Thank you for the video. You have the knowledge and like to help everybody. As I've already said in another video, you should consider a Patreon or any other way so we can help you buy different tools, to try and compare and give us your opinion. Like that, you don't need to spend a lot of money buying scrap clones, but would help us say if it is worth spending the money on it, rework, or better sent it to garbage. I've already read that opinion from another subscriber.

Thank you for making these videos they are very informative.

I have Kess and ktag clone, also MPPS V18 clone, and used it for 2years. And tested them good, here are my experience :) Bricked ecu's on purpose, and tryed recovery on 15 ECU's. All 15 ECU got recovery, one of the cars ( Opel ) i needed to disconnect battery and connect to get contact again and get recovery. All ECU's was EDC15 / 16. ( Not tryed bricked EDC17 yet, will try as fast someone have a car thats going to scrap ) Kess v2 tricore work also good with EDC17C14 :) Good tool for the money, but cheap components and need to remember that one day it mby not gonna work more if your not rework it. Thanks for great video!, love to see videos like this :)

Thanks for the test, very usefull comparison.

Thanks Great demonstration 🎉🎉

Hola amigo excelente video, en mi país no tengo acceso a muchos programadores, tú recomiendas Kess y ktag clone? Agradezco tu respuesta muy buenos videos te ganaste un suscriptor nuevo desde chile!

do you know if this kessv2 on the ecu16c8 is able to read and write only form connecting it on the obd2 port?, because i dont want to take out the ecu of my car. Thx

Great work , you are giving amazing information.can you tell me whatbis the problem with the chinese clone of the kess ? I have one and im geting 'fail to initialize' error... thanks for great vídeos.

Hello whay Kess ecu EDC16C34 only want read when is in the car? But when is out not reading and not identifying. Power Supply good, reading anothers ECUs. Thanks in advance

I just want to backup and put Stage 1 on my Golf 7 TDI with EDC17C64 via OBD, which ones can I use to buy it? 🤔

Danke sehr hilfreich 👍🏽

mpps after downloading the file, do we wait 3 minutes with the ignition on or off?

Hello, yoyo awesome content as always. I wanted to ask you have you ever tried an bmw 5 525d e61 edc16c31 with galleto, it only gives the 3.0d as an option with that ecu is read write possible on the 525d Thank you

Good morning from Andalusia Spain. the videos he makes are great. My question is about kess v2, I have an original that has 10 days left to be blocked due to updating to kess 3, do you know how I can avoid blocking? any crack or hack to do this? Will it work with version clone ksuite? This original machine is slave. on the other hand I have seen that you improve the components for reading in clone kess. Is this so noticeable? My clone version is red plate version 2.47 5.017ktag 7.020. Is it possible to put more protocols than I have? What improves the version 2.47 of the 2.9 in Kess? Official service always scares saying that it blocks control units but I have read and written in fiat edc 15 c34 and it has been correct. By the way, in relation to the video, I have requested a cable for Volvo, original alientech for the edc 16 c34 of a 1.6 c30 volvo diesel, allientech recommends this cable to avoid failures in volvo, as I have access to x-rays I will x-ray the cable and I will tell you what is inside the bridge or resistance between pins. Please send mail for this. Greetings mate.

🇧🇷 Olá amigo eu gostei do vídeo e gostaria de saber mais sobre esse equipamento mpps v21 ou mpps v18 você indicaria eu estou com dúvidas se você poder me ajudar eu agradeço,

Have u tried to flash, probably all of them will brick eeprom! After 2008 c34 is not safe to do in OBD with Genuine tools also. But why not asking! Have a nice day.

which clone card tool to be able to extract the key pin via obd2 for a fiat panda, the person who sold me the car did not give me the codes, and I understood that in theory it is possible to make a backup from the obd2 of the eeprom and extract those two codes (I think they are two). I'm looking but in the meantime I still haven't figured out which eeprom it is and then if there is a low cost / clone card that can do it. I only have to read and not write so regardless of the quality of the device "shouldn't" do damage. 😅. a certain iflash card can do it but it costs a lot of money.😢 I see Delphi ds150 clone but I think 🤔 can not do it.

Is there a difference between PCMTUNER programmer and imitation or emulator PCMTUNER

💯💯💯😍😍💯💯

By the way, I might buy the original fc200, but to clone the edc15 edc 16 machine, which clone do you recommend? Do you know any good davinchi version? and a checksum corrector? to verify file to load is good? greetings and thank you very much

i would like to know what did you do for the car? what was wrong with car ? why u use that software? , thank you

Hallo, was wäre der beste/bessere Programmer für VAGs zwischen 2000-2010? Aktuell will ich eine EDC16U1 wegen dem Warmstartproblem umprogrammieren. :) (A3 1.9TDi)

Hello. I have a question. I have a Peugeot 207 1.4 8v Flex, with ECU Bosch 7.4.9. I have it's map file and now after remapping it's file with a professional guy, want to know that MPPS can write this Remap file on my ecu with OBD2? Thanks

Hi once again! Thank you for another vídeo about this. What you think about DaVinci solutions? Regards

But which one is the best? can i read flash ecu ems 3132 from obd

Do you think its possible to write in this ecu and car without problems using kess v2?

Why do some sellers say mpps clone only good for 10uses? But v21 or v22 good for unlimited?

Is it kess eu clone?I have eu clone kess v2 can i read it with him?

Does this pull a .bin from the ecu? Why I am asking is because I am attempting retrieve the .bin from the ecu and then search for the missing parameters that are not defined.

hi which MPPS do you use V16 ,V18 , 21 ???..Thanks

Kess in obd non funziona edc16c34