NZXT Kraken 240 RGB Setup and wiring guide

Рет қаралды 139,571

9 ай бұрын

Here's a video on how to setup and wire the NZXT Kraken 240 RGB all in one CPU cooler. Here I'm using it in the H6 Flow RGB and giving you the wiring logic for setting it up and connecting everything you need to. The full specs of the system are below if you need help.
I'd also recommend checking out these other related videos:
Where should you install your AIO liquid cooler? • Where should you insta...
Don't make these thermal paste mistakes (how not to apply thermal paste) • Don't make these therm...
Push Pull mistakes to avoid with all in one coolers • Push Pull mistakes to ...
Avoid these problems with your all in one CPU cooler • Avoid These Common All...
How to connect NZXT F120 and F140 Core RGB Fans • How to connect NZXT F1...
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions. Unless otherwise stated, the videos are not sponsored financially.
Please note links listed here include affiliate links which may earn me a commission. Find out more below.*
Amazon US - amzn.to/3u2qAjN
NewEgg - bestbuy.7tiv.net/PyWgNj
Amazon UK - amzn.to/49mpQpN
Overclockers - tidd.ly/46eCaG5
Amazon FR - amzn.to/3QJyJCw
Amazon IT - amzn.to/3FOre6U
Amazon DE - amzn.to/3FLaNbA
CaseKing - tidd.ly/3sgcRFz
Amazon CA - amzn.to/3FOrfI0
Amazon AU - amzn.to/3tZZHNl
Specs of this build
Motherboard - Asus ROG STRIX Z790-A GAMING WIFI 2 amzn.to/46TdrYN
CPU - Intel Core i9-14900K amzn.to/46xZ101
RAM - Corsair Dominator Titanium 32GB 72000MT/s go.corsair.com/baya19
GPU - Asus ROG Strix RTX 4090 OC White Edition (amzn.to/3tr1nzc)
PSU - Corsair RM Shift Series 1000X Shift ( • Corsair RMX shift PSU ... )
Fans - NZXT F120 and F140 Core RGB Fans • How to connect NZXT F1...
AIO - NZXT Kraken 240 RGB amzn.to/45UfqKY
NVMe - Crucial T500 NVMe 2TB
Other NVMe - Crucial T700 • How to install and tes...
Crucial P5 Plus - • How to install Crucial...
Case - NZXT H6 Flow RGB • NZXT H6 Flow RGB In de...
Features of the NZXT Kraken 240 RGB:
Pump features an embedded 1.54” square LCD screen to display real-time system info or custom images
Screen supports the display of custom images, animated GIFs, and CAM system info with adjustable orientation
Powerful Asetek pump provides optimal cooling and up to 2,800 RPM whisper-quiet operation
Includes high-performance PWM fans with fluid dynamic bearings for optimal cooling
Includes F140/F120 RGB Core fans
Single breakout cable simplifies installation
Rubber tubing is reinforced with nylon-braided sleeves to prevent leaks
Control custom screen content, RGB, pump speed, and zero-noise fan curves with NZXT CAM software.
See the specs here - nzxt.com/en-GB/product/kraken...
🏆Big thanks to my super awesome KZfaq members:
SirSpawnsALot, Meatykeyboard, Rawrr483, Space Cannons, Mike S, Jay Shank 007, Jason Morgan, Starastin, McFarty, Chief Hao, Kraken Tortoise, Chris Thompson, Lank Wimb, Bhushan Mahesh Gandhi, Roburrt, isgursoy, Beaster Bunny and Gaming Nomad.
Want to send me things for videos or other reasons? Use this address:
The Provoked Prawn
PO Box 13277
MANNINGTREE
CO11 9BE
United Kingdom
🔫Sub to my gaming channel🔫 / @theprovokedprawnpews
Come check me out on Twitch - / provokedprawn
Join my Discord to keep up to date or ask questions / discord
Follow on Reddit / theprovokedprawn
Read this far? You're awesome. Smash those sub and like buttons!
📌 Support the channel:
😍 See the benefits of being a member here - / @theprovokedprawn
Get some merch - the-provoked-prawn.creator-sp...
Check out my dedicated Amazon Storefront to see my current fave gear - www.amazon.com/shop/theprovok...
📸 Recorded with amzn.to/3kYrhGP

