zipper of your cloth or stray fiber of some basket or plant nearby or simply by some naughty kid playing around, then it will unravel & all your hardwork will just go down the drain unless you repeat the ENTIRE PROJECT just so it won't be worthless!!! If all the yarn loop were cut before the disaster strikes, all you have to repair is that part that got caught & unravel... not the entire project as they are no longer interconnected!!! In fact, there are some punch needle creation that are expertly punch close enough that if a strand got pulled out, you just need to brush out those that remain to cover up. LASTLY, it's important to mention that anyone doing this project, the end product (unlike other embroidery) must only be handwash. It's just so DUMẞ if one fell in love with your expensive fancy punch needle, follow your CRAPPY INSTRUCTIONS & just destroy everything in the washing machine!!! SERIOUSLY, RESEARCH BEFORE POSTING STUP|D VIDEO!!! 🤣😜😛😝😂

I think it would be better to use a fabric adhesive. Try a liquid type of adhesive. kzfaq.info/get/bejne/jtumlNh2m6fIkmw.html I hope it helped you 🙂

@@nyangstitch wow! Thanks for this 💗 I'll definitely try this one!

뒷면의 실을 거치적거리지 않을 정도로 짧게 잘라주면 괜찮아요. 다만 손에 많이 닿는 소품을 만든다면 실을 정리할 필요가 있겠습니다 :-) 제 생각엔 불로 지지는 것은 좀 위험할 것 같고, 매듭을 짓거나 접착제를 이용하면 될 것 같아요!

키트에 포함된 펠트지로 수틀 뒷면 마무리를 할 거라 괜찮아요 :-) 만약 다른 소품을 만드는 상황이라면 마무리 작업이 필요하겠습니다.

ㅋㅋㅋㅋㅋ 공감..