Пікірлер: 174

@typsygypsy1736 8 ай бұрын

Honestly thank you so much for taking your time and making this video. I was completely stuck on wiring up this aio

@TheProvokedPrawn 8 ай бұрын

You're welcome!

@Beyroz 9 ай бұрын

Omg i am so lucky. I am currently looking for parts for my new pc and this video told me exactly what i should do and what i should buy thank you so much for this good plain and simple video

@TheProvokedPrawn 9 ай бұрын

Glad I could help. Hope you enjoyed enough to sub

@Beyroz 9 ай бұрын

yes sir@@TheProvokedPrawn

@benjaminvelic8577 5 ай бұрын

One of the best setup and wirigin guides I've ever seen 10/10 also quality of video 10/10!

@TheProvokedPrawn 5 ай бұрын

Glad you liked it! Hope you enjoyed it enough to subscribe 🦐

@Benrix11 5 ай бұрын

Great video. I just got the nzxt kraken 240 rgb for my system. your guide was invaluable to helping me set everything up (esp. since i have the same motherboard!) Thanks again for posting.

@TheProvokedPrawn 5 ай бұрын

Glad I could help! Hope you enjoyed enough to sub

@M22H22 4 ай бұрын

this is suche a good tut it explains where the wires have to go correctly and it makes installing this nice aio so easy im so grateful for this vid.😍

@chills_tiny_mom 2 ай бұрын

this channel is now my go to for finding out how to wire my fans I commend you sm

@TheProvokedPrawn 2 ай бұрын

Thanks for watching 👍🏼

@Zortan12 6 ай бұрын

High quality guide man. Thanks

@TheProvokedPrawn 6 ай бұрын

Thanks. Hope you enjoyed enough to subscribe 🦐

@JamieR 8 ай бұрын

Great video 😊👌🏻 Thank you! I would prefer daisy chain rgb solution for all brands instead of a hub as it is easier to wire up, but perhaps a bit more messy managing. With each system using proprietary connectors make mixing and matching very challenging!

@jazcena 8 ай бұрын

planning on getting this beaut next week, so i’ll definitely be coming back to your video:)

@luisenriquepieri515 4 ай бұрын

Thank you for the video I follow your step and set up in 30 min

@TheProvokedPrawn 4 ай бұрын

👍🏼👍🏼

@XXSkippyRooXX 8 ай бұрын

Cheer heaps mate.. Without your videos id be be lost af

@TheProvokedPrawn 8 ай бұрын

Glad to help!

@dedeman7108 6 ай бұрын

I just ordered my 280mm nzxt kraken, does it come with a fan splitter or should i buy one? (I only have 1 fan connector free on my mobo)

@clueless4401 7 ай бұрын

im using a 360 mm nzxt aio with all the same wires but I'm gonna be using lian li fans instead of the nzxt fans so I'm wondering If I just plug the USB connector from the pump into the motherboard since I'm not gonna be using the fan hub included with the aio?

@ronald0122 4 ай бұрын

i have pump_fan1 and cpu_fan1. where should i connect it? are there any differences/advantages?

@finalsora4704 5 ай бұрын

I’m having some trouble with my Elite kraken 360 should my usb go straight into the mother board or do I need the light adapter for it ?

@ILLum1n4t1on 7 ай бұрын

i have this cooler + the H5 flow RGB case. Can i wire the fans with only 1 RGB controller? (3 rgb fans connected to the controller ) and 1 RGB fan from the case connected on a 4 pin RGB motherboard?

@therealjut146 3 ай бұрын

I have this aio, but I don’t recall having a backplate for the mount. Is that a bad thing, I’m curious if I’ve been needing a backplate for it but haven’t been using one this whole time

@lasvista2tech 5 ай бұрын

I don't think anyone has done a guide as comprehensive and easy as this, 3 years ago I installed one on my own and going through the manual and online guides wasnt helping and ended up taking the pc back to the shop and wait 2 weeks for them to build it

@TheProvokedPrawn 5 ай бұрын

Glad to be of assistance

@nephiteszodiac5570 8 ай бұрын

Do you think I could fit the aio in a Fractal pop mini case?

@siyuanli2580 8 ай бұрын

Why the pump speed is not changing even though I already changed it in the NZXT CAM?

@presleypictures2533 Ай бұрын

If you get bored please make a video on enabling expo in NZXT b650e BIOS (AMD specific). I'm stuck and cant find anything on NZXT that isnt old! Thank and your videos are really helpful. Built my first PC with your help!

@sharjawee 9 ай бұрын

Beautiful setup

@humblebee367 6 ай бұрын

Can you use existing backplate that came with cpu or do you have to use the one that came with it?

@MrHulsi 8 ай бұрын

Nice vid bro, build my pc back in january with a 13600k, 32gb DDR5 @6400 and a 4070ti. Works like a charm but my air cooler ( deepcool ) after refitting still showing bad results on Cine and demanding games. ( 80 degrees max ) . I've got a Fractual Design Meshify C so I need the 240 version. I've already got a RGB controller with 5 ports on the back so I'll going for the black standard version. Big issue is, I need to unplug almost everything to install the back bracket..... but hey you want results, you gotta work for them haha.

@JamieR 8 ай бұрын

Have you tried undervolting? I got a 13600k down from 80+ to 59-65c full load. Most cores 60, 1-2 65c.

@RoDev 8 ай бұрын

Mine is completely missing the RGB hub.

@Shnick 4 ай бұрын

My non rgb 240 is plugged in to the usb header, and shows up as a removable drive. How do I get it to keep the power, but not show up as a removable device?

@marki_mark3410 8 ай бұрын

I have the black 240 AIO and gotta say the fans did develop a squeak after about a year or 2, replaced them with noctuas

@redllamachan2517 5 ай бұрын

I’m building a pc soon with this Aio cooler, should I switch the fans for intake as opposed to exhaust?

@burner6828 2 ай бұрын

is there a way to replace an existing cooler without removing the motherboard? like can i do it with the motherboard still installed? i have a pre built and im too scared to remove everything but need to replace the pump. can you pls do a video? :(

@simmadpaul2880 4 ай бұрын

Excellent video.

@TheProvokedPrawn 4 ай бұрын

Thanks for watching!

@helloimjuly 6 ай бұрын

can i plug the rgb connectors into my corsair controller??

@blade000007 7 ай бұрын

I am trying to install this on a 1700 socket motherboard and the backplate, when screwed in all the way has some play so it's not snug. Is this normal? thanks

@goofyman6708 6 ай бұрын

Flip the back support

@imclixster 6 күн бұрын

Do you have to screw the fans on from the top of the case? My fans fit underneath with the radiator but now good enough where I can screw all 4 thru outside on the top

@imclixster 6 күн бұрын

Like could you just screw the fans onto the radiator into place without screwing them from the outside on top?

@raptide3651 15 күн бұрын

Hey I have the same motherboard, ram and cpu cooler and I am getting a red cpu signal and a yellow dram one. Can you please help with this? This is very frustrating

@henryhesseler4460 9 ай бұрын

By me is The ring which you Need to build in is Not in The middel its not corect. Pls help me.

@SoyPr0stitut0 8 ай бұрын

So I Bought The NZXT Fan/RGB Controller Which Comes With 6 RGB Ports & 3 Fan Ports. Could I Hook Up All The Cables From The AIO Into That Or Do They Have To Go To The Splitter Cable That Comes Out The AIO? Please Help!

@Psychronix 5 ай бұрын

I have the 360mm and theres a few lights that dont work on the fans. Could a loose connection cause this or are the lights just faulty? Everything works as it should except for a few small bulbs in the fans.

@TheProvokedPrawn 5 ай бұрын

I'd ask NZXT support. Sounds like a faulty product

@wolverineapurva 6 ай бұрын

Do I do aio pump or cpu fan

@senior7332 6 ай бұрын

is the kraken compatible with b650 gaming plus wifi

@tpbriplahey7384 16 күн бұрын

Can you change the lcd background to white instead of black ?

@Ferry35 7 күн бұрын

Veri nice unboxing man Like sub 👍👍

@lyrictdk 9 ай бұрын

I have the 360 version and ugh the rgb is stuck on white 😭 I need to fix it but I'm too lazy

@soparniksopranik 5 ай бұрын

do i need sata connection if i dont have the rgb version

@SSBBMario301 7 ай бұрын

Awesome video

@TheProvokedPrawn 7 ай бұрын

Thanks! Hope you enjoyed enough to subscribe 🦐

@VR_Chain 12 күн бұрын

I have them all plugged in but it still isnt cooling the cpu idk what im doing wrong

@NoFear1979 4 ай бұрын

8:20 The Leonardo Di Caprio picture = priceless 😂

@masterkiller990 3 ай бұрын

I'm currently 5nights in can someone tell me Is it suppose to connect to cpu fan or aio pump?

@malitver 5 ай бұрын

do i buy this cooler for my cpu i5-12400f?

@afatsumirima3647 Ай бұрын

is the non rgb version the same or different from this installation

@yosmch 4 ай бұрын

Is it possible to wire more FAN power cables besides the 3 with splitter cables directly to the AIO? This solves potential USB issues on the MOBO for many people

@TheProvokedPrawn 4 ай бұрын

I wouldn't think so. Just get this instead kzfaq.info/get/bejne/mp6meK-TvL3Fc4U.html

@ben_wesker 8 ай бұрын

Just want to know where to connect the nzxt aio pump 3pin connector in gigabyte aorus elite ax motherboard?

@TheProvokedPrawn 8 ай бұрын

AIO pump kzfaq.info/get/bejne/br17arme2t6qqKM.html

@maddikona 4 ай бұрын

mate, i have a problem. I have this cpu cooler and i installed it with your tutorial, everything was good, but now it is like rare. It restarst over an over, it is like disconnecting, but everything like de pins, the cable, all of that is okay, and i dont know what to do :c

@EisAntares 9 ай бұрын

I'm a bit worried, I'm about to buy parts to make a build similar to the one you made in the short (h6 flow, 13700k, 850w PSU 80 plus gold, and either a 4070ti or 4080) and I'm torn between buying a cheaper 360 Aio or a 240 NZXT (which honestly I like better). You think I'll be fine with a 240? I never built a PC so I would be grateful for a response 🙏

@TheProvokedPrawn 9 ай бұрын

360 provides better cooling performance tbh

@JamieR 8 ай бұрын

If you want a cheaper one, Thermalright Frozen Notte 360 is fantastic bang for the buck. Highly recommended.

@NTT1223 8 ай бұрын

I just got a player two prime from NZXT and it comes prebuilt with this cooling system. Will I ever have to refill the liquid cooling or anything of that sort?

@TheProvokedPrawn 8 ай бұрын

No.

@NTT1223 8 ай бұрын

@@TheProvokedPrawn oh schway.

@danym48 16 күн бұрын

Thanks so much for the video. I really think they are to many cables and managent is a nightmare.

@razvanmiron8411 7 ай бұрын

Hi. The CAM software does not recognize my AIO. It works fine but I can only see Liquid temperature on the display. I tried few things from their website such as power drain or reinstalling the app but nothing.. any tips?

@TheProvokedPrawn 7 ай бұрын

I assume you have connected the usb connection to your motherboard and the cable is fully connected? Otherwise it wouldn't recognise it.

@razvanmiron8411 7 ай бұрын

@@TheProvokedPrawn yes, I did. But the AIO is connected in a splitter with the RGB controller. Shouldn t be any problem with that, right?

@joereid84 7 ай бұрын

i got same problem with my nephews build the cooler will work with spilter but cam wont register the RGB fans yet they are spinning if i swap the splitter with the cooler the rgb will work then not the cooler display any ideas?@@razvanmiron8411

@aestarez 4 ай бұрын

Where does the sata power cable go ?

@osnapitzkate 8 ай бұрын

so with this cooler we don’t need to apply thermal paste to the cpu, it already comes pre-applied, right?

@freakiehammie 8 ай бұрын

Nope u dont need any thermal paste if its already pre applied

@jazcena 8 ай бұрын

nope but i like to always have thermal paste with me just incase :)

@theirene Ай бұрын

Hi, thank you for this guide. Do you have a installation version for swapping these fans out for Lian Li fans? Would I attach fans to Lian Li controller rather than NZXT one? I worry this would interfere with cooler capabilities(?).

@TheProvokedPrawn Ай бұрын

kzfaq.info/get/bejne/rJubd7mL0su0iYU.html

@theirene Ай бұрын

@@TheProvokedPrawnThank you :D Do you have a video addressing creaking/rattling sounds coming from this?

@TheProvokedPrawn Ай бұрын

@@theirene I've not heard creaking or rattling. If it's bad and continuous then you might want to request an RMA

@theirene Ай бұрын

@@TheProvokedPrawn Thank you sir, I appreciate your insight. I was afraid that may be the case.

@theirene Ай бұрын

@@TheProvokedPrawn RMA and got a replacement cooler! No sound :)) Thanks again!

@Substanceex 6 ай бұрын

my motherboard doesn’t have an aio pump header, can i still use it?

@TheProvokedPrawn 6 ай бұрын

it's ok, just use CPU fan instead :)

@user-jv4ht6tw9u 8 ай бұрын

Great video, thanks for the great step by step. I have a question regarding the fan's direction. how do you know the fan direction? you mentioned it is set as exhaust fan, but how do you know the direction of the fan blowing without turning it on? would there be a case of intake setup as opposed to exhaust setup?

@TheProvokedPrawn 8 ай бұрын

kzfaq.info/get/bejne/q7Z5gNlklbzXY6s.html

@davidharrison7825 7 ай бұрын

Says cable plugged at what time in video 🤔

@derekcaldwell9238 7 ай бұрын

Where do I plug in the SATA plug can’t find it on my motherboard

@TheProvokedPrawn 7 ай бұрын

Power supply unit.

@user-ps1dc6fh9o 6 ай бұрын

why can i see my pump fan speed but my fan speeds are saying 0rpm?

@nottnert 7 ай бұрын

I need some help here, i installed my radiator and pump and everything turns on, but on cam the fans rpm doesnt display and everythign is just hotter now, why?

@TheProvokedPrawn 7 ай бұрын

Have you connected the USB from the pump to the motherboard. And connected to CPU fan or AIO Pump on the motherboard

@nottnert 7 ай бұрын

@@TheProvokedPrawn yes to both

@Davvyk 4 ай бұрын

was going air cooler for my build in h6 but then when i see that vertical gpu i know im gonna need to go aio

@ffblegend Ай бұрын

Does the softeare have to stay running to keep your display settings?

@IcH6646 10 күн бұрын

@ffblegend 10 күн бұрын

@@IcH6646 pretty sure it does…I have a display set and it goes back to default on display if I close the NZXT software

@IcH6646 10 күн бұрын

@@ffblegend there is an option that says "run in background when closed". Enable it

@lemonloaf 9 ай бұрын

hey my motherboard doesn’t have a aio option, is it fine to plug it into the cpu fan option?

@lyrictdk 9 ай бұрын

I did that on mine and the pump works fine

@TheProvokedPrawn 9 ай бұрын

Yes

@lemonloaf 9 ай бұрын

@@lyrictdk thank you!

@lemonloaf 9 ай бұрын

@@TheProvokedPrawn thank you!

@MrMulti82 3 ай бұрын

What about bios setup?

@samwilliamson4863 6 ай бұрын

Got all the way through the build and there not video of where to connect the sata cable to the psu now im stuck

@TheProvokedPrawn 6 ай бұрын

To the sata cable from your PSU? It is the same one you use for HDD/SSD. See here kzfaq.info/get/bejne/qdB1fdWdl5-YnX0.html

@pro_killdroid 6 ай бұрын

I have connected everything the way you showed, exactly as you showed. But the cam software doesn’t recognize the aio, it lights up and shows temp, but the software doesn’t recognize it at all.

@pro_killdroid 6 ай бұрын

The video is great, but Im not sure what to do.

@TheProvokedPrawn 6 ай бұрын

Is it possible the usb connection is loose? Or can the use another port on the motherboard,

@pro_killdroid 6 ай бұрын

@@TheProvokedPrawn I tried both ports, I have a asus b550 plus

@pro_killdroid 6 ай бұрын

@@TheProvokedPrawn is the usb hub necessary?

@054efe 8 ай бұрын

is it bad to have 4 intake and 1 exhaust fan?

@TruSolja 6 ай бұрын

if you have 5 fans, you should do 3 intake and 2 exhaust

@coolman9970 8 ай бұрын

does any usb slot work for this or does it have to be a usb 2.0????

@bingus5863 8 ай бұрын

It has to be a 9 pin usb header

@coolman9970 8 ай бұрын

@@bingus5863 thank you

@bingus5863 8 ай бұрын

@@coolman9970 you’re welcome 🙏

@tylermyers4105 6 ай бұрын

I installed this on my hp omen and now it starts and then loses connection to hdmi.

@HaloMediaRecords Ай бұрын

The aio tube is so short it blocks off your ram. Spent all this time installing to find out the tubing is damn short for the 360 version

@user-vy3go6km1r 6 ай бұрын

Dumb question, but I never installed a water cooling kit before... Is the water already inside? I get a bit confused sometimes because I see these guys in videos pumping water in their pc and there's a reservoir, but sometimes there's none of that...

@TheProvokedPrawn 6 ай бұрын

not dumb, a lot of people ask. So, this is what's called an "all-in-one" cooler. Which means the pump is in there as is the coolant already. You don't need to fill it and indeed you couldn't even if you wanted to as it's sealed. The other videos you've seen will be of custom loop systems, which are completely different and require liquid and a lot more effort. AIO coolers are much more user (and beginner) friendly.

@dylan7ludlam 2 ай бұрын

What if your mother board doesn’t have any usb slots

@TheProvokedPrawn 2 ай бұрын

Surely you have at least 1? If that's the case then kzfaq.info/get/bejne/mp6meK-TvL3Fc4U.html

@iceeaglert 8 ай бұрын

As a pc builder … these are awesome but the fans / setup are absolutely terrible compared to Corsair / Lian li

@TheDonshaz 8 ай бұрын

Why

@delilahgarcia7483 7 ай бұрын

I got this for my boyfriend and I have a question do you have to change the water every couple months or something ????

@DriplordVR 7 ай бұрын

@@delilahgarcia7483from my knowledge you do not have to do anything with the liquid. But I may be wrong so do some research

@Yelrahh 7 ай бұрын

@@delilahgarcia7483no you don't have to change the liquid at all.

@Jeffmd2020 Ай бұрын

@iceeaglert I’m also curious as to why you feel this way about the fans/setup of this AIO? I’m looking to replace my current AIO cooler that came with my prebuilt PC. Already changed my ram, CPU and GPU and since I went from a ryzen 9 7900X to a ryzen 7 7800X3D I want one with a screen to monitor my temps and what I like about this one is the hoses are on the bottom so it’ll clear my ram sticks. My current one has the hoses on left side of the pump head. I’m just looking to upgrade and hopefully help with my GPU temps also. I’m currently running a 240mm 2 fan AIO I’d love to go to a 340mm but I don’t know if it’ll fit or not…

@geniusprojectfiles 6 ай бұрын

I didn’t see you connect the sata cable to psu?

@VR_Chain 12 күн бұрын

Ya I didn't see him do that either is that what I'm suppose to do???

@CathoolEditz 3 ай бұрын

The leo dicaprio painting in the background💀

@ben_wesker 8 ай бұрын

Is this good for i514600k?

@TheProvokedPrawn 8 ай бұрын

yes

@ben_wesker 8 ай бұрын

@@TheProvokedPrawn thank u sir

@financeinfo01 5 ай бұрын

is it good for i9-14900k

@TheProvokedPrawn 5 ай бұрын

kzfaq.info/get/bejne/ldd6o5t2tKedhZ8.html

@financeinfo01 5 ай бұрын

@@TheProvokedPrawn thanks .. can you suggest me a best cooler in 360mm aio also i am running 4k monitor 3840 x 2160.. i dont want any thermal throtlling

@TheProvokedPrawn 5 ай бұрын

@@financeinfo01 I personally run this kzfaq.info/get/bejne/aciqhqV8zLvLmKc.html but even so you can still get issues because the i9 is so hot. There are solutions though kzfaq.info/get/bejne/oLZnoaiDyaqRd58.html

@financeinfo01 5 ай бұрын

@@TheProvokedPrawn Thank you for your reply. I am currently using the NZXT Kraken 240 mm AIO cooler, but it is not sufficient for running heavy software (such as Blender) and games. My system crashes and shows a critical temperature error. Do you think the Lian Li Galahad 2 Trinity 360 AIO cooler would solve the thermal throttling issue?

@mathiassolset 7 ай бұрын

so i don’t connect anything to the cpu fan outlet?

@TheProvokedPrawn 7 ай бұрын

You can connect it to CPU fan as an alternative to auto pump but you don't need to unless you're getting errors

@mathiassolset 7 ай бұрын

@@TheProvokedPrawn i have connected it to aio pump. i recivied error that there is no connection to cpu fan. because i have nothing connected to cpu fan. how to fix?

@TheProvokedPrawn 7 ай бұрын

@@mathiassolset kzfaq.info/get/bejne/nOCPoK9o087JnKM.html

@gillynova 9 ай бұрын

Lucky I'm in the market of installing this lmao

@TheProvokedPrawn 9 ай бұрын

Lucky

@7Im8O66 9 ай бұрын

Me 2 tomorrow 😎

@jaderainhans9095 6 ай бұрын

so mine did not come with controller

@redreaper384 4 ай бұрын

Did you get the rgb one

@jaderainhans9095 4 ай бұрын

@@redreaper384 it was non rbg

@ddarkxz_matt5117 6 ай бұрын

My screen won’t light up why is this

@carzzxc 4 ай бұрын

You need the nzxt fan software

@Luc1d._L. 9 ай бұрын

first and nice!

@searchiemusic 7 ай бұрын

mr prawn why are you provoked

@TheProvokedPrawn 7 ай бұрын

Not enough people subscribed

@shreddedcheese6509 2 ай бұрын

Question. I have kraken 360 rgb. When i set it up, i accidentally plugged my header into sys fan 4 and not jusb 1. The pump kinda works but now nzxt cam only displays the pump as system fans. Upon plugging in to the proper usb header, the pump doesnt turn on at all. Any idea on what to do?

@TheProvokedPrawn 2 ай бұрын

Probably best to ask NZXT support

@NeoCreatesStuff 20 күн бұрын

check if you plugged up the sata power connector